{"title":"Heavy Equipment Attachment Adapters","description":"\u003cp\u003eLANDYINDUS attachment adapters help dealers, contractors, farms, rental fleets, and equipment owners connect a machine to an attachment when the original mounting system is not the right match. A properly specified adapter can extend the useful life of a loader or excavator, but the source interface and the target attachment must be confirmed before fabrication or quoting.\u003c\/p\u003e\u003ch2\u003eChoose the source and target interface\u003c\/h2\u003e\u003cp\u003eStart with the machine model and the coupler or three-point hitch already on the machine. Then identify the attachment interface you need to accept. Our range includes three-point-hitch to skid-steer quick-attach plates, A-Frame to Euro or SMS brackets, Big BM and BO\/BK conversion plates, blank plates for custom fabrication, and excavator mechanical quick-hitch adapters such as S30-to-S40 or S40-to-S50 conversions. If the attachment is hydraulic, also confirm the auxiliary circuit, flow and pressure before selecting an adapter.\u003c\/p\u003e\u003cp\u003eUse the \u003ca href=\"\/collections\/skid-steer-grapples\"\u003eskid steer grapples\u003c\/a\u003e, \u003ca href=\"\/collections\/skid-steer-buckets\"\u003eskid steer buckets\u003c\/a\u003e, \u003ca href=\"\/collections\/skid-steer-brush-cutters-mulchers\"\u003ebrush cutters and mulchers\u003c\/a\u003e, and \u003ca href=\"\/collections\/skid-steer-pallet-forks\"\u003epallet forks\u003c\/a\u003e collections to review tools that may be paired with a converted interface. Excavator owners can compare forestry tools in \u003ca href=\"\/collections\/excavator-forestry-attachments\"\u003eExcavator Forestry Attachments\u003c\/a\u003e, while the \u003ca href=\"\/pages\/applications\"\u003eapplications hub\u003c\/a\u003e explains common machine-to-tool combinations.\u003c\/p\u003e\u003ch2\u003eSpecifications to confirm before a quote\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachine make, model, operating weight and existing coupler or hitch class.\u003c\/li\u003e\n\u003cli\u003eSource and target interface names, pin diameter, pin spacing, mounting width and locking method.\u003c\/li\u003e\n\u003cli\u003eAdapter weight, available clearance, lift capacity and the attachment's center of gravity.\u003c\/li\u003e\n\u003cli\u003eHydraulic flow, operating pressure and hose or valve requirements for powered attachments.\u003c\/li\u003e\n\u003cli\u003ePhotos, drawings or measured pin dimensions when the interface is uncommon or custom.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese details allow LANDYINDUS to check fitment, structural requirements, freight dimensions and the most practical standard or custom configuration. Do not assume that a similar-looking coupler will fit without measurement.\u003c\/p\u003e\u003ch2\u003eAttachment adapter FAQ\u003c\/h2\u003e\u003ch3\u003eCan one adapter fit every skid steer or loader?\u003c\/h3\u003e\u003cp\u003eNo. Fitment depends on the machine's quick-attach geometry, pin pattern, width, locking points and rated capacity. Send the exact model and measurements for confirmation.\u003c\/p\u003e\u003ch3\u003eCan an adapter be used with a hydraulic attachment?\u003c\/h3\u003e\u003cp\u003eSometimes. The adapter must preserve safe clearance and the machine must provide the flow, pressure, hoses and controls required by the attachment.\u003c\/p\u003e\u003ch3\u003eDo you make custom conversion plates?\u003c\/h3\u003e\u003cp\u003eCustom and OEM work may be available when drawings or clear photos are supplied. Requirements are reviewed before a quote is issued.\u003c\/p\u003e\u003ch3\u003eHow do I request pricing?\u003c\/h3\u003e\u003cp\u003eSend the machine, interface, target attachment and dimensions through \u003ca href=\"\/pages\/contact-us\"\u003eRequest a Quote\u003c\/a\u003e. LANDYINDUS will confirm the configuration before pricing.\u003c\/p\u003e","products":[{"product_id":"excavator-mechanical-quick-hitch-adapter-s30-to-s40-s40-to-s50-coupler-conversion","title":"Excavator Mechanical Quick Hitch Adapter | S30 to S40 \/ S40 to S50 Coupler Conversion","description":"\u003ch2\u003eExcavator Mechanical Quick Hitch Coupler Adapter – S30 to S40 \/ S40 to S50 Bracket Conversion\u003c\/h2\u003e\n\u003cp\u003eExpand your excavator's attachment compatibility with the \u003cstrong\u003eLANDYINDUS Mechanical Quick Hitch Coupler Adapter\u003c\/strong\u003e. Designed to bridge the dimensional gap between S30, S40, and S50 pin-on bracket standards, this adapter lets you run larger-class attachments on a smaller-class excavator — no new machine, no duplicate attachments required.\u003c\/p\u003e\n\u003cp\u003eIdeal for \u003cstrong\u003econtractors, hire companies, and civil works operators\u003c\/strong\u003e managing mixed excavator fleets who want to maximise return on existing attachment investments.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminate Compatibility Barriers:\u003c\/strong\u003e Run S40 or S50-class buckets, hammers, augers, and compaction plates on smaller-bracket excavators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce Capital Expenditure:\u003c\/strong\u003e One adapter serves multiple machines — simplify inventory and improve fleet utilisation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Permanent Modification:\u003c\/strong\u003e Direct pin-on installation using existing bracket pins — no welding or drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Positive-Lock Design:\u003c\/strong\u003e Secure connection with no hydraulic lines, solenoids, or electrical components to fail on site\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Steel Construction:\u003c\/strong\u003e Built to withstand dynamic loads, impact forces, and cyclic stresses in demanding conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-S30 to S40:\u003c\/strong\u003e 656 × 220 × 265 mm | 50 kg — Run S40-class attachments on S30-bracket excavators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-S40 to S50:\u003c\/strong\u003e 763 × 268 × 310 mm | 91 kg — Run S50-class attachments on S40-bracket excavators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCivil construction \u0026amp; bulk earthworks\u003c\/li\u003e\n\u003cli\u003eRoad works \u0026amp; trenching\u003c\/li\u003e\n\u003cli\u003eDemolition \u0026amp; site preparation\u003c\/li\u003e\n\u003cli\u003eQuarrying \u0026amp; mining operations\u003c\/li\u003e\n\u003cli\u003eMixed-fleet attachment standardisation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBracket Standards: S30 \/ S40 \/ S50 pin-on\u003c\/li\u003e\n\u003cli\u003eInstallation: Pin-on, no welding or drilling required\u003c\/li\u003e\n\u003cli\u003eMaterial: High-strength structural steel\u003c\/li\u003e\n\u003cli\u003eME-S30→S40: 656×220×265 mm, 50 kg\u003c\/li\u003e\n\u003cli\u003eME-S40→S50: 763×268×310 mm, 91 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTechnical Drawing:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260618173102_005.jpg?v=1781775145\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eSelect the model that matches your excavator's existing bracket standard. \u003cstrong\u003eContact LANDYINDUS\u003c\/strong\u003e for bracket compatibility advice, volume pricing, or OEM inquiries.\u003c\/p\u003e","brand":"landyindus","offers":[{"title":"Default Title","offer_id":48283423310069,"sku":"ME-S30 TO S40","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260618173102_001_d7faa3d9-0691-4f0d-98de-6bef4b4aabdf.jpg?v=1781775225"},{"product_id":"landyindus-3-point-hitch-to-a-type-quick-coupler-adapter-cat-1-cat-2-cat-3-tractor","title":"LANDYINDUS 3 Point Hitch to A-Type Quick Coupler Adapter | Cat 1 Cat 2 Cat 3 Tractor","description":"\u003ch2\u003eLANDYINDUS 3 Point Hitch to A-Type Quick Coupler Adapter | Cat 1 Cat 2 Cat 3 Tractor Front Loader Converter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-3POINT TO A Series\u003c\/strong\u003e is the versatile conversion solution for tractor operators who want to unlock the full A-type front loader attachment ecosystem on machines equipped with \u003cstrong\u003eCategory 1, Category 2, or Category 3 three-point hitch systems\u003c\/strong\u003e. By converting the standard three-point hitch interface to a fully compatible A-type quick coupler mounting face, this adapter gives operators immediate access to A-type compatible attachments — including buckets, pallet forks, bale spikes, grapples, and sweeper brooms — without requiring a dedicated front loader frame or a separate machine investment.\u003c\/p\u003e\n\u003ch3\u003eThree Models — Cat 1, Cat 2 \u0026amp; Cat 3 | Adjustable Spread Length Within Each Category\u003c\/h3\u003e\n\u003cp\u003eAvailable in three configurations to match the three most common tractor hitch categories, the T-3POINT TO A series covers the broadest possible range of compatible machines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-3POINT CAT 1 TO A\u003c\/strong\u003e — Spread 644–808mm | Height 671mm | 37kg | Suits compact \u0026amp; sub-compact tractors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-3POINT CAT 2 TO A\u003c\/strong\u003e — Spread 783–963mm | Height 684mm | 41kg | Suits mid-size tractors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-3POINT CAT 3 TO A\u003c\/strong\u003e — Spread 942–1,122mm | Height 706mm | 44kg | Suits large-frame tractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003eadjustable spread length design\u003c\/strong\u003e accommodates a range of widths within each category — allowing the adapter to fit correctly across different tractor brands and models without requiring custom spacers, shims, or modification. This adjustability significantly reduces compatibility issues when fitting across tractors from different manufacturers.\u003c\/p\u003e\n\u003ch3\u003eA-Type Quick Coupler Interface — Full Attachment Ecosystem Access Without a Dedicated Loader\u003c\/h3\u003e\n\u003cp\u003eOnce installed on the tractor's three-point hitch, the \u003cstrong\u003eA-type quick coupler interface\u003c\/strong\u003e on the front face of the adapter accepts any A-type compatible attachment using the standard quick-attach process — allowing operators to swap between tools quickly and without specialised equipment. The secure, rigid connection maintains full load control throughout lifting, carrying, and positioning operations, ensuring that the attached tool performs exactly as it would on a dedicated front loader machine.\u003c\/p\u003e\n\u003ch3\u003eHigh-Strength Steel | Precision-Welded Joints — Built for Repeated Front Loader Stress Cycles\u003c\/h3\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003ehigh-strength steel with precision-welded joints\u003c\/strong\u003e and a robust frame designed to handle the repeated stress cycles of front loader work, the T-3POINT TO A adapter is built for long service life in demanding agricultural and construction environments. The compact frame profile keeps the adapter's footprint minimal, preserving the tractor's effective working reach and front-end balance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Cat 1, Cat 2 \u0026amp; Cat 3 three-point hitch to A-type quick coupler interface\u003c\/li\u003e\n\u003cli\u003eAdjustable spread length — fits multiple brands \u0026amp; models within each hitch category\u003c\/li\u003e\n\u003cli\u003eFull A-type attachment ecosystem — buckets, pallet forks, bale spikes, grapples \u0026amp; more\u003c\/li\u003e\n\u003cli\u003eNo dedicated front loader frame required — immediate attachment versatility on existing tractor\u003c\/li\u003e\n\u003cli\u003eStandard A-type quick-attach process — fast tool changes without specialised equipment\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded joints — long service life under repeated load cycles\u003c\/li\u003e\n\u003cli\u003eCompact frame profile — preserves working reach \u0026amp; front-end balance\u003c\/li\u003e\n\u003cli\u003e37–44kg across three models — practical single-person handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806145924_005.jpg?v=1786000276\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (L×W×H) mm\u003c\/th\u003e\n\u003cth\u003eSpread Length (mm)\u003c\/th\u003e\n\u003cth\u003eVertical Height (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-3POINT CAT 1 TO A\u003c\/td\u003e\n\u003ctd\u003e808×175×730\u003c\/td\u003e\n\u003ctd\u003e644–808\u003c\/td\u003e\n\u003ctd\u003e671\u003c\/td\u003e\n\u003ctd\u003eCat 1\u003c\/td\u003e\n\u003ctd\u003e37\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-3POINT CAT 2 TO A\u003c\/td\u003e\n\u003ctd\u003e963×175×743\u003c\/td\u003e\n\u003ctd\u003e783–963\u003c\/td\u003e\n\u003ctd\u003e684\u003c\/td\u003e\n\u003ctd\u003eCat 2\u003c\/td\u003e\n\u003ctd\u003e41\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-3POINT CAT 3 TO A\u003c\/td\u003e\n\u003ctd\u003e1122×175×765\u003c\/td\u003e\n\u003ctd\u003e942–1122\u003c\/td\u003e\n\u003ctd\u003e706\u003c\/td\u003e\n\u003ctd\u003eCat 3\u003c\/td\u003e\n\u003ctd\u003e44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48511068963061,"sku":"T-3POINT CAT 1 TO A","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806145924_001.jpg?v=1786000439"},{"product_id":"landyindus-bo-bk-to-sms-euro-quick-attach-adapter-heavy-duty-loader-conversion-mounting-plate","title":"LANDYINDUS BO BK to SMS \u0026 Euro Quick Attach Adapter | Heavy Duty Loader Conversion Mounting Plate","description":"\u003ch2\u003eLANDYINDUS T-BO BK TO SMS\/EURO Heavy Duty BO BK to SMS \u0026amp; Euro Quick Attach Adapter | Loader Conversion Mounting Plate\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-BO BK TO SMS\/EURO\u003c\/strong\u003e is a heavy-duty conversion mounting plate engineered for operators who need a single, reliable solution to connect \u003cstrong\u003eBO BK coupler systems to both SMS and Euro quick attach-compatible attachments\u003c\/strong\u003e. Built for full-size excavators, loaders, and agricultural machinery, this dual-system conversion plate delivers a rigid, zero-play connection that holds up under continuous load across construction, earthmoving, and farming applications.\u003c\/p\u003e\n\u003ch3\u003eDual-System Compatibility — One Plate Converts BO BK to Both SMS \u0026amp; Euro Standards\u003c\/h3\u003e\n\u003cp\u003eConverts BO BK coupler systems to \u003cstrong\u003eboth SMS and Euro quick attach standards in a single adapter plate\u003c\/strong\u003e — eliminating the need for two separate conversion brackets. Compatible with a wide range of machine brands and models running SMS-standard or Euro-standard buckets, pallet forks, grapples, bale clamps, augers, and other attachments. No permanent modification or welding required.\u003c\/p\u003e\n\u003ch3\u003ePrecision-Machined Zero-Play Fit — Maximum Load Transfer, No Rattle or Wear\u003c\/h3\u003e\n\u003cp\u003eEngineered to \u003cstrong\u003etight tolerances for a secure, zero-play connection\u003c\/strong\u003e between the BO BK carrier and SMS or Euro attachments — maximising load transfer efficiency and eliminating the rattle and wear associated with loose-fitting conversion brackets. The precision-machined interface maintains alignment under repeated heavy-cycle loading and high-impact applications.\u003c\/p\u003e\n\u003ch3\u003eHigh-Strength Structural Steel | Wear-Resistant Surface Treatment — Long Service Life in Harsh Environments\u003c\/h3\u003e\n\u003cp\u003eFabricated from \u003cstrong\u003ehigh-strength structural steel with a wear-resistant surface treatment\u003c\/strong\u003e, the T-BO BK TO SMS\/EURO is built to withstand demanding daily use in harsh outdoor environments. The robust construction ensures long service life even under repeated heavy-cycle loading across construction, earthmoving, and agricultural applications.\u003c\/p\u003e\n\u003ch3\u003eFast Tool-Free Installation — Switch Between SMS \u0026amp; Euro Attachments in the Field\u003c\/h3\u003e\n\u003cp\u003eDesigned for \u003cstrong\u003equick, tool-free coupling and decoupling\u003c\/strong\u003e, this adapter integrates seamlessly with standard BO BK coupler systems. Switch between SMS and Euro attachments in the field without downtime, without tools, and without permanent modifications to your equipment — maximising machine versatility across mixed-attachment job sites.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle plate converts BO BK to both SMS \u0026amp; Euro — no two separate brackets needed\u003c\/li\u003e\n\u003cli\u003ePrecision-machined zero-play fit — maximum load transfer, eliminates rattle \u0026amp; wear\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel | wear-resistant surface treatment — harsh environment durability\u003c\/li\u003e\n\u003cli\u003eTool-free coupling \u0026amp; decoupling — fast SMS\/Euro attachment changes in the field\u003c\/li\u003e\n\u003cli\u003eNo permanent modification or welding required\u003c\/li\u003e\n\u003cli\u003e1,204×150×600mm | 87kg — full-size excavator \u0026amp; loader dimensions, low-profile 150mm depth\u003c\/li\u003e\n\u003cli\u003eCompatible with buckets, pallet forks, grapples, bale clamps \u0026amp; augers across multiple brands\u003c\/li\u003e\n\u003cli\u003eSuited to fleet operators, contractors \u0026amp; equipment rental companies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806154343_005.jpg?v=1786002391\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eDepth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-BO BK TO SMS\/EURO\u003c\/td\u003e\n\u003ctd\u003e1204\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003e87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48511134793973,"sku":"T-BO BK TO SMS\/EURO","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806154343_001.jpg?v=1786002419"},{"product_id":"landyindus-3-point-hitch-to-euro-sms-front-loader-adapter-cat-2-tractor-quick-attach-converter","title":"LANDYINDUS 3 Point Hitch to Euro \u0026 SMS Front Loader Adapter | Cat 2 Tractor Quick Attach Converter","description":"\u003ch2\u003eLANDYINDUS T-3POINT TO SMS\/EURO 3 Point Hitch to Euro \u0026amp; SMS Front Loader Adapter | Cat 2 Tractor Quick Attach Converter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-3POINT TO SMS\/EURO\u003c\/strong\u003e is the essential conversion attachment for tractor operators who want to use \u003cstrong\u003eEuro and SMS-compatible front loader attachments on a machine equipped with a standard Category 2 three-point hitch\u003c\/strong\u003e. By bridging the gap between the three-point hitch mounting system and the Euro\/SMS quick-attach interface, this heavy-duty adapter unlocks access to the full range of Euro and SMS front loader tools — including buckets, pallet forks, bale spikes, grapples, and sweeper attachments — without requiring a dedicated front loader frame or a separate tractor.\u003c\/p\u003e\n\u003ch3\u003eSolves the Cat 2 Three-Point Hitch to Euro\/SMS Compatibility Gap — Single Bolt-On Installation\u003c\/h3\u003e\n\u003cp\u003eTractors fitted with a three-point hitch are among the most common machines on farms, estates, and construction sites worldwide, but they are not natively compatible with the Euro and SMS attachment ecosystem that dominates the front loader attachment market. The T-3POINT TO SMS\/EURO \u003cstrong\u003esolves this compatibility gap in a single, bolt-on installation\u003c\/strong\u003e — giving operators the flexibility to run Euro and SMS attachments on their existing three-point hitch tractor without investing in a full front loader conversion or purchasing a second machine.\u003c\/p\u003e\n\u003ch3\u003eEuro SMS Combi Interface — Full Quick-Attach Ecosystem Access on Cat 2 Tractors\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eEuro SMS combi interface\u003c\/strong\u003e on the front face of the adapter is fully compatible with the standard Euro and SMS quick-attach systems used across the widest range of front loader attachments available in the market today. Once installed, operators can quickly swap between any Euro or SMS-compatible attachment — from standard buckets and pallet forks to specialist tools like bale grabs, log grapples, and angle brooms — using the same \u003cstrong\u003efast, tool-free quick-attach process\u003c\/strong\u003e that dedicated front loader machines use.\u003c\/p\u003e\n\u003ch3\u003eHigh-Strength Steel | Precision-Welded Construction — Full Rated Capacity Under Repeated Load Cycles\u003c\/h3\u003e\n\u003cp\u003eThe robust steel frame — measuring \u003cstrong\u003e1,010 × 290 × 715mm and weighing 92kg\u003c\/strong\u003e — delivers the structural rigidity needed to handle the stresses of front loader work at full rated capacity. Built from \u003cstrong\u003ehigh-strength steel with precision-welded construction throughout\u003c\/strong\u003e, the adapter is engineered for long service life under the repeated load cycles and outdoor conditions of professional agricultural and construction use. The 92kg attachment weight keeps the overall front-end load within practical operating limits for compatible Cat 2 tractors.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Cat 2 three-point hitch to Euro \u0026amp; SMS quick-attach interface — single bolt-on installation\u003c\/li\u003e\n\u003cli\u003eEuro SMS combi interface — full front loader attachment ecosystem without a dedicated loader tractor\u003c\/li\u003e\n\u003cli\u003eFast, tool-free quick-attach process — same as dedicated front loader machines\u003c\/li\u003e\n\u003cli\u003eSuits buckets, pallet forks, bale spikes, grapples, bale grabs, log grapples \u0026amp; angle brooms\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded construction — full rated capacity under repeated load cycles\u003c\/li\u003e\n\u003cli\u003e1,010×290×715mm | 92kg — structural rigidity within Cat 2 front-end load limits\u003c\/li\u003e\n\u003cli\u003eNo dedicated front loader frame or second machine required\u003c\/li\u003e\n\u003cli\u003eSuited to farms, estates, construction sites \u0026amp; mixed-fleet operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806154921_004.jpg?v=1786002837\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-3POINT TO SMS\/EURO\u003c\/td\u003e\n\u003ctd\u003e1010\u003c\/td\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003ctd\u003e715\u003c\/td\u003e\n\u003ctd\u003eCat 2\u003c\/td\u003e\n\u003ctd\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48511148622069,"sku":"T-3POINT TO SMS\/EURO","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806154921_001.jpg?v=1786002851"},{"product_id":"landyindus-big-bm-to-sms-euro-quick-coupler-adapter-front-loader-conversion-bracket-heavy-duty-steel","title":"LANDYINDUS Big BM to SMS \u0026 Euro Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel","description":"\u003ch2\u003eLANDYINDUS T-BIG BM TO SMS\/EURO Big BM to SMS \u0026amp; Euro Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-BIG BM TO SMS\/EURO\u003c\/strong\u003e is the heavy-duty conversion bracket engineered for operators of \u003cstrong\u003eVolvo BM and Big BM-equipped front loader machines\u003c\/strong\u003e who need to connect and operate SMS-compatible or Euro-compatible attachments on their existing loader setup. By converting the Big BM mounting interface to a \u003cstrong\u003edual-standard SMS and Euro quick-attach face\u003c\/strong\u003e, this adapter provides access to two of the most widely supported attachment ecosystems in European and Scandinavian agricultural and construction markets — all within a single, robust conversion solution.\u003c\/p\u003e\n\u003ch3\u003eDual SMS \u0026amp; Euro Output Interface — Maximum Attachment Sourcing Flexibility Across Both Standards\u003c\/h3\u003e\n\u003cp\u003eRather than converting to a single attachment standard, the T-BIG BM TO SMS\/EURO provides compatibility with \u003cstrong\u003eboth the SMS quick-attach system\u003c\/strong\u003e (predominant in Scandinavian markets) \u003cstrong\u003eand the Euro quick-attach system\u003c\/strong\u003e (dominant across broader European markets). This dual compatibility gives operators maximum flexibility when sourcing attachments — allowing them to purchase from the widest possible range of compatible tools regardless of which specific interface standard the attachment manufacturer uses. Suits buckets, pallet forks, bale spikes, grapples, and sweeper brooms across both ecosystems.\u003c\/p\u003e\n\u003ch3\u003eBig BM Interface — Resolves Volvo BM to Modern SMS\/Euro Compatibility Gap Without Loader Replacement\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBig BM interface standard\u003c\/strong\u003e is closely associated with Volvo BM series tractors and large-frame front loader machines widely used across Scandinavian and Northern European agricultural operations. While these machines are proven performers in demanding field conditions, their Big BM mounting interface is not directly compatible with the SMS and Euro attachment standards that dominate the current front loader attachment market. The T-BIG BM TO SMS\/EURO \u003cstrong\u003eresolves this compatibility gap completely\u003c\/strong\u003e — allowing operators to run modern SMS and Euro-standard attachments on their existing Big BM loader without replacing the loader frame or investing in a new machine.\u003c\/p\u003e\n\u003ch3\u003e1,159 × 311 × 769mm | 112kg — Built for Large-Frame Loader Breakout Forces \u0026amp; Full Rated Capacity\u003c\/h3\u003e\n\u003cp\u003eThe adapter measures \u003cstrong\u003e1,159 × 311 × 769mm and weighs 112kg\u003c\/strong\u003e — dimensions that provide a stable, well-proportioned mounting profile for large-capacity loader arms. The 112kg construction reflects the heavy-duty engineering required to safely handle the high breakout forces, lift capacities, and dynamic loads generated by large Volvo BM and Big BM-class front loader machines operating at full rated capacity across agricultural, construction, and material handling applications.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Big BM (Volvo BM) front loader to dual SMS \u0026amp; Euro quick-attach — single conversion bracket\u003c\/li\u003e\n\u003cli\u003eDual SMS \u0026amp; Euro output — maximum attachment sourcing flexibility across both standards\u003c\/li\u003e\n\u003cli\u003eResolves Big BM to modern SMS\/Euro compatibility gap — no loader frame replacement needed\u003c\/li\u003e\n\u003cli\u003eSuits buckets, pallet forks, bale spikes, grapples \u0026amp; sweeper brooms across SMS \u0026amp; Euro ecosystems\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded joints — repeated heavy-duty front loader stress cycles\u003c\/li\u003e\n\u003cli\u003e1,159×311×769mm | 112kg — large-frame loader breakout forces \u0026amp; full rated capacity\u003c\/li\u003e\n\u003cli\u003eSuited to Volvo BM tractor owners, large-frame loader operators \u0026amp; agricultural contractors\u003c\/li\u003e\n\u003cli\u003eScandinavian \u0026amp; Northern European agricultural \u0026amp; construction fleet compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806160859_005.jpg?v=1786003957\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-BIG BM TO SMS\/EURO\u003c\/td\u003e\n\u003ctd\u003e1159\u003c\/td\u003e\n\u003ctd\u003e311\u003c\/td\u003e\n\u003ctd\u003e769\u003c\/td\u003e\n\u003ctd\u003eBIG BM\u003c\/td\u003e\n\u003ctd\u003e112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48511225659637,"sku":"T-BIG BM TO SMS\/EURO","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260806160859_001.jpg?v=1786003981"},{"product_id":"landyindus-a-frame-to-euro-quick-coupler-adapter-front-loader-conversion-bracket-heavy-duty-steel","title":"LANDYINDUS A-Frame to Euro Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel","description":"\u003ch2\u003eLANDYINDUS T-A TO EURO A-Frame to Euro Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-A TO EURO\u003c\/strong\u003e is the direct conversion bracket that enables front loader machines equipped with an \u003cstrong\u003eA-type frame mounting system to run the full range of Euro-compatible attachments\u003c\/strong\u003e — including Euro buckets, pallet forks, bale spikes, log grapples, sweeper brooms, and a wide variety of specialist front loader tools. By converting the A-frame interface on the machine side to a standard Euro quick-attach face on the attachment side, this adapter bridges one of the most common compatibility gaps in the front loader attachment market.\u003c\/p\u003e\n\u003ch3\u003eA-Frame to Euro — Immediate Access to the Largest Euro Attachment Ecosystem Without Loader Replacement\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eEuro quick coupler standard is the dominant attachment interface across the European front loader market\u003c\/strong\u003e, supported by the broadest range of compatible tools from the widest variety of manufacturers. For operators whose machines are fitted with A-type frame mounting systems — common on many European tractor-mounted front loaders and compact loader machines — the T-A TO EURO \u003cstrong\u003eeliminates the A-frame to Euro compatibility gap entirely\u003c\/strong\u003e, allowing operators to purchase and use any Euro-compatible attachment on their A-frame machine without modification, custom fabrication, or the expense of replacing the existing loader frame.\u003c\/p\u003e\n\u003ch3\u003eNo Welding, Cutting, or Permanent Modification — Pin \u0026amp; Retainer Mount, Lever-Operated Euro Quick-Attach\u003c\/h3\u003e\n\u003cp\u003eInstallation requires \u003cstrong\u003eno welding, cutting, or permanent modification\u003c\/strong\u003e to the existing loader frame or machine. The adapter mounts directly to the A-frame using the \u003cstrong\u003estandard pin and retainer configuration\u003c\/strong\u003e, and the Euro face accepts attachments using the same lever-operated quick-attach mechanism that operators of Euro-equipped machines already use. Once installed, the connection is \u003cstrong\u003erigid and play-free\u003c\/strong\u003e, maintaining full load control and attachment stability throughout the complete range of front loader operating motions.\u003c\/p\u003e\n\u003ch3\u003e1,106 × 254 × 694mm | 49kg — Low-Profile Form Factor, Minimal Additional Reach \u0026amp; Front-End Load\u003c\/h3\u003e\n\u003cp\u003eThe adapter measures \u003cstrong\u003e1,106 × 254 × 694mm and weighs 49kg\u003c\/strong\u003e — a compact, low-profile form factor that minimises the additional reach and weight added between the machine arm and the attachment. The 49kg front-end load addition remains within practical operating limits for compatible A-frame loader machines while delivering the full structural rigidity needed to handle lifting, carrying, and positioning demands at rated capacity.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts A-frame front loader to Euro quick-attach — full Euro attachment ecosystem access\u003c\/li\u003e\n\u003cli\u003eNo welding, cutting, or permanent modification — pin \u0026amp; retainer mount to existing A-frame\u003c\/li\u003e\n\u003cli\u003eLever-operated Euro quick-attach — same process as dedicated Euro-equipped machines\u003c\/li\u003e\n\u003cli\u003eRigid, play-free connection — full load control across complete front loader operating range\u003c\/li\u003e\n\u003cli\u003eSuits Euro buckets, pallet forks, bale spikes, log grapples, sweeper brooms \u0026amp; specialist tools\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded joints — repeated front loader stress cycles\u003c\/li\u003e\n\u003cli\u003e1,106×254×694mm | 49kg — low-profile, minimal additional reach \u0026amp; front-end load\u003c\/li\u003e\n\u003cli\u003eSuited to tractor owners, loader operators, farm managers \u0026amp; equipment contractors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807140010_005.jpg?v=1786082624\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-A TO EURO\u003c\/td\u003e\n\u003ctd\u003e1106\u003c\/td\u003e\n\u003ctd\u003e254\u003c\/td\u003e\n\u003ctd\u003e694\u003c\/td\u003e\n\u003ctd\u003eA\u003c\/td\u003e\n\u003ctd\u003e49\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48514679111925,"sku":"T-A TO EURO","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807140010_001.jpg?v=1786082657"},{"product_id":"landyindus-a-frame-to-sms-quick-coupler-adapter-front-loader-conversion-bracket-heavy-duty-steel","title":"LANDYINDUS A-Frame to SMS Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel","description":"\u003ch2\u003eLANDYINDUS T-A TO SMS A-Frame to SMS Quick Coupler Adapter | Front Loader Conversion Bracket | Heavy Duty Steel\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-A TO SMS\u003c\/strong\u003e is the precision-engineered conversion bracket that allows front loader machines equipped with an \u003cstrong\u003eA-type frame mounting system to connect and operate the full range of SMS-compatible attachments\u003c\/strong\u003e — including SMS buckets, pallet forks, bale spikes, grapples, and a wide variety of specialist front loader tools. By converting the A-frame interface on the machine side to a standard SMS quick-attach face on the attachment side, this adapter bridges one of the most common compatibility gaps encountered by operators working with A-frame loaders in SMS-dominant markets.\u003c\/p\u003e\n\u003ch3\u003eA-Frame to SMS — Full Scandinavian Multi-Standard Attachment Ecosystem on A-Frame Loaders\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eSMS standard — Scandinavian Multi-Standard — is the primary quick coupler interface\u003c\/strong\u003e used across Scandinavian and Northern European agricultural and construction markets, widely supported by attachment manufacturers across the region. For operators whose front loaders are fitted with A-type frame mounting systems, direct SMS compatibility is not available without a conversion adapter. The T-A TO SMS \u003cstrong\u003esolves this problem directly\u003c\/strong\u003e — enabling operators to purchase and use any SMS-compatible attachment on their A-frame machine without modification, custom fabrication, or the cost of replacing the existing loader frame.\u003c\/p\u003e\n\u003ch3\u003eNo Welding, Cutting, or Permanent Modification — Pin \u0026amp; Retainer Mount, Standard SMS Quick-Attach Engagement\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and does not require welding, cutting, or permanent alteration to the existing loader frame or machine structure. The adapter \u003cstrong\u003emounts to the A-frame using the standard pin and retainer configuration\u003c\/strong\u003e, and the SMS face accepts any SMS-compatible tool using the standard SMS quick-attach engagement process. Once installed, the connection maintains \u003cstrong\u003efull rigidity and load control\u003c\/strong\u003e throughout the complete range of front loader operating motions — from ground-level scooping through to full-height lifting, dumping, and precision placement.\u003c\/p\u003e\n\u003ch3\u003e1,106 × 315 × 694mm | 60kg — 315mm Width for Broad, Stable SMS Mounting Face Contact\u003c\/h3\u003e\n\u003cp\u003eThe adapter measures \u003cstrong\u003e1,106 × 315 × 694mm and weighs 60kg\u003c\/strong\u003e. The \u003cstrong\u003e315mm width\u003c\/strong\u003e ensures broad, stable contact across the SMS mounting face for secure, play-free attachment engagement — built to handle the full structural demands of front loader work at rated capacity. Constructed from \u003cstrong\u003ehigh-strength steel with precision-welded joints\u003c\/strong\u003e engineered to withstand the repeated stress cycles of continuous front loader operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts A-frame front loader to SMS quick-attach — full Scandinavian Multi-Standard attachment ecosystem\u003c\/li\u003e\n\u003cli\u003eNo welding, cutting, or permanent modification — pin \u0026amp; retainer mount to existing A-frame\u003c\/li\u003e\n\u003cli\u003eStandard SMS quick-attach engagement — same process as dedicated SMS-equipped machines\u003c\/li\u003e\n\u003cli\u003eRigid, play-free connection — full load control across complete front loader operating range\u003c\/li\u003e\n\u003cli\u003eSuits SMS buckets, pallet forks, bale spikes, grapples \u0026amp; specialist tools\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded joints — repeated front loader stress cycles\u003c\/li\u003e\n\u003cli\u003e1,106×315×694mm | 60kg — 315mm width for broad, stable SMS mounting face contact\u003c\/li\u003e\n\u003cli\u003eSuited to SMS-dominant Scandinavian \u0026amp; Northern European agricultural \u0026amp; construction markets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807140556_005.jpg?v=1786082941\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-A TO SMS\u003c\/td\u003e\n\u003ctd\u003e1106\u003c\/td\u003e\n\u003ctd\u003e315\u003c\/td\u003e\n\u003ctd\u003e694\u003c\/td\u003e\n\u003ctd\u003eA\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48514699886837,"sku":"T-A TO SMS","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807140556_001.jpg?v=1786082966"},{"product_id":"landyindus-blank-plate-to-big-bm-front-loader-adapter-custom-conversion-bracket-heavy-duty-steel","title":"LANDYINDUS Blank Plate to Big BM Front Loader Adapter | Custom Conversion Bracket | Heavy Duty Steel","description":"\u003ch2\u003eLANDYINDUS T-BK TO BIG BM Blank Plate to Big BM Front Loader Adapter | Custom Conversion Bracket | Heavy Duty Steel\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-BK TO BIG BM\u003c\/strong\u003e is the versatile, universal-base conversion bracket designed for operators and fabricators who need to create a \u003cstrong\u003ecustom or standard Big BM-compatible mounting interface from a clean, unmodified blank plate foundation\u003c\/strong\u003e. By providing a precision-engineered Big BM output interface mounted on a universal blank plate input frame, this adapter gives workshops, equipment dealers, and technically capable operators the flexibility to configure the machine-side mounting to match virtually any front loader arm specification.\u003c\/p\u003e\n\u003ch3\u003eBlank Plate Input — Weld, Bolt, or Machine a Custom Connection to Any Loader Arm Profile\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eblank plate input provides a clean, flat mounting surface\u003c\/strong\u003e to weld, bolt, or machine a custom connection to any specific loader arm profile — without being constrained by a fixed input interface geometry. This makes the T-BK TO BIG BM the ideal solution when standard off-the-shelf adapter configurations do not directly match the host machine's mounting geometry, and the preferred choice for \u003cstrong\u003eloader rebuilds, retrofits, and custom fabrication projects\u003c\/strong\u003e requiring a Big BM output interface.\u003c\/p\u003e\n\u003ch3\u003ePrecision-Machined Big BM Output Face — Correct Interface Dimensions, No Play or Misalignment\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBig BM quick coupler face on the attachment side is precision-machined\u003c\/strong\u003e to the correct Big BM interface dimensions — ensuring that all Big BM-compatible attachments (buckets, pallet forks, bale spikes, grapples, and specialist agricultural tools) engage correctly and securely without play, misalignment, or the need for additional shimming or adjustment. This precision on the output side ensures the custom machine-side connection does not compromise the quality or safety of the final attachment interface.\u003c\/p\u003e\n\u003ch3\u003e1,160 × 130 × 810mm | 80kg — Slim Profile, Minimal Bulk Between Loader Arm \u0026amp; Big BM Interface\u003c\/h3\u003e\n\u003cp\u003eThe adapter measures \u003cstrong\u003e1,160 × 130 × 810mm and weighs 80kg\u003c\/strong\u003e — a slim, elongated profile that minimises the additional bulk and weight added between the loader arm and the Big BM attachment interface. The \u003cstrong\u003enarrow 130mm width\u003c\/strong\u003e reflects the clean, uncluttered blank plate design that makes this adapter easy to work with during custom fabrication and installation, while the 80kg weight keeps additional front-end load within practical limits.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlank plate input — weld, bolt, or machine custom connection to any loader arm profile\u003c\/li\u003e\n\u003cli\u003ePrecision-machined Big BM output face — correct interface dimensions, no play or misalignment\u003c\/li\u003e\n\u003cli\u003eIdeal for loader rebuilds, retrofits \u0026amp; custom fabrication — no fixed input geometry constraints\u003c\/li\u003e\n\u003cli\u003eBig BM (Volvo BM) interface — buckets, pallet forks, bale spikes, grapples \u0026amp; specialist tools\u003c\/li\u003e\n\u003cli\u003eHigh-strength steel | precision-welded joints — repeated heavy-duty front loader stress cycles\u003c\/li\u003e\n\u003cli\u003e1,160×130×810mm | 80kg — slim profile, minimal bulk, practical front-end load addition\u003c\/li\u003e\n\u003cli\u003eSuited to equipment fabricators, loader rebuilders \u0026amp; agricultural machinery dealers\u003c\/li\u003e\n\u003cli\u003eScandinavian \u0026amp; Northern European Big BM attachment ecosystem compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807143248_005.jpg?v=1786084639\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-BK TO BIG BM\u003c\/td\u003e\n\u003ctd\u003e1160\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e810\u003c\/td\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48514807464181,"sku":"T-BK TO BIG BM","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807143248_001.jpg?v=1786084661"},{"product_id":"landyindus-3-point-hitch-to-skid-steer-quick-attach-adapter-category-1-heavy-duty-conversion-plate","title":"LANDYINDUS 3 Point Hitch to Skid Steer Quick Attach Adapter | Category 1 Heavy Duty Conversion Plate","description":"\u003ch2\u003eLANDYINDUS T-3POINT TO MP1140 3 Point Hitch to Skid Steer Quick Attach Adapter | Category 1 Heavy Duty Conversion Plate\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS T-3POINT TO MP1140\u003c\/strong\u003e is the definitive conversion plate engineered to bridge the gap between your \u003cstrong\u003eCategory 1 tractor's 3-point hitch and the universal skid steer quick attach (MP1140) mount system\u003c\/strong\u003e. For tractor operators who want to dramatically expand their machine's capabilities without investing in additional equipment, this heavy-duty adapter opens up an entirely new world of implement compatibility — from loader buckets and pallet forks to augers, grapples, and tillers — all on a single tractor platform.\u003c\/p\u003e\n\u003ch3\u003eCategory 1 Universal Fit — No Drilling, Welding, or Permanent Modification Required\u003c\/h3\u003e\n\u003cp\u003ePrecision-designed to mate directly with \u003cstrong\u003eall Category 1 tractors equipped with a standard 3-point hitch\u003c\/strong\u003e, this adapter integrates seamlessly with the universal skid steer quick attach (MP1140) system. No drilling, welding, or permanent modification to your tractor is required — simply mount, lock, and work. Whether you operate a compact utility tractor or a mid-size agricultural machine, this adapter delivers a \u003cstrong\u003efactory-quality fit every time\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eZero-Play Precision Engineering — Rigid Connection, Precise Implement Control Across All Terrain\u003c\/h3\u003e\n\u003cp\u003eEvery dimension of this adapter is \u003cstrong\u003emachined to tight tolerances\u003c\/strong\u003e, ensuring a rigid, play-free connection between your tractor's 3-point hitch and the skid steer attachment interface. Eliminating slop and flex in the connection means more precise implement control, reduced wear on both the adapter and your attachments, and a safer, more predictable working experience — across all terrain types and implement configurations.\u003c\/p\u003e\n\u003ch3\u003eRapid Implement Changeover — Bucket, Forks, Grapple in Minutes Without Tools\u003c\/h3\u003e\n\u003cp\u003eSwitch between a loader bucket, pallet forks, or a grapple in \u003cstrong\u003eminutes rather than hours, without tools or assistance\u003c\/strong\u003e. The skid steer quick attach system's speed advantage is now available on your Category 1 tractor — on busy job sites where time is money, the ability to rapidly reconfigure your tractor's implement setup is a genuine competitive advantage that compounds across every working day.\u003c\/p\u003e\n\u003ch3\u003eHigh-Grade Structural Steel | 1,140 × 182 × 540mm | 64kg — Full-Width Cat 1, Compact Depth for Tight Clearances\u003c\/h3\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003ehigh-grade structural steel with a wear-resistant protective coating\u003c\/strong\u003e, the T-3POINT TO MP1140 maintains structural integrity under continuous heavy loading across muddy construction sites and demanding farm operations. At \u003cstrong\u003e64kg with dimensions of 1,140 × 182 × 540mm\u003c\/strong\u003e, it adds minimal mass to your tractor's rear linkage while providing full structural capacity — the compact 182mm depth profile ensures clearance is maintained in tight working environments.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts Cat 1 3-point hitch to universal skid steer MP1140 quick attach — no drilling or welding\u003c\/li\u003e\n\u003cli\u003eCategory 1 universal fit — compact utility tractors \u0026amp; mid-size agricultural machines\u003c\/li\u003e\n\u003cli\u003eZero-play precision engineering — rigid connection, precise control across all terrain types\u003c\/li\u003e\n\u003cli\u003eRapid tool-free implement changeover — bucket, forks, grapple in minutes\u003c\/li\u003e\n\u003cli\u003eHigh-grade structural steel | wear-resistant coating — construction sites \u0026amp; farm operations\u003c\/li\u003e\n\u003cli\u003e1,140×182×540mm | 64kg — full-width Cat 1, compact 182mm depth for tight clearances\u003c\/li\u003e\n\u003cli\u003eFull skid steer ecosystem — buckets, pallet forks, bale spears, augers, rakes, snow blowers \u0026amp; grapples\u003c\/li\u003e\n\u003cli\u003eSuited to single machines \u0026amp; mixed Cat 1 tractor fleets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807155833_006.jpg?v=1786089853\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eDepth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAttachment\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eT-3POINT TO MP1140\u003c\/td\u003e\n\u003ctd\u003e1140\u003c\/td\u003e\n\u003ctd\u003e182\u003c\/td\u003e\n\u003ctd\u003e540\u003c\/td\u003e\n\u003ctd\u003eCat 1\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48515176399093,"sku":"T-3POINT TO MP1140","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260807155833_001.jpg?v=1786089877"}],"url":"https:\/\/www.landyindus.com\/collections\/attachment-adapters.oembed","provider":"landyindus","version":"1.0","type":"link"}