{"title":"Excavator Attachments","description":"\u003cp\u003eShop excavator attachments for digging, grading, demolition, material handling and jobsite cleanup. Find buckets, couplers, thumbs, grapples and other heavy-duty tools for construction and excavation work.\u003c\/p\u003e","products":[{"product_id":"excavator-mechanical-quick-hitch-adapter-s30-to-s40-s40-to-s50-coupler-conversion","title":"Excavator Mechanical Quick Hitch Adapter | S30 to S40 \/ S40 to S50 Coupler Conversion","description":"\u003ch2\u003eExcavator Mechanical Quick Hitch Coupler Adapter – S30 to S40 \/ S40 to S50 Bracket Conversion\u003c\/h2\u003e\n\u003cp\u003eExpand your excavator's attachment compatibility with the \u003cstrong\u003eLANDYINDUS Mechanical Quick Hitch Coupler Adapter\u003c\/strong\u003e. Designed to bridge the dimensional gap between S30, S40, and S50 pin-on bracket standards, this adapter lets you run larger-class attachments on a smaller-class excavator — no new machine, no duplicate attachments required.\u003c\/p\u003e\n\u003cp\u003eIdeal for \u003cstrong\u003econtractors, hire companies, and civil works operators\u003c\/strong\u003e managing mixed excavator fleets who want to maximise return on existing attachment investments.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEliminate Compatibility Barriers:\u003c\/strong\u003e Run S40 or S50-class buckets, hammers, augers, and compaction plates on smaller-bracket excavators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce Capital Expenditure:\u003c\/strong\u003e One adapter serves multiple machines — simplify inventory and improve fleet utilisation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Permanent Modification:\u003c\/strong\u003e Direct pin-on installation using existing bracket pins — no welding or drilling required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Positive-Lock Design:\u003c\/strong\u003e Secure connection with no hydraulic lines, solenoids, or electrical components to fail on site\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Strength Steel Construction:\u003c\/strong\u003e Built to withstand dynamic loads, impact forces, and cyclic stresses in demanding conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-S30 to S40:\u003c\/strong\u003e 656 × 220 × 265 mm | 50 kg — Run S40-class attachments on S30-bracket excavators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-S40 to S50:\u003c\/strong\u003e 763 × 268 × 310 mm | 91 kg — Run S50-class attachments on S40-bracket excavators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSuitable Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCivil construction \u0026amp; bulk earthworks\u003c\/li\u003e\n\u003cli\u003eRoad works \u0026amp; trenching\u003c\/li\u003e\n\u003cli\u003eDemolition \u0026amp; site preparation\u003c\/li\u003e\n\u003cli\u003eQuarrying \u0026amp; mining operations\u003c\/li\u003e\n\u003cli\u003eMixed-fleet attachment standardisation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBracket Standards: S30 \/ S40 \/ S50 pin-on\u003c\/li\u003e\n\u003cli\u003eInstallation: Pin-on, no welding or drilling required\u003c\/li\u003e\n\u003cli\u003eMaterial: High-strength structural steel\u003c\/li\u003e\n\u003cli\u003eME-S30→S40: 656×220×265 mm, 50 kg\u003c\/li\u003e\n\u003cli\u003eME-S40→S50: 763×268×310 mm, 91 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTechnical Drawing:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260618173102_005.jpg?v=1781775145\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eSelect the model that matches your excavator's existing bracket standard. \u003cstrong\u003eContact LANDYINDUS\u003c\/strong\u003e for bracket compatibility advice, volume pricing, or OEM inquiries.\u003c\/p\u003e","brand":"landyindus","offers":[{"title":"Default Title","offer_id":48283423310069,"sku":"ME-S30 TO S40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260618173102_001_d7faa3d9-0691-4f0d-98de-6bef4b4aabdf.jpg?v=1781775225"},{"product_id":"hydraulic-asphalt-cutter-excavator-attachment-400-450mm-s40-s60-quick-hitch-2-14-ton","title":"Hydraulic Asphalt Cutter Excavator Attachment | 400-450mm S40-S60 Quick Hitch 2-14 Ton","description":"\u003ch2\u003eLANDYINDUS Hydraulic Asphalt Cutter Excavator Attachment – 400-450mm S40-S60 Quick Hitch 2-14 Ton\u003c\/h2\u003e\n\u003cp\u003ePrecise, clean, and efficient asphalt and concrete road cutting — powered entirely by your excavator's existing hydraulic circuit. The \u003cstrong\u003eLANDYINDUS Excavator Hydraulic Asphalt Cutter\u003c\/strong\u003e delivers dedicated road saw performance through a direct-mount attachment, controlled from the excavator cab for straighter cuts, less edge breakout, and reduced reinstatement material versus hand-guided alternatives.\u003c\/p\u003e\n\u003cp\u003eAvailable in \u003cstrong\u003e4 bracket configurations: S40, S45, S50, S60\u003c\/strong\u003e — covering excavators from \u003cstrong\u003e2 to 14 tonnes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cab Control:\u003c\/strong\u003e Single operator positions, plunges, and guides the cut using the excavator’s boom and arm geometry — no separate operator, no walk-behind saw required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent Hydraulic Drive:\u003c\/strong\u003e Maintains blade speed and cutting efficiency regardless of asphalt thickness, surface hardness, or aggregate composition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner Cuts, Less Reinstatement:\u003c\/strong\u003e Straighter vertical edges with minimal surface damage — meets road authority surface finish standards on public maintenance contracts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Cutting Disc:\u003c\/strong\u003e Return to full cutting performance at a fraction of full unit replacement cost\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Bracket Standards:\u003c\/strong\u003e S40 \/ S45 \/ S50 \/ S60 — covers the complete range of compact to heavy excavator classes without custom adapters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Steel Construction:\u003c\/strong\u003e Hardened cutting disc flanges and robust hydraulic motor mounts engineered for continuous road cutting vibration, lateral forces, and thermal cycling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable Models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-ASC400-8-S40:\u003c\/strong\u003e Ø400mm | 8mm thick | S40 bracket | 380×238×530mm | 48kg | 2–3.5T — compact excavators, footpaths \u0026amp; driveways\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-ASC450-10-S45:\u003c\/strong\u003e Ø450mm | 10mm thick | S45 bracket | 520×338×600mm | 88kg | 4–6T — urban road surfaces \u0026amp; car parks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-ASC450-10-S50:\u003c\/strong\u003e Ø450mm | 10mm thick | S50 bracket | 520×318×600mm | 90kg | 6–8T — medium-depth urban trench cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-ASC450-10-S60:\u003c\/strong\u003e Ø450mm | 10mm thick | S60 bracket | 600×398×630mm | 110kg | 10–14T — arterial roads, highways \u0026amp; industrial hardstand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnderground utility installation — electrical, telecoms, water, sewer, gas \u0026amp; stormwater\u003c\/li\u003e\n\u003cli\u003eAsphalt road repair \u0026amp; rehabilitation — pothole, crack \u0026amp; structural failure remediation\u003c\/li\u003e\n\u003cli\u003eCivil contractors \u0026amp; road maintenance crews\u003c\/li\u003e\n\u003cli\u003eMunicipal works \u0026amp; principal contractor public road contracts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTechnical Drawing:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260710154354_001.jpg?v=1783669566\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eContact \u003cstrong\u003eLANDYINDUS\u003c\/strong\u003e for hydraulic flow rate requirements, disc replacement options, volume pricing, or compatibility confirmation for your specific excavator make and model.\u003c\/p\u003e","brand":"landyindus","offers":[{"title":"Default Title","offer_id":48395071095029,"sku":"ME-ASC400-8-S40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260710154157_001.jpg?v=1783669687"},{"product_id":"landyindus-excavator-hydraulic-broom-sweeper-attachment-1-2-7m-2-14-ton-road-site-sweeper","title":"LANDYINDUS Excavator Hydraulic Broom Sweeper Attachment 1–2.7m | 2–14 Ton | Road \u0026 Site Sweeper","description":"\u003ch2\u003eSweep Roads. Clear Sites. No Dedicated Sweeper Required.\u003c\/h2\u003e\n\u003cp\u003eThe LANDYINDUS E-PH Excavator Hydraulic Broom Sweeper transforms your existing excavator or backhoe loader into a high-capacity sweeping machine — clearing construction debris, loose aggregate, mud, sand, leaves, and general site waste from road surfaces, hardstand areas, warehouse floors, airport aprons, and any paved or compacted surface. Available in five width configurations from 1,000 mm to 2,700 mm, the E-PH series suits excavators from 2 to 14 tonnes.\u003c\/p\u003e\n\u003ch3\u003eDual-Motor Drive: Consistent Torque Across the Full Sweep Width\u003c\/h3\u003e\n\u003cp\u003eThe E-PH is powered by two independent hydraulic motors driving the broom roller simultaneously. Unlike single-motor alternatives, the dual-motor configuration delivers higher and more consistent rotational torque across the full working width — even under high-resistance conditions such as heavy debris loads, wet material, or compacted surface contamination. The result: a cleaner, more uniform sweep finish in a single pass with fewer repeat passes required.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Support Legs — No Cab Exit Required\u003c\/h3\u003e\n\u003cp\u003eBuilt-in support legs are always deployed and ready for use, allowing the broom to be set down on any surface without tipping. No need to exit the cab to position support stands, and no risk of brush damage during attachment or detachment — reducing setup time on every job.\u003c\/p\u003e\n\u003ch3\u003eRapid Brush Replacement — No Specialist Tools\u003c\/h3\u003e\n\u003cp\u003eBrush elements are designed for fast replacement without specialist tools or extended downtime. On busy sites where sweeping must resume quickly after brush wear, this directly reduces the cost of replacement and the time required to return to operation.\u003c\/p\u003e\n\u003ch3\u003eFive Width Configurations for Every Excavator Class\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-PH100\u003c\/strong\u003e — 1,000 mm | 22 brushes | 190 kg | Suits 2–2.5T compact excavators | Narrow paths, footways, confined areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-PH150\u003c\/strong\u003e — 1,500 mm | 33 brushes | 235 kg | Suits 4–6T excavators | General road and site sweeping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-PH180\u003c\/strong\u003e — 1,800 mm | 40 brushes | 260 kg | Suits 6–8T excavators | General road and site sweeping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-PH220\u003c\/strong\u003e — 2,200 mm | 49 brushes | 290 kg | Suits 10–12T excavators | Wide road surfaces and large hardstand areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-PH270\u003c\/strong\u003e — 2,700 mm | 60 brushes | 330 kg | Suits 12–14T excavators | Airport aprons, port facilities, maximum width per pass\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eRoad construction and maintenance · Civil site preparation and cleanup · Post-demolition debris clearing · Municipal street and footpath sweeping · Warehouse and hardstand floor cleaning · Airport apron maintenance\u003c\/p\u003e\n\u003cp\u003eA bolt-on bracket hitch is available upon request. Contact our team for hydraulic compatibility confirmation, brush specification advice, volume pricing, and lead time information.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTechnical Drawing:\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731160412_005.jpg?v=1785485123\" alt=\"\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eDepth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eBrush Dia. (mm)\u003c\/th\u003e\n\u003cth\u003eBrush Qty.\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-PH100\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003ctd\u003e2–2.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-PH150\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e235\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-PH180\u003c\/td\u003e\n\u003ctd\u003e1800\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e260\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-PH220\u003c\/td\u003e\n\u003ctd\u003e2200\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e49\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e290\u003c\/td\u003e\n\u003ctd\u003e10–12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-PH270\u003c\/td\u003e\n\u003ctd\u003e2700\u003c\/td\u003e\n\u003ctd\u003e1000\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e900\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e12–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494614741237,"sku":"ME-PH100","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731160412_001.jpg?v=1785485139"},{"product_id":"landyindus-excavator-compaction-wheel-drum-style-2-14t-s40-s50-s60-clay-fine-soil","title":"LANDYINDUS Excavator Compaction Wheel Drum Style | 2–14T | S40 S50 S60 | Clay \u0026 Fine Soil","description":"\u003ch2\u003eLANDYINDUS Excavator Drum Compaction Wheel | S40 S50 S60 | 2–14T\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Drum-Style Excavator Compaction Wheel\u003c\/strong\u003e delivers consistent mechanical compaction force through direct drum-to-ground contact, integrating directly onto the excavator arm to apply precise downward pressure while maintaining full machine mobility. Available in four models covering excavator classes from 2T to 14T with S40, S50, and S60 bracket options, this compaction wheel is the preferred choice for trench backfill, pipeline bedding, road sub-base preparation, and embankment consolidation work.\u003c\/p\u003e\n\u003ch3\u003eOptimised for Clay and Fine-Grained Soils\u003c\/h3\u003e\n\u003cp\u003eThe drum compaction wheel is particularly effective in clay-rich and mechanically stable fine-grained soils where vibratory plate compactors and jumping jack rammers struggle to achieve uniform density. By using the excavator's own hydraulic downforce to drive the drum into the soil, the compaction wheel generates consistent compaction across the full drum width with each pass — eliminating the voids and air pockets that lead to settlement, structural failure, and costly rework on civil engineering, utility installation, and infrastructure projects.\u003c\/p\u003e\n\u003ch3\u003eOEM-Compatible Bracket Fitment — S40, S50, S60\u003c\/h3\u003e\n\u003cp\u003eThe series covers S40, S50, and S60 bracket configurations for direct OEM-compatible fitment across leading excavator brands including \u003cstrong\u003eCaterpillar, Komatsu, Sany, and Volvo\u003c\/strong\u003e. All models are precision-manufactured to strict dimensional tolerances and supplied with technical drawings for pre-purchase fitment verification. Custom sizes and bracket configurations are available upon request.\u003c\/p\u003e\n\u003ch3\u003eFour Models — 2T to 14T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CW3T-S40\u003c\/strong\u003e — 840×404×698mm | Drum Ø520mm | S40 bracket | 217 kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CW5T-S40\u003c\/strong\u003e — 840×444×698mm | Drum Ø520mm | S40 bracket | 225 kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CW8T-S50\u003c\/strong\u003e — 910×500×724mm | Drum Ø520mm | S50 bracket | 245 kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CW13T-S60\u003c\/strong\u003e — 1100×620×969mm | Drum Ø716mm | S60 bracket | 425 kg | Suits 10–14T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHeavy-Duty Structural Steel Construction\u003c\/h3\u003e\n\u003cp\u003eEach compaction wheel is constructed from high-strength structural steel with robust bracket welding to withstand the repetitive impact and load cycles inherent in continuous compaction work. Whether you are backfilling utility trenches, consolidating road foundations, or compacting embankment slopes, the LANDYINDUS drum compaction wheel delivers the force, coverage, and machine compatibility needed to achieve specification-grade compaction efficiently.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrum-style compaction wheel for excavators 2T to 14T\u003c\/li\u003e\n\u003cli\u003eS40, S50, S60 OEM-compatible bracket options\u003c\/li\u003e\n\u003cli\u003eOptimised for clay-rich and fine-grained soils\u003c\/li\u003e\n\u003cli\u003eHydraulic downforce-driven — no separate power source required\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel with robust bracket welding\u003c\/li\u003e\n\u003cli\u003eSupplied with technical drawings for fitment verification\u003c\/li\u003e\n\u003cli\u003eCustom sizes and bracket configurations available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731161352_005.jpg?v=1785485663\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (L×W×H) mm\u003c\/th\u003e\n\u003cth\u003eDrum Dia. (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CW3T-S40\u003c\/td\u003e\n\u003ctd\u003e840×404×698\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e217\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CW5T-S40\u003c\/td\u003e\n\u003ctd\u003e840×444×698\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e225\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CW8T-S50\u003c\/td\u003e\n\u003ctd\u003e910×500×724\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003ctd\u003eS50\u003c\/td\u003e\n\u003ctd\u003e245\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CW13T-S60\u003c\/td\u003e\n\u003ctd\u003e1100×620×969\u003c\/td\u003e\n\u003ctd\u003e716\u003c\/td\u003e\n\u003ctd\u003eS60\u003c\/td\u003e\n\u003ctd\u003e425\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494618411253,"sku":"ME-CW3T-S40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731161352_001.jpg?v=1785485720"},{"product_id":"landyindus-excavator-tiltrotator-360-rotation-quick-coupler-1-25t-s30-s40-s50-s60-s70-s80","title":"LANDYINDUS Excavator Tiltrotator 360° Rotation Quick Coupler | 1–25T | S30 S40 S50 S60 S70 S80","description":"\u003ch2\u003eLANDYINDUS Excavator Tiltrotator 360° Rotation Quick Coupler | 1–25T | S30–S80\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Tiltrotator\u003c\/strong\u003e combines 360-degree continuous rotation with a dual-acting hydraulic tilt mechanism to give operators complete freedom of tool positioning — without repositioning the machine. Available across excavator classes from 1T to 25T with bracket options from S30 through S80, this tiltrotator series delivers the power, precision, and durability required for civil engineering, landscaping, utility installation, and demolition applications.\u003c\/p\u003e\n\u003ch3\u003eSolid Cast Steel Gear Housing — Built for Continuous Cyclic Loading\u003c\/h3\u003e\n\u003cp\u003eThe structural foundation of this tiltrotator is its \u003cstrong\u003esolid cast steel gear housing\u003c\/strong\u003e, with both top and bottom sections manufactured from high-grade cast steel for maximum rigidity and impact resistance. Hardened shafts and piston rods are used throughout the tilt and rotation assembly to ensure long-term reliability under continuous cyclic loading. Dual-acting tilt cylinders provide smooth, responsive tilt control in both directions — giving operators the tactile precision needed for fine grading, pipe laying, and confined-space work where tool angle is critical.\u003c\/p\u003e\n\u003ch3\u003e360° Rotation + Hydraulic Tilt — One Attachment, Full Positioning Freedom\u003c\/h3\u003e\n\u003cp\u003eThe 360-degree continuous rotation capability ensures any attachment can be positioned at the optimal angle for the task at hand, regardless of the machine's orientation relative to the work face. Combined with the dual-acting hydraulic tilt, operators achieve complete tool positioning freedom that eliminates the need to reposition the machine — reducing cycle times and improving precision on every pass.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Quick Coupler — Switch Attachments Without Leaving the Cab\u003c\/h3\u003e\n\u003cp\u003eThe integrated quick coupling function allows rapid attachment changes from the cab, dramatically increasing machine versatility and reducing downtime between tasks. Whether paired with a grading bucket, digging bucket, compaction wheel, or hydraulic hammer, the tiltrotator enables a single excavator to perform the work of multiple specialised machines — reducing equipment costs and improving overall job site efficiency.\u003c\/p\u003e\n\u003ch3\u003eOEM-Compatible Brackets — S30 to S80\u003c\/h3\u003e\n\u003cp\u003eBracket options from S30 through S80 provide direct OEM-compatible fitment across leading excavator brands including \u003cstrong\u003eCaterpillar, Komatsu, Volvo, Sany, and Liebherr\u003c\/strong\u003e. All models are precision-manufactured to strict dimensional tolerances and supplied with technical drawings for pre-purchase fitment verification. Custom configurations and bracket adaptations are available upon request.\u003c\/p\u003e\n\u003ch3\u003eSeven Models — 1T to 25T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-X02-S30\u003c\/strong\u003e — Axle Base 230.5mm | 90 kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-X04-S40\u003c\/strong\u003e — Axle Base 300.5mm | 120 kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-X07-S45\u003c\/strong\u003e — Axle Base 430.5mm | 200 kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-X12-S50\u003c\/strong\u003e — Axle Base 430.5mm | 350 kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-X18-S60\u003c\/strong\u003e — Axle Base 480.5mm | 500 kg | Suits 10–14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-X26-S70\u003c\/strong\u003e — Axle Base 600.5mm | 600 kg | Suits 16–18T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-X32-S80\u003c\/strong\u003e — Axle Base 670.5mm | 850 kg | Suits 20–25T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e360° continuous rotation with dual-acting hydraulic tilt\u003c\/li\u003e\n\u003cli\u003eSolid cast steel gear housing — top and bottom\u003c\/li\u003e\n\u003cli\u003eHardened shafts and piston rods for long-term reliability\u003c\/li\u003e\n\u003cli\u003eIntegrated quick coupler — attachment changes from the cab\u003c\/li\u003e\n\u003cli\u003eS30–S80 OEM-compatible bracket options\u003c\/li\u003e\n\u003cli\u003eCompatible with Cat, Komatsu, Volvo, Sany, Liebherr\u003c\/li\u003e\n\u003cli\u003eSupplied with technical drawings for fitment verification\u003c\/li\u003e\n\u003cli\u003eCustom configurations available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731163334_006.jpg?v=1785486853\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAxle Base (A) mm\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-X02-S30\u003c\/td\u003e\n\u003ctd\u003e230.5\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-X04-S40\u003c\/td\u003e\n\u003ctd\u003e300.5\u003c\/td\u003e\n\u003ctd\u003e120\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-X07-S45\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-X12-S50\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-X18-S60\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-X26-S70\u003c\/td\u003e\n\u003ctd\u003e600.5\u003c\/td\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-X32-S80\u003c\/td\u003e\n\u003ctd\u003e670.5\u003c\/td\u003e\n\u003ctd\u003e850\u003c\/td\u003e\n\u003ctd\u003e20–25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494632108277,"sku":"ME-X02-S30","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731163334_001.jpg?v=1785486966"},{"product_id":"landyindus-excavator-flail-mower-attachment-4-8-ton-e-fm-series","title":"LANDYINDUS Excavator Flail Mower Attachment | 4–8 Ton | E-FM Series","description":"\u003ch2\u003eLANDYINDUS E-FM Series Excavator Flail Mower Attachment | 4–8 Ton\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-FM Series Excavator Flail Mower Attachment\u003c\/strong\u003e is a professional-grade hydraulic flail mower designed for 4–8 ton mini excavators, delivering powerful brush cutting and vegetation control in terrain where standard rotary mowers cannot operate. Its lightweight, compact structure allows precise maneuvering in confined spaces, steep slopes, roadside ditches, riverbanks, pond edges, and overgrown firebreak corridors — all from the safety and comfort of the excavator cab.\u003c\/p\u003e\n\u003ch3\u003eOperates Where Rotary Mowers Cannot\u003c\/h3\u003e\n\u003cp\u003eWhether clearing dense undergrowth, maintaining drainage channels, or managing vegetation along embankments and waterways, the E-FM series provides consistent cutting performance across a working width of \u003cstrong\u003e805 mm to 1,220 mm\u003c\/strong\u003e depending on model. The compact frame geometry and excavator arm reach give operators access to slopes, ditches, and confined corridors that are inaccessible to ground-based mowing equipment.\u003c\/p\u003e\n\u003ch3\u003eHardened Flail Blades — 14 to 18 Per Model\u003c\/h3\u003e\n\u003cp\u003eEach unit is fitted with \u003cstrong\u003e14 to 18 hardened flail blades\u003c\/strong\u003e engineered for wear resistance and long service life. The flail blade configuration delivers effective mulching of brush, saplings, and dense vegetation while reducing downtime and replacement costs on demanding continuous-use job sites.\u003c\/p\u003e\n\u003ch3\u003eHigh-Efficiency Hydraulic Drive — 20 MPa \/ 70 LPM\u003c\/h3\u003e\n\u003cp\u003eThe hydraulic drive system operates at \u003cstrong\u003e20 MPa with a flow rate of 70 LPM\u003c\/strong\u003e, ensuring reliable power transfer and smooth operation under continuous load. Compatible with standard excavator auxiliary hydraulic circuits on 4–8 ton machines without additional modification.\u003c\/p\u003e\n\u003ch3\u003eS45 \/ S50 Bracket — Direct Quick Coupler Mounting\u003c\/h3\u003e\n\u003cp\u003eCompatible bracket types \u003cstrong\u003eS45 and S50\u003c\/strong\u003e allow direct mounting to most standard excavator quick couplers without modification, covering the full 4–8 ton excavator class range across leading brands.\u003c\/p\u003e\n\u003ch3\u003eThree Models — 805 mm to 1,220 mm Working Width\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-FM32-S45\u003c\/strong\u003e — 1007×942×930mm | Working Width 805mm | 14 flails | S45 | 321 kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-FM40-S50\u003c\/strong\u003e — 1210×942×960mm | Working Width 1,020mm | 16 flails | S50 | 350 kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-FM48-S50\u003c\/strong\u003e — 1422×942×970mm | Working Width 1,220mm | 18 flails | S50 | 378 kg | Suits 6–8T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional-grade hydraulic flail mower for 4–8 ton excavators\u003c\/li\u003e\n\u003cli\u003eWorking width 805–1,220mm across three models\u003c\/li\u003e\n\u003cli\u003e14–18 hardened flail blades for wear resistance and long service life\u003c\/li\u003e\n\u003cli\u003e20 MPa \/ 70 LPM hydraulic drive — smooth operation under continuous load\u003c\/li\u003e\n\u003cli\u003eS45 \/ S50 bracket — direct quick coupler mounting, no modification required\u003c\/li\u003e\n\u003cli\u003eCompact structure for slopes, ditches, riverbanks, and confined corridors\u003c\/li\u003e\n\u003cli\u003eIdeal for land clearing, utility maintenance, municipal vegetation management, and agriculture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731164014_006.jpg?v=1785487267\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eWorking Width (mm)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eFlail Qty.\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-FM32-S45\u003c\/td\u003e\n\u003ctd\u003e1007×942×930\u003c\/td\u003e\n\u003ctd\u003e805\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003eS45\u003c\/td\u003e\n\u003ctd\u003e321\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-FM40-S50\u003c\/td\u003e\n\u003ctd\u003e1210×942×960\u003c\/td\u003e\n\u003ctd\u003e1020\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003eS50\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-FM48-S50\u003c\/td\u003e\n\u003ctd\u003e1422×942×970\u003c\/td\u003e\n\u003ctd\u003e1220\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003eS50\u003c\/td\u003e\n\u003ctd\u003e378\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494639055093,"sku":"E-FM32-S45","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731164014_001.jpg?v=1785487311"},{"product_id":"landyindus-excavator-grading-beam-with-325mm-compaction-roller-heavy-duty-e-hdlg-series","title":"LANDYINDUS Excavator Grading Beam with 325mm Compaction Roller | Heavy-Duty | E-HDLG Series","description":"\u003ch2\u003eLANDYINDUS E-HDLG Series Heavy-Duty Excavator Grading Beam with 325mm Compaction Roller | 2–18T\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-HDLG Series\u003c\/strong\u003e is a professional-grade land leveling and surface compaction attachment engineered for 2–18 ton excavators, purpose-built for commercial construction, road base preparation, large-scale earthmoving, and heavy-duty site grading applications where standard leveling beams lack the structural rigidity and compaction force required for consistent, high-quality finished surfaces.\u003c\/p\u003e\n\u003ch3\u003e325mm Precision-Machined Compaction Roller — Greater Force Per Pass\u003c\/h3\u003e\n\u003cp\u003eThe precision-machined rear compaction roller features a \u003cstrong\u003e325mm diameter across all models\u003c\/strong\u003e — significantly larger than standard leveling beam rollers — delivering substantially greater compaction force per pass. The result: denser, more stable graded surfaces ready for tarmac laying, block paving, concrete slab preparation, and drainage gradient formation on high-traffic commercial and civil engineering sites.\u003c\/p\u003e\n\u003ch3\u003eHeavy-Duty Structural Steel Frame — No Flex Under High Downforce\u003c\/h3\u003e\n\u003cp\u003eThe rugged heavy-duty structural steel frame is engineered to withstand continuous high-load operation, producing accurate site contours quickly and consistently across gravel, topsoil, sand, aggregate, and compacted fill materials. The deep reinforced frame construction — ranging from \u003cstrong\u003e480mm to 600mm in depth\u003c\/strong\u003e — prevents flexing or deforming under the increased downforce generated by larger excavator arms.\u003c\/p\u003e\n\u003ch3\u003e1,500mm to 3,000mm Working Width — Four Models for Every Site Scale\u003c\/h3\u003e\n\u003cp\u003eAvailable in working widths from \u003cstrong\u003e1,500mm to 3,000mm\u003c\/strong\u003e, the E-HDLG series handles the most demanding grading and compaction tasks across residential driveways, commercial parking lots, road maintenance corridors, utility trench backfill, and large-scale landscaping and earthworks projects.\u003c\/p\u003e\n\u003ch3\u003eS30–S70 Dual Bracket Configurations — 2T to 18T Compatibility\u003c\/h3\u003e\n\u003cp\u003eS30, S40, S50, S60, and S70 \u003cstrong\u003edual bracket configurations\u003c\/strong\u003e provide direct compatibility with standard excavator quick couplers across the full 2–18 ton machine range, allowing fast, tool-free attachment changes on site without custom adapters or additional fabrication work.\u003c\/p\u003e\n\u003ch3\u003eFour Models — 2T to 18T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-HDLG1500-S30\/S40\u003c\/strong\u003e — 1526×1188×480mm | Roller Ø325mm | S30\/S40 | 354 kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-HDLG2000-S40\/S50\u003c\/strong\u003e — 2000×1188×524mm | Roller Ø325mm | S40\/S50 | 438 kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-HDLG2500-S50\/S60\u003c\/strong\u003e — 2500×1188×579mm | Roller Ø325mm | S50\/S60 | 546 kg | Suits 10–14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-HDLG3000-S60\/S70\u003c\/strong\u003e — 3000×1188×600mm | Roller Ø325mm | S60\/S70 | 652 kg | Suits 16–18T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e325mm precision-machined rear compaction roller — all models\u003c\/li\u003e\n\u003cli\u003eWorking widths 1,500mm to 3,000mm across four models\u003c\/li\u003e\n\u003cli\u003eHeavy-duty structural steel frame — no flex under high downforce\u003c\/li\u003e\n\u003cli\u003eDeep reinforced frame 480–600mm depth for maximum rigidity\u003c\/li\u003e\n\u003cli\u003eS30\/S40\/S50\/S60\/S70 dual bracket — direct quick coupler mounting\u003c\/li\u003e\n\u003cli\u003eSuits 2–18T excavators across all leading brands\u003c\/li\u003e\n\u003cli\u003eIdeal for road base, paving prep, trench backfill, and large-scale earthworks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731165044_005.jpg?v=1785487878\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eRoller Dia. (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-HDLG1500-S30\/S40\u003c\/td\u003e\n\u003ctd\u003e1526×1188×480\u003c\/td\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003ctd\u003eS30\/S40\u003c\/td\u003e\n\u003ctd\u003e354\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-HDLG2000-S40\/S50\u003c\/td\u003e\n\u003ctd\u003e2000×1188×524\u003c\/td\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003ctd\u003eS40\/S50\u003c\/td\u003e\n\u003ctd\u003e438\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-HDLG2500-S50\/S60\u003c\/td\u003e\n\u003ctd\u003e2500×1188×579\u003c\/td\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003ctd\u003eS50\/S60\u003c\/td\u003e\n\u003ctd\u003e546\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-HDLG3000-S60\/S70\u003c\/td\u003e\n\u003ctd\u003e3000×1188×600\u003c\/td\u003e\n\u003ctd\u003e325\u003c\/td\u003e\n\u003ctd\u003eS60\/S70\u003c\/td\u003e\n\u003ctd\u003e652\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494642135285,"sku":"ME-HDLG1500-S30\/S40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731165044_001.jpg?v=1785487892"},{"product_id":"landyindus-hydraulic-adjustable-pallet-fork-attachment-for-excavator-1-18-ton","title":"LANDYINDUS Hydraulic Adjustable Pallet Fork Attachment for Excavator | 1–18 Ton","description":"\u003ch2\u003eLANDYINDUS E-TJ Series Hydraulic Adjustable Pallet Fork Attachment for Excavator | 1–18T\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-TJ Series\u003c\/strong\u003e is a professional-grade hydraulic pallet fork frame that allows the operator to adjust fork tine spacing continuously from the excavator cab using the machine's auxiliary hydraulic circuit — eliminating the need to exit the cab, manually reposition tines, or stop work between loads on busy construction sites, agricultural operations, and material handling jobs.\u003c\/p\u003e\n\u003ch3\u003eCab-Controlled Hydraulic Tine Adjustment — No Cab Exit Required\u003c\/h3\u003e\n\u003cp\u003eUnlike standard mechanical pallet fork frames that require manual tine adjustment on the ground, the E-TJ hydraulic system operates at \u003cstrong\u003e16 MPa with a flow rate of 60 LPM\u003c\/strong\u003e to deliver smooth, precise, and infinitely variable tine positioning across the full frame width. Operators switch instantly between narrow pallet configurations and wide load spreads without interrupting workflow or compromising operator safety.\u003c\/p\u003e\n\u003ch3\u003eClass 2A, 3A \u0026amp; 4A — SWL 1,500 kg to 8,000 kg\u003c\/h3\u003e\n\u003cp\u003eAvailable in Class 2A, 3A, and 4A configurations with safe working loads from \u003cstrong\u003e1,500 kg to 8,000 kg\u003c\/strong\u003e and frame widths of 1,200 mm and 1,500 mm, the E-TJ series covers the complete range of excavator material handling requirements — from compact 1–2 ton mini excavators on residential sites through to 16–18 ton machines on large-scale commercial construction, logistics, and civil engineering projects.\u003c\/p\u003e\n\u003ch3\u003eBroad Bracket Compatibility — S30 to S70 \u0026amp; B20\u003c\/h3\u003e\n\u003cp\u003eCompatible with \u003cstrong\u003eS30, S40, S45, S50, S60, S70, and B20\u003c\/strong\u003e bracket types, the E-TJ frame installs directly onto standard excavator quick couplers across all major makes and models without custom adapters. Also available without a bracket with a flat mounting surface for operators who prefer to fit their own existing coupler system for maximum fleet flexibility. Custom widths of 1,500 mm, 1,800 mm, and 2,000 mm are available on request.\u003c\/p\u003e\n\u003ch3\u003eImportant: Fork Tines Ordered Separately\u003c\/h3\u003e\n\u003cp\u003eFork tines are \u003cstrong\u003enot included\u003c\/strong\u003e with the frame and must be ordered separately. Please specify your required tine dimensions (100×40 mm, 125×50 mm, or 150×60 mm depending on Class) and preferred bracket type when placing your order, or contact our team to discuss custom width options.\u003c\/p\u003e\n\u003ch3\u003eEight Models — 1T to 18T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-2A-1200-1.5T-TJ-S30\u003c\/strong\u003e — 1200×367×461mm | SWL 1,500kg | Class 2A | S30 | 75kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-2A-1200-2.5T-TJ-S40\u003c\/strong\u003e — 1200×489×474mm | SWL 2,500kg | Class 2A | S40 | 104kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-2A-1200-2.5T-TJ-S45\u003c\/strong\u003e — 1200×616×487mm | SWL 2,500kg | Class 2A | S45 | 126kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-2A-1200-2.5T-TJ-S50\u003c\/strong\u003e — 1200×616×487mm | SWL 2,500kg | Class 2A | S50 | 149kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-3A-1200-5T-TJ-S60\u003c\/strong\u003e — 1200×719×614mm | SWL 5,000kg | Class 3A | S60 | 205kg | Suits 10–14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-3A-1200-6T-TJ-S70\u003c\/strong\u003e — 1200×861×657mm | SWL 6,000kg | Class 3A | S70 | 298kg | Suits 16–18T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-3A-1500-6T-TJ-S70\u003c\/strong\u003e — 1500×861×657mm | SWL 6,000kg | Class 3A | S70 | 279kg | Suits 16–18T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-4A-1500-8T-TJ-B20\u003c\/strong\u003e — 1500×1053×837mm | SWL 8,000kg | Class 4A | B20 | 302kg | Suits 10–14T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydraulic cab-controlled tine adjustment — no cab exit required\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 60 LPM — smooth, infinitely variable tine positioning\u003c\/li\u003e\n\u003cli\u003eClass 2A, 3A, 4A — SWL 1,500 kg to 8,000 kg\u003c\/li\u003e\n\u003cli\u003eFrame widths 1,200 mm and 1,500 mm standard; 1,500\/1,800\/2,000 mm on request\u003c\/li\u003e\n\u003cli\u003eS30, S40, S45, S50, S60, S70, B20 bracket options\u003c\/li\u003e\n\u003cli\u003eAvailable without bracket — flat surface for own coupler fitment\u003c\/li\u003e\n\u003cli\u003eBlack paint finish; suits all major excavator brands\u003c\/li\u003e\n\u003cli\u003eFork tines ordered separately — 100×40 \/ 125×50 \/ 150×60 mm options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731165845_006.jpg?v=1785488389\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eClass\u003c\/th\u003e\n\u003cth\u003eSWL (kg)\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eFork (mm)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-2A-1200-1.5T-TJ-S30\u003c\/td\u003e\n\u003ctd\u003e2A\u003c\/td\u003e\n\u003ctd\u003e1,500\u003c\/td\u003e\n\u003ctd\u003e1200×367×461\u003c\/td\u003e\n\u003ctd\u003e100×40\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS30\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-2A-1200-2.5T-TJ-S40\u003c\/td\u003e\n\u003ctd\u003e2A\u003c\/td\u003e\n\u003ctd\u003e2,500\u003c\/td\u003e\n\u003ctd\u003e1200×489×474\u003c\/td\u003e\n\u003ctd\u003e100×40\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e104\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-2A-1200-2.5T-TJ-S45\u003c\/td\u003e\n\u003ctd\u003e2A\u003c\/td\u003e\n\u003ctd\u003e2,500\u003c\/td\u003e\n\u003ctd\u003e1200×616×487\u003c\/td\u003e\n\u003ctd\u003e100×40\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS45\u003c\/td\u003e\n\u003ctd\u003e126\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-2A-1200-2.5T-TJ-S50\u003c\/td\u003e\n\u003ctd\u003e2A\u003c\/td\u003e\n\u003ctd\u003e2,500\u003c\/td\u003e\n\u003ctd\u003e1200×616×487\u003c\/td\u003e\n\u003ctd\u003e100×40\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS50\u003c\/td\u003e\n\u003ctd\u003e149\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-3A-1200-5T-TJ-S60\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003ctd\u003e5,000\u003c\/td\u003e\n\u003ctd\u003e1200×719×614\u003c\/td\u003e\n\u003ctd\u003e125×50\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS60\u003c\/td\u003e\n\u003ctd\u003e205\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-3A-1200-6T-TJ-S70\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003ctd\u003e6,000\u003c\/td\u003e\n\u003ctd\u003e1200×861×657\u003c\/td\u003e\n\u003ctd\u003e125×50\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS70\u003c\/td\u003e\n\u003ctd\u003e298\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-3A-1500-6T-TJ-S70\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003ctd\u003e6,000\u003c\/td\u003e\n\u003ctd\u003e1500×861×657\u003c\/td\u003e\n\u003ctd\u003e125×50\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS70\u003c\/td\u003e\n\u003ctd\u003e279\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-4A-1500-8T-TJ-B20\u003c\/td\u003e\n\u003ctd\u003e4A\u003c\/td\u003e\n\u003ctd\u003e8,000\u003c\/td\u003e\n\u003ctd\u003e1500×1053×837\u003c\/td\u003e\n\u003ctd\u003e150×60\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eB20\u003c\/td\u003e\n\u003ctd\u003e302\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494652358901,"sku":"ME-2A-1200-1.5T-TJ-S30","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731165845_001.jpg?v=1785488407"},{"product_id":"landyindus-hydraulic-excavator-sorting-grapple-timber-stone-grab-attachment-2-6t","title":"LANDYINDUS Hydraulic Excavator Sorting Grapple | Timber \u0026 Stone Grab Attachment | 2–6T","description":"\u003ch2\u003eLANDYINDUS E-SG12 Hydraulic Excavator Sorting Grapple | Timber \u0026amp; Stone Grab | 2–6T\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-SG12 Hydraulic Excavator Sorting Grapple\u003c\/strong\u003e is a versatile multi-function grab engineered for 2–6 ton mini and compact excavators, combining powerful hydraulic gripping force with a wide opening range of up to \u003cstrong\u003e1,615 mm\u003c\/strong\u003e to handle timber sorting, stone screening, construction debris separation, and light demolition clearing tasks that require a strong, precise, and controllable grab attachment on forestry, construction, and recycling job sites.\u003c\/p\u003e\n\u003ch3\u003e1,615mm Opening Range — From Single Logs to Bulk Demolition Debris\u003c\/h3\u003e\n\u003cp\u003eOperating at \u003cstrong\u003e16 MPa with a hydraulic flow rate of 60 LPM\u003c\/strong\u003e, the E-SG12 delivers consistent gripping force across the full opening range — from fully closed for securing individual logs, pipes, and structural members through to the maximum 1,615 mm spread for capturing large timber bundles, oversized stone blocks, and bulky demolition debris in a single controlled grab cycle without repositioning or multiple attempts.\u003c\/p\u003e\n\u003ch3\u003eMulti-Tine Claw Design — Effective Across Irregular Shapes\u003c\/h3\u003e\n\u003cp\u003eThe multi-tine claw design provides excellent load retention across irregular shapes including round logs, angular stone, mixed demolition rubble, and bundled timber offcuts. The E-SG12 is equally effective for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLog loading and unloading at forestry processing sites\u003c\/li\u003e\n\u003cli\u003eStone and aggregate sorting on quarry and construction sites\u003c\/li\u003e\n\u003cli\u003eScrap metal and waste material separation at recycling facilities\u003c\/li\u003e\n\u003cli\u003eLight structural demolition debris clearance on urban redevelopment projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eS40 \u0026amp; S45 Bracket — Direct Quick Coupler Mounting\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eS40 and S45 bracket configurations\u003c\/strong\u003e ensure direct compatibility with standard excavator quick couplers across all major 2–6 ton mini excavator makes and models, allowing fast, tool-free attachment changes on site without custom adapters — enabling operators to switch between the sorting grapple and other attachments as job site tasks change throughout the working day.\u003c\/p\u003e\n\u003ch3\u003eHigh-Strength Structural Steel — Built for Continuous Heavy-Cycle Operation\u003c\/h3\u003e\n\u003cp\u003eWeighing 417–432 kg depending on bracket configuration and built from \u003cstrong\u003ehigh-strength structural steel\u003c\/strong\u003e, the E-SG12 is engineered for continuous heavy-cycle operation in demanding forestry, construction, and demolition environments where reliable gripping performance, structural durability, and broad material compatibility are essential for productive daily operation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHydraulic sorting grapple for 2–6 ton mini excavators\u003c\/li\u003e\n\u003cli\u003eOpening range 0–1,615 mm — single logs to bulk debris in one grab\u003c\/li\u003e\n\u003cli\u003eMulti-tine claw design for irregular shapes: logs, stone, rubble, scrap\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 60 LPM hydraulic drive — consistent gripping force\u003c\/li\u003e\n\u003cli\u003eS40 \u0026amp; S45 bracket — direct quick coupler mounting, no adapters required\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel — continuous heavy-cycle durability\u003c\/li\u003e\n\u003cli\u003eSuits forestry, construction, demolition, quarry, and recycling applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731170138_006.jpg?v=1785488679\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eOpening Range (mm)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-SG12-S40\u003c\/td\u003e\n\u003ctd\u003e1010×715×960\u003c\/td\u003e\n\u003ctd\u003e0–1,615\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e417\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-SG12-S45\u003c\/td\u003e\n\u003ctd\u003e1010×715×990\u003c\/td\u003e\n\u003ctd\u003e430–1,615\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS45\u003c\/td\u003e\n\u003ctd\u003e432\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494654882037,"sku":"E-SG12-S45","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731170138_001.jpg?v=1785488699"},{"product_id":"landyindus-excavator-push-broom-sweeper-attachment-grain-gravel-debris-cleaning","title":"LANDYINDUS Excavator Push Broom Sweeper Attachment | Grain Gravel \u0026 Debris Cleaning","description":"\u003ch2\u003eLANDYINDUS E-EA-SW Series Excavator Push Broom Sweeper Attachment | Grain, Gravel \u0026amp; Debris Cleaning\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-EA-SW Series Excavator Push Broom Sweeper\u003c\/strong\u003e is a versatile static-bristle surface cleaning attachment engineered for mini and mid-size excavators, designed to sweep, collect, and move a wide range of loose materials — including grain, sand, gravel, rocks, construction debris, plastic shrink wrap, welding wire, and mixed waste — across road surfaces, construction sites, farm floors, mining yards, and industrial facilities in a single efficient pass.\u003c\/p\u003e\n\u003ch3\u003eHandles What Rotary Sweepers Cannot — Plastic Film, Wire \u0026amp; Fibrous Debris\u003c\/h3\u003e\n\u003cp\u003eUnlike rotary drum sweepers that struggle with flexible or stringy materials, the E-EA-SW \u003cstrong\u003estatic push broom design\u003c\/strong\u003e handles plastic film, wire, rope, and fibrous debris that would wrap around and jam a rotating brush mechanism. This makes it the preferred pre-sweep attachment for clearing large debris before deploying a machine sweeper, and the only practical excavator sweeping solution for grain handling facilities, recycling yards, and industrial sites where flexible waste materials are present.\u003c\/p\u003e\n\u003ch3\u003e1,200mm to 2,400mm Bristle Length — 6, 9 \u0026amp; 12 Row Configurations\u003c\/h3\u003e\n\u003cp\u003eAvailable in bristle lengths from \u003cstrong\u003e1,200 mm to 2,400 mm\u003c\/strong\u003e with bristle row configurations of 6, 9, and 12 rows providing increasing sweeping density and material retention capacity. The series scales from compact \u003cstrong\u003e64 kg units\u003c\/strong\u003e for mini excavators on residential and light commercial sites through to \u003cstrong\u003e233 kg wide-coverage models\u003c\/strong\u003e for large-scale road maintenance, mining site cleanup, and agricultural grain floor sweeping operations.\u003c\/p\u003e\n\u003ch3\u003eS30, S40, S45, S50, S60 \u0026amp; B20 Bracket — Broad Machine Compatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with \u003cstrong\u003eS30, S40, S45, S50, S60, and B20\u003c\/strong\u003e bracket types, the E-EA-SW installs directly onto standard excavator quick couplers across all major makes and models without custom adapters — allowing fast attachment changes on site and enabling operators to switch between the sweeper and other excavator attachments as cleaning and earthmoving tasks alternate throughout the working day.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFarming \u0026amp; agriculture grain floor sweeping\u003c\/li\u003e\n\u003cli\u003eConstruction site debris pre-sweeping\u003c\/li\u003e\n\u003cli\u003eWaste management facility floor cleaning\u003c\/li\u003e\n\u003cli\u003eMining and quarry yard maintenance\u003c\/li\u003e\n\u003cli\u003eMunicipal road surface cleaning\u003c\/li\u003e\n\u003cli\u003eRecycling yards with flexible waste materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStatic push broom — handles plastic film, wire \u0026amp; fibrous debris rotary sweepers cannot\u003c\/li\u003e\n\u003cli\u003eBristle lengths 1,200–2,400mm | 6, 9 \u0026amp; 12 row configurations\u003c\/li\u003e\n\u003cli\u003eEight models from 64 kg to 233 kg for mini to mid-size excavators\u003c\/li\u003e\n\u003cli\u003eS30, S40, S45, S50, S60 \u0026amp; B20 bracket options — no custom adapters required\u003c\/li\u003e\n\u003cli\u003eLow maintenance — no rotating mechanism to jam or service\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to dedicated mechanical sweepers\u003c\/li\u003e\n\u003cli\u003eSuits construction, agriculture, mining, recycling \u0026amp; municipal applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731170641_006.jpg?v=1785488968\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (L×W×H) mm\u003c\/th\u003e\n\u003cth\u003eBristle Length (mm)\u003c\/th\u003e\n\u003cth\u003eBristle Height (mm)\u003c\/th\u003e\n\u003cth\u003eBristle Rows\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-EA-SW12-6\u003c\/td\u003e\n\u003ctd\u003e1230×345×365\u003c\/td\u003e\n\u003ctd\u003e1200\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS30 \/ S40\u003c\/td\u003e\n\u003ctd\u003e64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-EA-SW18-6\u003c\/td\u003e\n\u003ctd\u003e1820×345×365\u003c\/td\u003e\n\u003ctd\u003e1800\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-EA-SW15-9\u003c\/td\u003e\n\u003ctd\u003e1520×485×365\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-EA-SW18-6\u003c\/td\u003e\n\u003ctd\u003e1820×345×365\u003c\/td\u003e\n\u003ctd\u003e1800\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS45\u003c\/td\u003e\n\u003ctd\u003e93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-EA-SW15-9\u003c\/td\u003e\n\u003ctd\u003e1520×485×365\u003c\/td\u003e\n\u003ctd\u003e1500\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eS45 \/ S50\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-EA-SW18-9\u003c\/td\u003e\n\u003ctd\u003e1820×485×365\u003c\/td\u003e\n\u003ctd\u003e1800\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eS45 \/ S50 \/ S60\u003c\/td\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-EA-SW18-12\u003c\/td\u003e\n\u003ctd\u003e1820×635×365\u003c\/td\u003e\n\u003ctd\u003e1800\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eS45 \/ S50 \/ S60 \/ B20\u003c\/td\u003e\n\u003ctd\u003e178\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-EA-SW24-12\u003c\/td\u003e\n\u003ctd\u003e2420×635×365\u003c\/td\u003e\n\u003ctd\u003e2400\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eS45 \/ S50 \/ S60 \/ B20\u003c\/td\u003e\n\u003ctd\u003e233\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494677950709,"sku":"ME-EA-SW12-6","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731170641_001.jpg?v=1785488982"},{"product_id":"landyindus-hydraulic-five-finger-grapple-for-excavator-1-8-ton-timber-grab-attachment","title":"LANDYINDUS Hydraulic Five Finger Grapple for Excavator | 1–8 Ton | Timber Grab Attachment","description":"\u003ch2\u003eLANDYINDUS E-DG Series Hydraulic Five Finger Grapple for Excavator | 1–8 Ton | Timber \u0026amp; Demolition Grab\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-DG Series Hydraulic Five Finger Grapple\u003c\/strong\u003e is a versatile, high-capacity excavator attachment built for operators who work across a constantly changing variety of materials and jobsite conditions. With six size configurations covering excavators from 1 to 8 tons and safe working loads from \u003cstrong\u003e800 kg to 8,000 kg\u003c\/strong\u003e, the E-DG series delivers the reach, grip area, and clamping force needed to handle everything from small timber bundles to large demolition debris — all within a single, purpose-engineered attachment platform.\u003c\/p\u003e\n\u003ch3\u003eFive-Finger Design — Up to 1,945mm Opening, 0.12–0.42m² Grip Area\u003c\/h3\u003e\n\u003cp\u003eThe wide-spread five-finger configuration allows the grapple to open to a maximum of \u003cstrong\u003e1,945 mm\u003c\/strong\u003e, enabling operators to scoop up large volumes of loose material, timber, brush, or mixed debris in a single pass. At the same time, the fingers close tightly enough to handle smaller, irregular items with precision — giving operators the flexibility to switch between bulk material handling and detailed sorting without changing attachments or losing productivity. Grip area ranges from \u003cstrong\u003e0.12 m² to 0.42 m²\u003c\/strong\u003e depending on model, ensuring maximum material capture per cycle.\u003c\/p\u003e\n\u003ch3\u003eMulti-Application Performance — Timber, Demolition \u0026amp; Land Clearing\u003c\/h3\u003e\n\u003cp\u003eThe E-DG five finger grapple excels across multiple demanding applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber \u0026amp; forestry\u003c\/strong\u003e — grabs, lifts, and loads logs, branches, and root balls efficiently\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolition \u0026amp; construction\u003c\/strong\u003e — sorts concrete rubble, rebar, mixed waste, and salvage material\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLand clearing\u003c\/strong\u003e — wide grip area captures maximum brush and debris per cycle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecycling yards \u0026amp; scrap handling\u003c\/strong\u003e — reduces passes and cuts overall cycle times significantly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 MPa \/ 60 LPM — Seamless Integration with Standard Hydraulic Systems\u003c\/h3\u003e\n\u003cp\u003eAll E-DG models operate at \u003cstrong\u003e16 MPa with a hydraulic flow requirement of 60 LPM\u003c\/strong\u003e, ensuring smooth, responsive performance that integrates seamlessly with standard excavator hydraulic systems. No additional hydraulic modifications required.\u003c\/p\u003e\n\u003ch3\u003eS30, S40, S50 \u0026amp; S60 Bracket Compatibility\u003c\/h3\u003e\n\u003cp\u003eBracket compatibility spans \u003cstrong\u003eS30, S40, S50, and S60\u003c\/strong\u003e coupler standards across the model range, covering the most common quick-coupler configurations used on mini and mid-size excavators worldwide. Match your excavator tonnage to the appropriate E-DG configuration and verify your coupler standard before ordering.\u003c\/p\u003e\n\u003ch3\u003eSix Models — 1T to 8T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-DG12\u003c\/strong\u003e — 621×305×328mm | SWL 800kg | OR 40–690mm | 0.12m² | S30\/S40 | 71kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-DG16\u003c\/strong\u003e — 635×394×353mm | SWL 1,000kg | OR 40–935mm | 0.16m² | S30\/S40 | 97kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-DG22\u003c\/strong\u003e — 828×440×466mm | SWL 3,000kg | OR 40–1,255mm | 0.20m² | S40 | 189kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-DG25\u003c\/strong\u003e — 830×500×553mm | SWL 3,000kg | OR 40–1,475mm | 0.25m² | S40 | 233kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-DG35\u003c\/strong\u003e — 1044×638×582mm | SWL 7,000kg | OR 40–1,860mm | 0.35m² | S50\/S60 | 410kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-DG42\u003c\/strong\u003e — 1144×645×675mm | SWL 8,000kg | OR 40–1,945mm | 0.42m² | S50\/S60 | 530kg | Suits 6–8T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFive-finger design — up to 1,945mm opening, superior to 2- or 4-tine alternatives\u003c\/li\u003e\n\u003cli\u003eSWL 800kg to 8,000kg across six models\u003c\/li\u003e\n\u003cli\u003eGrip area 0.12–0.42m² — maximum material capture per cycle\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 60 LPM — standard excavator hydraulic circuit compatible\u003c\/li\u003e\n\u003cli\u003eS30, S40, S50, S60 bracket options\u003c\/li\u003e\n\u003cli\u003eHigh-strength alloy steel construction throughout\u003c\/li\u003e\n\u003cli\u003eRobust hydraulic cylinder and finger pivot — consistent clamping across thousands of cycles\u003c\/li\u003e\n\u003cli\u003eSuits timber, demolition, land clearing, and recycling applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731171118_006.jpg?v=1785489254\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSWL (kg)\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eOpening Range (mm)\u003c\/th\u003e\n\u003cth\u003eGrip Area (m²)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-DG12\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003e621×305×328\u003c\/td\u003e\n\u003ctd\u003e40–690\u003c\/td\u003e\n\u003ctd\u003e0.12\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS30 \/ S40\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-DG16\u003c\/td\u003e\n\u003ctd\u003e1,000\u003c\/td\u003e\n\u003ctd\u003e635×394×353\u003c\/td\u003e\n\u003ctd\u003e40–935\u003c\/td\u003e\n\u003ctd\u003e0.16\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS30 \/ S40\u003c\/td\u003e\n\u003ctd\u003e97\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-DG22\u003c\/td\u003e\n\u003ctd\u003e3,000\u003c\/td\u003e\n\u003ctd\u003e828×440×466\u003c\/td\u003e\n\u003ctd\u003e40–1,255\u003c\/td\u003e\n\u003ctd\u003e0.20\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e189\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-DG25\u003c\/td\u003e\n\u003ctd\u003e3,000\u003c\/td\u003e\n\u003ctd\u003e830×500×553\u003c\/td\u003e\n\u003ctd\u003e40–1,475\u003c\/td\u003e\n\u003ctd\u003e0.25\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e233\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-DG35\u003c\/td\u003e\n\u003ctd\u003e7,000\u003c\/td\u003e\n\u003ctd\u003e1044×638×582\u003c\/td\u003e\n\u003ctd\u003e40–1,860\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS50 \/ S60\u003c\/td\u003e\n\u003ctd\u003e410\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-DG42\u003c\/td\u003e\n\u003ctd\u003e8,000\u003c\/td\u003e\n\u003ctd\u003e1144×645×675\u003c\/td\u003e\n\u003ctd\u003e40–1,945\u003c\/td\u003e\n\u003ctd\u003e0.42\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS50 \/ S60\u003c\/td\u003e\n\u003ctd\u003e530\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494718845173,"sku":"ME-DG12","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731171118_001.jpg?v=1785489271"},{"product_id":"landyindus-hydraulic-forestry-timber-grapple-for-excavator-2-8-ton-reinforced-heavy-duty-log-grab","title":"LANDYINDUS Hydraulic Forestry Timber Grapple for Excavator | 2–8 Ton | Reinforced Heavy-Duty Log Grab","description":"\u003ch2\u003eLANDYINDUS E-TG Series Hydraulic Forestry Timber Grapple for Excavator | 2–8 Ton | Reinforced Heavy-Duty Log Grab\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-TG Series Hydraulic Forestry Timber Grapple\u003c\/strong\u003e is the purpose-built excavator attachment for operators who specialize in round timber handling, log loading, and light forestry sorting tasks. Engineered specifically for the demands of forestry and timber work, the E-TG series combines a high-capacity hydraulic clamping system with a reinforced steel frame designed to withstand the repeated impact, abrasion, and stress loads that define professional logging and land-clearing operations. With four size configurations covering excavators from 2 to 8 tons, there is a LANDYINDUS timber grapple matched to your machine and your workload.\u003c\/p\u003e\n\u003ch3\u003eCurved Tine Design — Optimised for Round Timber \u0026amp; Log Handling\u003c\/h3\u003e\n\u003cp\u003eThe curved tine design of the E-TG series conforms naturally to the shape of logs, poles, and root balls to maximize contact area and grip security during lifting, loading, and transport. Whether loading a timber truck, sorting logs by diameter at a processing yard, clearing felled trees from a harvest site, or handling large root balls during land clearing, the E-TG delivers the controlled, secure grip that prevents load shift and keeps every lift safe and efficient.\u003c\/p\u003e\n\u003ch3\u003eSWL 5,000–7,000 kg | Opening Range 95–2,065mm\u003c\/h3\u003e\n\u003cp\u003eSafe working loads span from \u003cstrong\u003e5,000 kg\u003c\/strong\u003e on the ME-TG22S and ME-TG28S models up to \u003cstrong\u003e7,000 kg\u003c\/strong\u003e on the E-TG42S — providing the lifting capacity needed for heavy round timber and large-diameter logs without compromising structural integrity under sustained use. Opening ranges extend from \u003cstrong\u003e95 mm\u003c\/strong\u003e on the smallest model up to \u003cstrong\u003e2,065 mm\u003c\/strong\u003e on the largest, giving operators the flexibility to handle everything from small-diameter poles and branches to full-size sawlogs and large timber bundles within a single attachment platform.\u003c\/p\u003e\n\u003ch3\u003eReinforced Construction — Built for Continuous Forestry Conditions\u003c\/h3\u003e\n\u003cp\u003eKey stress points including the \u003cstrong\u003etine pivot joints, hydraulic cylinder mounts, and frame weld zones\u003c\/strong\u003e are engineered with additional material thickness and structural reinforcement to extend service life in the demanding conditions of continuous forestry work. The high-strength alloy steel construction resists wear, impact, and corrosion through thousands of operating cycles with minimal maintenance requirements.\u003c\/p\u003e\n\u003ch3\u003eS30, S40, S45 \u0026amp; S50 Bracket — 2T to 8T Excavator Compatibility\u003c\/h3\u003e\n\u003cp\u003eAll models operate at \u003cstrong\u003e16 MPa with a hydraulic flow requirement of 60 LPM\u003c\/strong\u003e, and bracket compatibility spans \u003cstrong\u003eS30, S40, S45, and S50\u003c\/strong\u003e coupler standards — covering the most common quick-coupler configurations used on mid-size and large excavators in forestry applications worldwide.\u003c\/p\u003e\n\u003ch3\u003eFour Models — 2T to 8T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-TG22S\u003c\/strong\u003e — 794×362×490mm | SWL 5,000kg | OR 95–1,320mm | 0.20m² | S30\/S40 | 123kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-TG28S\u003c\/strong\u003e — 872×539×562mm | SWL 5,000kg | OR 100–1,500mm | 0.28m² | S40 | 262kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-TG35S\u003c\/strong\u003e — 995×554×673mm | SWL 5,000kg | OR 140–1,855mm | 0.35m² | S40\/S45\/S50 | 321kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-TG42S\u003c\/strong\u003e — 1138×560×677mm | SWL 7,000kg | OR 140–2,065mm | 0.42m² | S40\/S45\/S50 | 417kg | Suits 6–8T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built for round timber, log loading \u0026amp; forestry sorting\u003c\/li\u003e\n\u003cli\u003eCurved tine design — maximises contact area on logs, poles \u0026amp; root balls\u003c\/li\u003e\n\u003cli\u003eSWL 5,000–7,000 kg | Opening range 95–2,065mm across four models\u003c\/li\u003e\n\u003cli\u003eReinforced tine pivots, cylinder mounts \u0026amp; weld zones for extended service life\u003c\/li\u003e\n\u003cli\u003eHigh-strength alloy steel — wear, impact \u0026amp; corrosion resistant\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 60 LPM — standard excavator hydraulic circuit compatible\u003c\/li\u003e\n\u003cli\u003eS30, S40, S45, S50 bracket options — suits 2–8T excavators\u003c\/li\u003e\n\u003cli\u003eCompatible with a variety of attachments and tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731171735_005.jpg?v=1785489613\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSWL (kg)\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eOpening Range (mm)\u003c\/th\u003e\n\u003cth\u003eGrip Area (m²)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-TG22S\u003c\/td\u003e\n\u003ctd\u003e5,000\u003c\/td\u003e\n\u003ctd\u003e794×362×490\u003c\/td\u003e\n\u003ctd\u003e95–1,320\u003c\/td\u003e\n\u003ctd\u003e0.20\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS30 \/ S40\u003c\/td\u003e\n\u003ctd\u003e123\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-TG28S\u003c\/td\u003e\n\u003ctd\u003e5,000\u003c\/td\u003e\n\u003ctd\u003e872×539×562\u003c\/td\u003e\n\u003ctd\u003e100–1,500\u003c\/td\u003e\n\u003ctd\u003e0.28\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-TG35S\u003c\/td\u003e\n\u003ctd\u003e5,000\u003c\/td\u003e\n\u003ctd\u003e995×554×673\u003c\/td\u003e\n\u003ctd\u003e140–1,855\u003c\/td\u003e\n\u003ctd\u003e0.35\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40 \/ S45 \/ S50\u003c\/td\u003e\n\u003ctd\u003e321\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-TG42S\u003c\/td\u003e\n\u003ctd\u003e7,000\u003c\/td\u003e\n\u003ctd\u003e1138×560×677\u003c\/td\u003e\n\u003ctd\u003e140–2,065\u003c\/td\u003e\n\u003ctd\u003e0.42\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS40 \/ S45 \/ S50\u003c\/td\u003e\n\u003ctd\u003e417\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494723465461,"sku":"ME-TG22S","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731171735_001.jpg?v=1785489630"},{"product_id":"landyindus-hydraulic-tree-shear-for-excavator-dual-cylinder-replaceable-blade-25cm-cut-2-6-ton","title":"LANDYINDUS Hydraulic Tree Shear for Excavator | Dual Cylinder Replaceable Blade | 25cm Cut | 2–6 Ton","description":"\u003ch2\u003eLANDYINDUS E-TS Series Hydraulic Tree Shear for Excavator | Dual Cylinder | Replaceable Blade | 25cm Cut | 2–6 Ton\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-TS Series Hydraulic Tree Shear\u003c\/strong\u003e is the purpose-built excavator tool for land-clearing contractors, forestry operators, and agricultural developers who need to fell, cut, and clear trees and brush quickly, safely, and efficiently from the cab of their machine. Powered by two high-force hydraulic cylinders working in tandem, the E-TS series delivers the fast, powerful cutting action needed to fell timber up to \u003cstrong\u003e25 cm in diameter\u003c\/strong\u003e — covering the vast majority of trees encountered in land-clearing, right-of-way maintenance, orchard removal, and light forestry applications.\u003c\/p\u003e\n\u003ch3\u003eDual-Cylinder Drive — Greater Closing Force, Faster Cycle Times\u003c\/h3\u003e\n\u003cp\u003eWith two cylinders driving the cutting jaw simultaneously, the E-TS generates significantly greater closing force and faster cycle times than single-cylinder alternatives — cutting through hardwood and softwood species up to 25 cm thick in a single, clean motion without stalling or requiring multiple passes. Faster cuts mean \u003cstrong\u003emore trees cleared per hour\u003c\/strong\u003e, lower fuel consumption per cycle, and reduced operator fatigue across a full working shift.\u003c\/p\u003e\n\u003ch3\u003eReplaceable High Wear-Resistant Steel Blade — Field Serviceable\u003c\/h3\u003e\n\u003cp\u003eThe specially designed \u003cstrong\u003ereplaceable cutting blade\u003c\/strong\u003e is manufactured from high wear-resistant steel to maintain a sharp, effective cutting edge through thousands of cutting cycles. When the blade reaches the end of its service life, it can be replaced quickly and cost-effectively in the field — without returning the attachment for workshop servicing or investing in an entirely new shear unit. This replaceability significantly reduces long-term cost of ownership and keeps the attachment performing at full efficiency throughout its operational life.\u003c\/p\u003e\n\u003ch3\u003eTwo Models — 2T to 6T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-TS180\u003c\/strong\u003e — 803×632×1132mm | Opening 170–660mm | S30\/S40 | 190kg | Suits 2–3.5T | Ideal for brush clearing, sapling removal \u0026amp; light timber felling on compact machines\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-TS250\u003c\/strong\u003e — 833×632×1132mm | Opening 240–890mm | S45\/S50\/S60 | 350kg | Suits 4–6T | Additional reach and cutting force for larger-diameter timber and heavier land-clearing workloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e16 MPa \/ 60 LPM — S30, S40, S45, S50 \u0026amp; S60 Bracket Compatibility\u003c\/h3\u003e\n\u003cp\u003eBoth models operate at \u003cstrong\u003e16 MPa with a hydraulic flow requirement of 60 LPM\u003c\/strong\u003e, integrating seamlessly with standard excavator auxiliary hydraulic circuits. Compatible with \u003cstrong\u003eS30, S40, S45, S50, and S60\u003c\/strong\u003e quick-coupler standards — no custom adapters required.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual hydraulic cylinders — greater closing force \u0026amp; faster cycle times than single-cylinder shears\u003c\/li\u003e\n\u003cli\u003eCuts timber up to 25cm diameter in a single clean motion\u003c\/li\u003e\n\u003cli\u003eReplaceable high wear-resistant steel blade — field serviceable, no workshop required\u003c\/li\u003e\n\u003cli\u003eTwo models: ME-TS180 (2–3.5T) \u0026amp; E-TS250 (4–6T)\u003c\/li\u003e\n\u003cli\u003eOpening range 170–660mm (ME-TS180) and 240–890mm (E-TS250)\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 60 LPM — standard excavator hydraulic circuit compatible\u003c\/li\u003e\n\u003cli\u003eS30, S40, S45, S50, S60 bracket options — no custom adapters required\u003c\/li\u003e\n\u003cli\u003eHigh-strength alloy steel frame — absorbs shock and stress of continuous cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731172243_005.jpg?v=1785489948\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eOpening Range (mm)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-TS180\u003c\/td\u003e\n\u003ctd\u003e803×632×1132\u003c\/td\u003e\n\u003ctd\u003e170–660\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS30 \/ S40\u003c\/td\u003e\n\u003ctd\u003e190\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-TS250\u003c\/td\u003e\n\u003ctd\u003e833×632×1132\u003c\/td\u003e\n\u003ctd\u003e240–890\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e60\u003c\/td\u003e\n\u003ctd\u003eS45 \/ S50 \/ S60\u003c\/td\u003e\n\u003ctd\u003e350\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494735982837,"sku":"ME-TS180","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731172243_001_8ac8c7d6-9225-4630-8640-8f4027c2a50c.jpg?v=1785489986"},{"product_id":"landyindus-excavator-mechanical-quick-hitch-coupler-1-18-ton-mqc30-to-mqc70","title":"LANDYINDUS Excavator Mechanical Quick Hitch Coupler | 1–18 Ton | MQC30 to MQC70","description":"\u003ch2\u003eLANDYINDUS Excavator Mechanical Quick Hitch Coupler | 1–18 Ton | MQC30–MQC70\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS MQC Series Mechanical Excavator Quick Hitch Coupler\u003c\/strong\u003e is a professional-grade fast attachment system engineered to eliminate the time, effort, and safety risks associated with manual pin-on attachment changes on excavators from 1 to 18 tonnes. Designed for direct installation onto the excavator's dipper arm using the machine's existing pin configuration, this mechanical quick hitch allows operators to switch between buckets, hydraulic hammers, augers, compaction plates, rippers, and other pin-on attachments in under a minute — without leaving the cab, handling heavy pins under load, or exposing ground personnel to the machine's swing radius during changeover.\u003c\/p\u003e\n\u003ch3\u003eSingle-Operator Attachment Changes in Under a Minute\u003c\/h3\u003e\n\u003cp\u003eThe core productivity advantage of a mechanical quick hitch lies in transforming attachment changes from a multi-person, multi-minute manual operation into a \u003cstrong\u003esingle-operator task completed in under a minute from the cab\u003c\/strong\u003e. On busy construction, demolition, trenching, or bulk earthworks sites where attachment changes occur multiple times per shift, the cumulative time savings across a working week are substantial — reducing non-productive machine time, lowering labour costs, and keeping the excavator on task for a greater proportion of each working day.\u003c\/p\u003e\n\u003ch3\u003eNo Hydraulics, No Electrics — Simpler, More Reliable Than Hydraulic Quick Hitches\u003c\/h3\u003e\n\u003cp\u003eThe mechanical design eliminates the hydraulic lines, solenoids, and electrical connections required by hydraulic quick hitch systems — resulting in a \u003cstrong\u003esimpler, more robust, and lower-maintenance solution\u003c\/strong\u003e that performs reliably in the harshest site conditions without the risk of hydraulic failure or electrical fault.\u003c\/p\u003e\n\u003ch3\u003ePositive Locking Mechanism with Safety Retention System\u003c\/h3\u003e\n\u003cp\u003eThe mechanical locking mechanism provides a \u003cstrong\u003epositive, audible confirmation\u003c\/strong\u003e of secure attachment engagement, giving the operator confidence that the attachment is fully locked before commencing work. The integrated safety retention system prevents accidental attachment release in the event of operator error or unexpected load reversal during digging, lifting, or grading operations — a critical safety feature that distinguishes professional-grade quick hitch systems from lower-specification alternatives.\u003c\/p\u003e\n\u003ch3\u003eFive Models — 1T to 18T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-MQC30\u003c\/strong\u003e — 384×202×215mm | Axle Base 230.5mm | 31kg | Suits 1–2T | Confined access, landscaping \u0026amp; utility works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-MQC40\u003c\/strong\u003e — 450×234×241mm | Axle Base 300.5mm | 43kg | Suits 2–3.5T | Residential construction \u0026amp; drainage works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-MQC50\u003c\/strong\u003e — 612×312×271mm | Axle Base 430.5mm | 71kg | Suits 6–8T | Road works, bulk earthworks \u0026amp; civil construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-MQC60\u003c\/strong\u003e — 616×392×327mm | Axle Base 480.5mm | 114kg | Suits 10–14T | Heavy civil, pipeline \u0026amp; foundation works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-MQC70\u003c\/strong\u003e — 796×512×396mm | Axle Base 600.5mm | 179kg | Suits 16–18T | Quarrying, mining \u0026amp; major infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-operator attachment changes in under a minute from the cab\u003c\/li\u003e\n\u003cli\u003eNo hydraulic lines or electrics — simpler and more reliable than hydraulic quick hitches\u003c\/li\u003e\n\u003cli\u003ePositive audible locking confirmation before commencing work\u003c\/li\u003e\n\u003cli\u003eSafety retention system — prevents accidental release under load reversal\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel — withstands dynamic impact and cyclic fatigue loads\u003c\/li\u003e\n\u003cli\u003eDimensionally matched to pin spacing of each target excavator class\u003c\/li\u003e\n\u003cli\u003eFive models covering 1–18T across all major excavator brands\u003c\/li\u003e\n\u003cli\u003eCustom configurations and non-standard pin sizes available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731174410_005.jpg?v=1785491329\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAxle Base (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-MQC30\u003c\/td\u003e\n\u003ctd\u003e384\u003c\/td\u003e\n\u003ctd\u003e202\u003c\/td\u003e\n\u003ctd\u003e215\u003c\/td\u003e\n\u003ctd\u003e230.5\u003c\/td\u003e\n\u003ctd\u003e31\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-MQC40\u003c\/td\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003ctd\u003e234\u003c\/td\u003e\n\u003ctd\u003e241\u003c\/td\u003e\n\u003ctd\u003e300.5\u003c\/td\u003e\n\u003ctd\u003e43\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-MQC50\u003c\/td\u003e\n\u003ctd\u003e612\u003c\/td\u003e\n\u003ctd\u003e312\u003c\/td\u003e\n\u003ctd\u003e271\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-MQC60\u003c\/td\u003e\n\u003ctd\u003e616\u003c\/td\u003e\n\u003ctd\u003e392\u003c\/td\u003e\n\u003ctd\u003e327\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e114\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-MQC70\u003c\/td\u003e\n\u003ctd\u003e796\u003c\/td\u003e\n\u003ctd\u003e512\u003c\/td\u003e\n\u003ctd\u003e396\u003c\/td\u003e\n\u003ctd\u003e600.5\u003c\/td\u003e\n\u003ctd\u003e179\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48494749843701,"sku":"ME-MQC30","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260731174410_001.jpg?v=1785491345"},{"product_id":"landyindus-excavator-hydraulic-quick-hitch-coupler-fully-automatic-1-25-ton","title":"LANDYINDUS Excavator Hydraulic Quick Hitch Coupler | Fully Automatic | 1–25 Ton","description":"\u003ch2\u003eLANDYINDUS Excavator Hydraulic Quick Hitch Coupler | Fully Automatic | 1–25 Ton\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Hydraulic Excavator Quick Hitch Coupler\u003c\/strong\u003e is a fully automatic attachment changing system that allows the operator to connect, lock, and release pin-on attachments entirely from the cab — without stopping the machine, leaving the seat, or requiring ground personnel to assist. Covering excavator classes from 1 to 25 tonnes across eight model configurations, this hydraulic quick hitch represents the most comprehensive and operator-friendly attachment management solution available for civil construction, mining, demolition, and infrastructure operations.\u003c\/p\u003e\n\u003ch3\u003eFully Automatic from the Cab — Complete Attachment Change in Under 60 Seconds\u003c\/h3\u003e\n\u003cp\u003eWhere mechanical quick hitch systems still require the operator to exit the cab to engage the safety lock, the hydraulic coupler completes the entire attachment change cycle — \u003cstrong\u003eapproach, engage, lock, and verify\u003c\/strong\u003e — through the machine's existing hydraulic circuit. A single operator can switch between a digging bucket, hydraulic hammer, auger, compaction plate, or grading blade in under sixty seconds without any ground crew involvement — eliminating stop-work periods, manual handling risks, and personnel exposure to the machine's swing radius.\u003c\/p\u003e\n\u003ch3\u003eDual Hydraulic Pin Locking — Positive, Verifiable Lock Under Dynamic Loads\u003c\/h3\u003e\n\u003cp\u003eThe coupler operates via a \u003cstrong\u003edual hydraulic pin locking mechanism\u003c\/strong\u003e that engages both the front and rear pins of the attachment simultaneously, providing a positive, verifiable lock that cannot be achieved through manual operation alone. The hydraulic circuit maintains constant pressure on the locking pins throughout the work cycle — ensuring the attachment remains securely engaged even under dynamic shock loads, reversal forces, and lateral stresses generated during heavy digging, rock breaking, and material handling operations.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Safety Valve — Secondary Retention Against Hydraulic Pressure Loss\u003c\/h3\u003e\n\u003cp\u003eAn \u003cstrong\u003eintegrated safety valve\u003c\/strong\u003e prevents accidental attachment release in the event of hydraulic pressure loss, providing a critical secondary retention system that meets the safety expectations of major project owners, principal contractors, and site safety regulators across the construction and mining sectors.\u003c\/p\u003e\n\u003ch3\u003eEight Models — 1T to 25T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-QC30-150H\u003c\/strong\u003e — 301×152×186mm | Axle Base 200mm | 15kg | Suits 1–2T | Confined access \u0026amp; utility works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-QC30H\u003c\/strong\u003e — 332×182×186mm | 17kg | Suits 1–2T | Landscaping \u0026amp; light utility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-QC40H\u003c\/strong\u003e — 420×202×201mm | 27kg | Suits 2–3.5T | Residential construction \u0026amp; drainage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-QC45H\u003c\/strong\u003e — 592×292×262mm | 95kg | Suits 4–6T | General civil \u0026amp; earthworks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-QC50H\u003c\/strong\u003e — 610×272×262mm | 94kg | Suits 6–8T | Road works \u0026amp; civil construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-QC60H\u003c\/strong\u003e — 695×342×315mm | 158kg | Suits 10–14T | Heavy civil \u0026amp; pipeline works\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-QC70H\u003c\/strong\u003e — 862×452×380mm | 262kg | Suits 16–18T | Quarrying \u0026amp; major infrastructure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-QC80H\u003c\/strong\u003e — 930×592×395mm | 343kg | Suits 20–25T | Mining, bulk earthworks \u0026amp; large demolition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully automatic — complete attachment change from the cab in under 60 seconds\u003c\/li\u003e\n\u003cli\u003eNo ground crew required — eliminates swing radius exposure and manual handling risk\u003c\/li\u003e\n\u003cli\u003eDual hydraulic pin locking — front and rear pins engaged simultaneously\u003c\/li\u003e\n\u003cli\u003eConstant hydraulic pressure on locking pins throughout the work cycle\u003c\/li\u003e\n\u003cli\u003eIntegrated safety valve — secondary retention against pressure loss\u003c\/li\u003e\n\u003cli\u003eEight models covering 1–25T across all major excavator brands\u003c\/li\u003e\n\u003cli\u003eCompatible with digging buckets, hammers, augers, compaction plates \u0026amp; grading blades\u003c\/li\u003e\n\u003cli\u003eCustom configurations for non-standard pin spacings available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803161704_005.jpg?v=1785745196\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAxle Base (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-QC30-150H\u003c\/td\u003e\n\u003ctd\u003e301\u003c\/td\u003e\n\u003ctd\u003e152\u003c\/td\u003e\n\u003ctd\u003e186\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-QC30H\u003c\/td\u003e\n\u003ctd\u003e332\u003c\/td\u003e\n\u003ctd\u003e182\u003c\/td\u003e\n\u003ctd\u003e186\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-QC40H\u003c\/td\u003e\n\u003ctd\u003e420\u003c\/td\u003e\n\u003ctd\u003e202\u003c\/td\u003e\n\u003ctd\u003e201\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-QC45H\u003c\/td\u003e\n\u003ctd\u003e592\u003c\/td\u003e\n\u003ctd\u003e292\u003c\/td\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-QC50H\u003c\/td\u003e\n\u003ctd\u003e610\u003c\/td\u003e\n\u003ctd\u003e272\u003c\/td\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e94\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-QC60H\u003c\/td\u003e\n\u003ctd\u003e695\u003c\/td\u003e\n\u003ctd\u003e342\u003c\/td\u003e\n\u003ctd\u003e315\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e158\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-QC70H\u003c\/td\u003e\n\u003ctd\u003e862\u003c\/td\u003e\n\u003ctd\u003e452\u003c\/td\u003e\n\u003ctd\u003e380\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-QC80H\u003c\/td\u003e\n\u003ctd\u003e930\u003c\/td\u003e\n\u003ctd\u003e592\u003c\/td\u003e\n\u003ctd\u003e395\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e343\u003c\/td\u003e\n\u003ctd\u003e20–25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501022327029,"sku":"ME-QC30-150H","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803161704_001.png?v=1785745238"},{"product_id":"landyindus-excavator-bracket-adapter-s50-s60-to-sms-euro-attachment-coupler-conversion","title":"LANDYINDUS Excavator Bracket Adapter S50 S60 to SMS Euro | Attachment Coupler Conversion","description":"\u003ch2\u003eLANDYINDUS E-S50\/S60 to SMS\/EURO Excavator Bracket Adapter | Coupler Conversion\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-S50\/S60 to SMS\/EURO Excavator Bracket Adapter\u003c\/strong\u003e is a precision-engineered coupler conversion solution that enables S50 and S60 class excavators to operate the full range of SMS and EURO standard attachments — opening access to one of the widest and most established attachment ecosystems in the global construction and earthworks equipment market. Designed for direct installation onto the existing S50 or S60 dipper arm bracket without permanent machine modification, this adapter bridges the dimensional and pin-geometry gap between the Asian S-series bracket standard and the European SMS\/EURO quick hitch standard.\u003c\/p\u003e\n\u003ch3\u003eAccess the Full SMS \u0026amp; EURO Attachment Ecosystem — Instantly\u003c\/h3\u003e\n\u003cp\u003eThe SMS (Swedish Machine Standard) and EURO hitch systems represent the dominant attachment coupling standards across European construction, civil works, and mining markets, adopted by leading manufacturers including \u003cstrong\u003eLehnhoff, Steelwrist, Engcon, and OilQuick\u003c\/strong\u003e. By installing this adapter, operators running S50 or S60 bracket excavators gain immediate access to this extensive ecosystem — eliminating the need to purchase S-series specific alternatives, enabling attachment sharing with European-standard machines on mixed-fleet sites, and significantly expanding the range of hire attachments available from equipment rental companies that stock primarily SMS and EURO compatible tooling.\u003c\/p\u003e\n\u003ch3\u003eNo Permanent Machine Modification Required\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the existing pin bores and bracket geometry of the host machine's S50 or S60 dipper arm as the mounting interface. \u003cstrong\u003eNo welding, drilling, or permanent modification\u003c\/strong\u003e to the excavator is required — preserving the machine's original configuration and resale value while enabling full SMS and EURO attachment compatibility for the duration of the adapter's installation.\u003c\/p\u003e\n\u003ch3\u003eHeavy-Duty Construction — 1,159 × 782 × 604mm | 180kg\u003c\/h3\u003e\n\u003cp\u003eManufactured to heavy-duty industrial specifications from \u003cstrong\u003ehigh-strength structural steel\u003c\/strong\u003e, the adapter measures 1,159 × 782 × 604 mm and weighs 180 kg — engineered to withstand the dynamic impact loads, cyclic fatigue stresses, and abrasive conditions generated during continuous excavation, rock breaking, bulk material handling, and demolition operations with S50 and S60 class machines. The robust construction ensures dimensional stability and structural integrity across extended service periods without deformation or bracket wear.\u003c\/p\u003e\n\u003ch3\u003eBroad Machine Compatibility — S50 \u0026amp; S60 Bracket Excavators\u003c\/h3\u003e\n\u003cp\u003eCompatible with a broad range of excavator brands and models fitted with S50 or S60 bracket specifications, including machines from \u003cstrong\u003eKomatsu, Hitachi, Volvo, Doosan, Hyundai\u003c\/strong\u003e, and other major manufacturers whose mid-to-large class excavators are commonly configured to the S50 or S60 standard in Asia-Pacific and global markets.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts S50\/S60 excavators to full SMS \u0026amp; EURO attachment compatibility\u003c\/li\u003e\n\u003cli\u003eAccess Lehnhoff, Steelwrist, Engcon, OilQuick \u0026amp; European-standard tooling\u003c\/li\u003e\n\u003cli\u003eNo welding, drilling, or permanent machine modification required\u003c\/li\u003e\n\u003cli\u003ePreserves original machine configuration and resale value\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel — 1,159×782×604mm | 180kg\u003c\/li\u003e\n\u003cli\u003eSuits Komatsu, Hitachi, Volvo, Doosan, Hyundai \u0026amp; other S50\/S60 machines\u003c\/li\u003e\n\u003cli\u003eIdeal for international projects, mixed-fleet sites \u0026amp; European attachment hire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803162237_005.jpg?v=1785745521\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eBracket Type\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-S50\/S60 to SMS\/EURO\u003c\/td\u003e\n\u003ctd\u003e1159×782×604\u003c\/td\u003e\n\u003ctd\u003eS50 \/ S60\u003c\/td\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501024129269,"sku":"E-S50\/S60 TO SMS","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803162237_001.jpg?v=1785745536"},{"product_id":"landyindus-excavator-to-skid-steer-adapter-plate-universal-quick-attach-attachment-adapter","title":"LANDYINDUS Excavator to Skid Steer Adapter Plate | Universal Quick Attach Attachment Adapter","description":"\u003ch2\u003eLANDYINDUS Excavator to Skid Steer Adapter Plate | Universal Quick Attach Attachment Adapter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS ME-BK to MP1140 Excavator to Skid Steer Adapter Plate\u003c\/strong\u003e is a universal attachment compatibility solution that allows excavator operators to directly mount and use the full range of skid steer quick attach compatible attachments on their excavator — unlocking access to one of the largest and most diverse attachment ecosystems in the construction equipment market without purchasing a separate skid steer loader. By bridging the dimensional and mounting geometry gap between the excavator's dipper arm bracket and the universal skid steer quick attach plate standard, this adapter enables a single excavator to run skid steer buckets, augers, trenchers, mulchers, cold planers, sweeper brooms, snow blowers, and a wide variety of other skid steer tooling.\u003c\/p\u003e\n\u003ch3\u003eAccess the World's Largest Attachment Ecosystem — Skid Steer Quick Attach\u003c\/h3\u003e\n\u003cp\u003eSkid steer attachments are manufactured by hundreds of suppliers worldwide and available for hire from virtually every major equipment rental company across \u003cstrong\u003eNorth America, Australia, and Europe\u003c\/strong\u003e — making them significantly easier to source, more competitively priced, and more readily available at short notice than equivalent excavator-specific attachments. By installing this adapter, operators gain access to the entire skid steer supply network, enabling faster attachment procurement, lower attachment costs, and greater operational flexibility on projects where specific tooling needs to be sourced quickly.\u003c\/p\u003e\n\u003ch3\u003eCompatible with All Major Skid Steer Attachment Brands\u003c\/h3\u003e\n\u003cp\u003eDesigned to the universal skid steer quick attach plate geometry, the adapter ensures compatibility with attachments from all major manufacturers including \u003cstrong\u003eBobcat, Caterpillar, John Deere, Case, Kubota, Takeuchi\u003c\/strong\u003e, and other brands whose attachments conform to the universal quick attach standard — covering the complete range of skid steer tooling available in the global hire and purchase market.\u003c\/p\u003e\n\u003ch3\u003eNo Permanent Machine Modification Required\u003c\/h3\u003e\n\u003cp\u003eInstallation uses the existing pin bores and bracket geometry of the host excavator's dipper arm with \u003cstrong\u003eno welding, drilling, or permanent modification\u003c\/strong\u003e to the machine required — preserving the excavator's original bracket configuration and resale value. The bolt-on excavator bracket hitch interface (Type SH, available upon request) provides a secure and stable mounting connection. Once fitted, the adapter allows rapid attachment changes using the standard skid steer quick attach lever or latch mechanism.\u003c\/p\u003e\n\u003ch3\u003eHeavy-Duty Steel Construction — 1,050 × 546 × 423mm | 73kg\u003c\/h3\u003e\n\u003cp\u003eManufactured from \u003cstrong\u003ehigh-strength structural steel\u003c\/strong\u003e, the adapter measures 1,050 × 546 × 423 mm and weighs 73 kg — engineered to withstand the dynamic loads, impact forces, and cyclic stresses generated during continuous excavation, trenching, grading, and material handling operations. The robust construction ensures dimensional stability and precise alignment between the excavator bracket and skid steer attachment interface across extended service periods.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts excavator to run full range of universal skid steer quick attach tooling\u003c\/li\u003e\n\u003cli\u003eAccess Bobcat, Cat, John Deere, Case, Kubota, Takeuchi \u0026amp; all universal QA attachments\u003c\/li\u003e\n\u003cli\u003eSkid steer attachments — easier to source, hire \u0026amp; purchase than excavator-specific alternatives\u003c\/li\u003e\n\u003cli\u003eNo welding, drilling, or permanent machine modification required\u003c\/li\u003e\n\u003cli\u003ePreserves original excavator bracket configuration and resale value\u003c\/li\u003e\n\u003cli\u003eHigh-strength structural steel — 1,050×546×423mm | 73kg\u003c\/li\u003e\n\u003cli\u003eType SH bolt-on bracket hitch available upon request\u003c\/li\u003e\n\u003cli\u003eIdeal for landscaping, civil construction, plant hire \u0026amp; mixed-fleet operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803162816_005.png?v=1785745826\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-BK TO MP1140\u003c\/td\u003e\n\u003ctd\u003e1050×546×423\u003c\/td\u003e\n\u003ctd\u003e73\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501026488565,"sku":"ME-BK TO MP1140","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803162816_001.jpg?v=1785745840"},{"product_id":"landyindus-excavator-blade-mounted-self-dumping-hopper-0-5-1-5m-tipping-skip-dumper","title":"LANDYINDUS Excavator Blade-Mounted Self-Dumping Hopper | 0.5–1.5m³ | Tipping Skip Dumper","description":"\u003ch2\u003eLANDYINDUS E-BGD Series Excavator Blade-Mounted Self-Dumping Hopper | 0.5–1.5m³ | Tipping Skip Dumper\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-BGD Series Excavator Blade-Mounted Tipping Dumper\u003c\/strong\u003e is a heavy-duty material transport and handling solution that attaches directly to the blade of a standard excavator, transforming the machine into a self-sufficient material mover capable of loading, transporting, and self-dumping bulk materials across construction sites, mining operations, civil works projects, and any terrain where conventional wheeled dumpers, forklifts, or manual handling methods are impractical or unsafe. Available in three capacities — \u003cstrong\u003e0.5 m³, 1.0 m³, and 1.5 m³\u003c\/strong\u003e — and manufactured from 3 mm heavy-gauge steel plate throughout, the E-BGD series provides a robust, purpose-engineered attachment for moving soil, rubble, aggregate, demolition debris, and bulk materials without relying on additional plant or ground crew.\u003c\/p\u003e\n\u003ch3\u003eGoes Where Wheeled Dumpers Cannot — Blade-Mounted for Any Terrain\u003c\/h3\u003e\n\u003cp\u003eThe defining advantage of the blade-mounted design is the excavator's ability to carry the loaded dumper across terrain that would be impassable for wheeled or tracked dumpers operating independently. Mounting directly to the excavator's dozer blade via \u003cstrong\u003eadjustable blade mounts compatible with virtually any excavator configuration\u003c\/strong\u003e, the E-BGD travels with the machine across slopes, soft ground, muddy conditions, rocky terrain, and confined site areas — making it particularly valuable on remote construction sites, hillside civil works, underground or basement excavation projects, and any application where a separate transport vehicle would represent additional cost and logistical complexity.\u003c\/p\u003e\n\u003ch3\u003eSingle-Operator Load, Transport \u0026amp; Self-Dump Cycle — No Ground Crew Required\u003c\/h3\u003e\n\u003cp\u003eThe operator uses the excavator's own bucket to load the dumper directly from the excavation face or stockpile, then repositions the machine to the desired dump location. At the dump point, the hopper \u003cstrong\u003etilts forward under the operator's control\u003c\/strong\u003e, discharging the full load cleanly and completely without manual intervention, spillage, or a second operator. This single-operator, self-contained workflow eliminates coordination delays, labour costs, and safety risks associated with ground crew-assisted material handling in active excavation zones.\u003c\/p\u003e\n\u003ch3\u003eThree Capacities — 0.5m³ to 1.5m³ for Every Excavator Class\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-BGD500\u003c\/strong\u003e — 1300×1234×840mm | 3mm plate | 0.5m³ | 145kg | Compact excavators \u0026amp; confined site conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-BGD1000\u003c\/strong\u003e — 1720×1424×1065mm | 3mm plate | 1.0m³ | 221kg | Mid-size excavators \u0026amp; general construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-BGD1500\u003c\/strong\u003e — 1845×1586×1093mm | 3mm plate | 1.5m³ | 330kg | Large excavators \u0026amp; high-volume civil, mining \u0026amp; demolition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3mm Heavy-Gauge Steel — Built for Continuous Heavy-Cycle Operation\u003c\/h3\u003e\n\u003cp\u003eManufactured from \u003cstrong\u003e3 mm heavy-gauge steel plate throughout\u003c\/strong\u003e, the E-BGD series is engineered to withstand the repeated impact, abrasion, and load cycles of continuous bulk material transport in demanding construction, mining, and demolition environments. The adjustable blade mount system ensures compatibility with a wide range of excavator makes and models without modification to the host machine.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlade-mounted — travels with the excavator across any terrain wheeled dumpers cannot access\u003c\/li\u003e\n\u003cli\u003eSingle-operator load, transport \u0026amp; self-dump cycle — no ground crew required\u003c\/li\u003e\n\u003cli\u003eSelf-tipping hopper — operator-controlled forward tilt, clean full discharge\u003c\/li\u003e\n\u003cli\u003eThree capacities: 0.5m³, 1.0m³, 1.5m³ for compact to large excavators\u003c\/li\u003e\n\u003cli\u003e3mm heavy-gauge steel plate construction throughout\u003c\/li\u003e\n\u003cli\u003eAdjustable blade mounts — fits virtually any excavator make and model\u003c\/li\u003e\n\u003cli\u003eNo modification to host machine required\u003c\/li\u003e\n\u003cli\u003eIdeal for remote sites, slopes, confined areas \u0026amp; underground excavation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803163214_006.jpg?v=1785746130\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (L×W×H) mm\u003c\/th\u003e\n\u003cth\u003ePlate Thickness (mm)\u003c\/th\u003e\n\u003cth\u003eVolume (m³)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-BGD500\u003c\/td\u003e\n\u003ctd\u003e1300×1234×840\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e0.50\u003c\/td\u003e\n\u003ctd\u003e145\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-BGD1000\u003c\/td\u003e\n\u003ctd\u003e1720×1424×1065\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e1.00\u003c\/td\u003e\n\u003ctd\u003e221\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-BGD1500\u003c\/td\u003e\n\u003ctd\u003e1845×1586×1093\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e1.50\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501030256885,"sku":"E-BGD500","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803163214_001.jpg?v=1785746174"},{"product_id":"landyindus-excavator-sms-swedish-standard-hitch-bracket-10-14-ton-c45-steel-flux-core-weld","title":"LANDYINDUS Excavator SMS Swedish Standard Hitch Bracket | 10–14 Ton | C45 Steel Flux Core Weld","description":"\u003ch2\u003eLANDYINDUS E-B20 Excavator SMS Swedish Standard Hitch Bracket | 10–14 Ton | C45 Steel Flux Core Weld\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-B20 SMS Swedish Standard Excavator Bracket\u003c\/strong\u003e is a precision-manufactured dipper arm hitch plate engineered to the SMS (Swedish Machine Standard) specification — the dominant quick hitch and attachment coupling standard across European construction, civil works, and mining markets. Designed for 10–14 tonne excavators, the E-B20 provides the structural foundation for a wide range of attachment configurations on mid-to-large class machines, delivering the dimensional accuracy, weld integrity, and material strength required to perform reliably under the dynamic loads, impact forces, and cyclic stresses of continuous heavy excavation, rock breaking, and demolition operations.\u003c\/p\u003e\n\u003ch3\u003eSMS Standard — Access the Broadest European Attachment Ecosystem\u003c\/h3\u003e\n\u003cp\u003eThe SMS standard is supported by the world's leading tiltrotator and quick hitch manufacturers including \u003cstrong\u003eSteelwrist, Engcon, Lehnhoff, Kinshofer, and OilQuick\u003c\/strong\u003e — all of whom design their quick hitch systems and compatible attachments to the SMS interface geometry. By specifying an SMS-standard bracket, operators gain access to the broadest and most established attachment ecosystem in the global construction equipment market, enabling the use of SMS-compatible buckets, hydraulic hammers, augers, compaction plates, tiltrotators, and multi-processors sourced from European suppliers, international hire fleets, and the extensive secondary market for SMS-standard tooling.\u003c\/p\u003e\n\u003ch3\u003eFlux-Cored Wire Welding — Deeper Penetration Than Standard MIG\u003c\/h3\u003e\n\u003cp\u003eAll structural welds are performed using \u003cstrong\u003eflux-cored wire welding\u003c\/strong\u003e — a process that delivers significantly deeper penetration, higher tensile strength, and superior resistance to fatigue cracking compared to standard MIG welding methods. All primary weld joints are \u003cstrong\u003ebeveled prior to welding\u003c\/strong\u003e to maximise material penetration at the joint interface, achieving full fusion with the parent steel rather than surface bonding that can initiate fatigue cracks under cyclic loading from heavy-duty excavation and rock breaking with 10–14 tonne machines.\u003c\/p\u003e\n\u003ch3\u003eC45 Steel Axles \u0026amp; Precision-Drilled Pin Bores\u003c\/h3\u003e\n\u003cp\u003ePin bore holes are \u003cstrong\u003eprecision-drilled to tight dimensional tolerances\u003c\/strong\u003e, and all axles are manufactured from \u003cstrong\u003eC45 medium-carbon steel\u003c\/strong\u003e — a material specification that provides the combination of tensile strength, hardness, and toughness required to resist wear, deformation, and fatigue failure at the pin interface under continuous heavy-duty operating conditions.\u003c\/p\u003e\n\u003ch3\u003eCompatible with Volvo, Doosan, Hyundai, Liebherr \u0026amp; More\u003c\/h3\u003e\n\u003cp\u003eThe E-B20 measures \u003cstrong\u003e894 × 450 × 300 mm and weighs 90 kg\u003c\/strong\u003e, dimensioned to the SMS standard geometry for 10–14 tonne excavators and compatible with the dipper arm pin configurations of major manufacturers including \u003cstrong\u003eVolvo, Doosan, Hyundai, Liebherr\u003c\/strong\u003e, and other European and Asian manufacturers whose mid-to-large class excavators are widely deployed on civil construction, pipeline installation, quarrying, and infrastructure projects where SMS attachment compatibility is a standard project requirement.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSMS (Swedish Machine Standard) geometry — compatible with Steelwrist, Engcon, Lehnhoff, Kinshofer \u0026amp; OilQuick\u003c\/li\u003e\n\u003cli\u003eFlux-cored wire welding throughout — deeper penetration \u0026amp; higher tensile strength than MIG\u003c\/li\u003e\n\u003cli\u003eBeveled weld joints — full material fusion at every structural interface\u003c\/li\u003e\n\u003cli\u003ePrecision-drilled pin bores — accurate alignment, zero play\u003c\/li\u003e\n\u003cli\u003eC45 medium-carbon steel axles — wear, deformation \u0026amp; fatigue resistant\u003c\/li\u003e\n\u003cli\u003e894×450×300mm | 90kg | Suits 10–14T excavators\u003c\/li\u003e\n\u003cli\u003eCompatible with Volvo, Doosan, Hyundai, Liebherr \u0026amp; other SMS-standard machines\u003c\/li\u003e\n\u003cli\u003eCustom specifications available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803164610_004.jpg?v=1785746914\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-B20\u003c\/td\u003e\n\u003ctd\u003e894\u003c\/td\u003e\n\u003ctd\u003e450\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501038776565,"sku":"E-B20","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803164610_001.jpg?v=1785746933"},{"product_id":"landyindus-excavator-cross-rotating-swivel-mount-bracket-s30-s70-1-18-ton-universal-attachment","title":"LANDYINDUS Excavator Cross Rotating Swivel Mount Bracket | S30–S70 | 1–18 Ton Universal Attachment","description":"\u003ch2\u003eLANDYINDUS E-CR Series Excavator Cross Rotating Swivel Mount Bracket | S30–S70 | 1–18 Ton\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-CR Series Excavator Cross Rotating Swivel Mount Bracket\u003c\/strong\u003e is a precision-engineered universal attachment mounting solution that provides a rigid, accurately dimensioned cross-pattern interface between the excavator's dipper arm and a wide range of centred-load attachments — including hydraulic breakers, demolition hammers, compaction plates, vibratory rollers, and plate compactors. Available in seven standard configurations from S30 through to S70, covering excavator operating weights from 1 to 18 tonnes, the E-CR series provides a structurally optimised bracket geometry for centred-load attachments across the full range of excavator classes used in construction, demolition, mining, and civil works applications.\u003c\/p\u003e\n\u003ch3\u003eCross Geometry — Four-Point Load Distribution for High-Impact Attachments\u003c\/h3\u003e\n\u003cp\u003eThe cross mounting geometry is specifically engineered to address the structural limitations of standard straight-bottom pin-on brackets when used with attachments that generate high centred impact loads — most notably \u003cstrong\u003ehydraulic breakers and demolition hammers\u003c\/strong\u003e, where percussive force is transmitted vertically through the centre of the attachment body. The symmetrical cross pattern distributes this centred load evenly across \u003cstrong\u003efour contact points rather than two\u003c\/strong\u003e, significantly reducing stress concentration at each individual mounting point and extending the service life of both the bracket and the attachment mounting lugs under high-cycle impact loading during continuous rock breaking, concrete demolition, and hard ground penetration work.\u003c\/p\u003e\n\u003ch3\u003eGround Mounting Surfaces — Straight, Flat Bottom for Full Even Contact\u003c\/h3\u003e\n\u003cp\u003eEvery bracket features \u003cstrong\u003eground mounting surfaces machined to a straight, flat bottom profile\u003c\/strong\u003e — ensuring full, even contact between the bracket mounting face and the attachment mounting plate without gaps, rocking, or misalignment that would concentrate load at contact edges and accelerate wear. The ground finish eliminates the surface irregularities inherent in flame-cut or plasma-cut mounting faces, providing a precision seating surface that maintains consistent attachment alignment throughout the service life of the bracket.\u003c\/p\u003e\n\u003ch3\u003eFlux-Cored Wire Welding \u0026amp; Beveled Joints — Maximum Penetration \u0026amp; Fatigue Resistance\u003c\/h3\u003e\n\u003cp\u003eAll structural welds are performed using \u003cstrong\u003eflux-cored wire welding\u003c\/strong\u003e for maximum penetration and tensile strength, with \u003cstrong\u003ebeveled weld preparation at all primary joints\u003c\/strong\u003e to ensure full fusion with the parent steel and resistance to fatigue cracking under the cyclic impact loads characteristic of hydraulic breaker and demolition hammer operation.\u003c\/p\u003e\n\u003ch3\u003eSeven Models — 1T to 18T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CR-S30\/S30\u003c\/strong\u003e — 300×300×67mm | Axle Base 230.5mm | 14kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CR-S30\/S30-150\u003c\/strong\u003e — 268×268×67mm | Axle Base 200mm | 12kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CR-S40\/S40\u003c\/strong\u003e — 372×372×71mm | Axle Base 300.5mm | 30kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CR-S45\/S45\u003c\/strong\u003e — 520×520×86mm | Axle Base 430.5mm | 56kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CR-S50\/S50\u003c\/strong\u003e — 530×530×90mm | Axle Base 430.5mm | 70kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CR-S60\/S60\u003c\/strong\u003e — 575×575×110mm | Axle Base 480.5mm | 109kg | Suits 10–14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CR-S70\/S70\u003c\/strong\u003e — 740×740×140mm | Axle Base 600.5mm | 188kg | Suits 16–18T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCross geometry — four-point load distribution vs two-point on standard straight brackets\u003c\/li\u003e\n\u003cli\u003ePurpose-built for hydraulic breakers, demolition hammers \u0026amp; compaction attachments\u003c\/li\u003e\n\u003cli\u003eGround mounting surfaces — straight flat bottom, full even contact, no rocking\u003c\/li\u003e\n\u003cli\u003eFlux-cored wire welding — deeper penetration \u0026amp; higher tensile strength than MIG\u003c\/li\u003e\n\u003cli\u003eBeveled weld joints — full material fusion, fatigue crack resistant\u003c\/li\u003e\n\u003cli\u003eHigh-quality structural steel throughout\u003c\/li\u003e\n\u003cli\u003eSeven models S30–S70 covering 1–18T excavator classes\u003c\/li\u003e\n\u003cli\u003eNon-standard configurations \u0026amp; custom axle base dimensions available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803165636_003.jpg?v=1785747655\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAxle Base (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CR-S30\/S30\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e230.5\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CR-S30\/S30-150\u003c\/td\u003e\n\u003ctd\u003e268\u003c\/td\u003e\n\u003ctd\u003e268\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e200\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CR-S40\/S40\u003c\/td\u003e\n\u003ctd\u003e372\u003c\/td\u003e\n\u003ctd\u003e372\u003c\/td\u003e\n\u003ctd\u003e71\u003c\/td\u003e\n\u003ctd\u003e300.5\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CR-S45\/S45\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003ctd\u003e520\u003c\/td\u003e\n\u003ctd\u003e86\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CR-S50\/S50\u003c\/td\u003e\n\u003ctd\u003e530\u003c\/td\u003e\n\u003ctd\u003e530\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CR-S60\/S60\u003c\/td\u003e\n\u003ctd\u003e575\u003c\/td\u003e\n\u003ctd\u003e575\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e109\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CR-S70\/S70\u003c\/td\u003e\n\u003ctd\u003e740\u003c\/td\u003e\n\u003ctd\u003e740\u003c\/td\u003e\n\u003ctd\u003e140\u003c\/td\u003e\n\u003ctd\u003e600.5\u003c\/td\u003e\n\u003ctd\u003e188\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501043855605,"sku":"ME-CR-S30\/S30","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803165636_001.jpg?v=1785747665"},{"product_id":"landyindus-excavator-dual-standard-combination-bracket-s30-s70-1-18-ton-combi-adapter","title":"LANDYINDUS Excavator Dual Standard Combination Bracket | S30–S70 | 1–18 Ton Combi Adapter","description":"\u003ch2\u003eLANDYINDUS E-CB Series Excavator Dual Standard Combination Bracket | S30–S70 | 1–18 Ton Combi Adapter\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-CB Series Excavator Combi Combination Mounting Bracket\u003c\/strong\u003e is a specialist dual-standard attachment interface solution engineered for operators, plant hire companies, and fleet managers who need to bridge the dimensional gap between two different S-series bracket standards on a single machine — enabling attachments specified to one S-series standard to be used on an excavator fitted with a different S-series dipper arm configuration, without permanent machine modification or the purchase of duplicate attachments in a second bracket standard.\u003c\/p\u003e\n\u003ch3\u003eOne Bracket, Two S-Series Standards — Eliminate Mixed-Fleet Compatibility Barriers\u003c\/h3\u003e\n\u003cp\u003eUnlike standard single-standard pin-on brackets, the E-CB Combi Bracket incorporates \u003cstrong\u003etwo distinct axle base dimensions within a single bracket body\u003c\/strong\u003e — providing simultaneous compatibility with two S-series standards. In a typical mixed-fleet scenario — for example, a site running both S40-bracket compact excavators and S60-bracket mid-size machines — a single set of combi brackets allows the same attachment to be used across both machine classes without modification, reducing the total number of attachments required, simplifying attachment logistics, and maximising utilisation across the full fleet.\u003c\/p\u003e\n\u003ch3\u003ePrecision Ground Straight-Bottom Mounting Face — Full Even Contact on Both Interfaces\u003c\/h3\u003e\n\u003cp\u003eThe E-CB series features \u003cstrong\u003eS-coupling geometry with a precision ground straight-bottom mounting face on both coupling interfaces\u003c\/strong\u003e, ensuring full, even contact between the bracket and the attachment mounting plate at both the machine-side and attachment-side interfaces without gaps, rocking, or misalignment. The ground finish eliminates surface irregularities inherent in unfinished cut faces, providing a precision seating surface that maintains consistent attachment alignment and load distribution throughout the service life of the bracket across both coupling interfaces simultaneously.\u003c\/p\u003e\n\u003ch3\u003eHigh-Quality Structural Steel — Tensile Strength, Toughness \u0026amp; Weldability\u003c\/h3\u003e\n\u003cp\u003eAll structural components are manufactured from \u003cstrong\u003ehigh-quality structural steel\u003c\/strong\u003e selected for the combination of tensile strength, toughness, and weldability required to perform reliably under the dynamic loads, impact forces, and cyclic stresses generated during continuous excavation, material handling, and demolition operations across the full range of compatible excavator classes.\u003c\/p\u003e\n\u003ch3\u003eFive Models — Most Common Dual-Standard Combinations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-CB-S30\/S40\u003c\/strong\u003e — 390×234×70mm | Axle Base A: 300.5mm \/ B: 230.5mm | 14kg | Suits 1–2T | S30–S40 cross-standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CB-S45\/S50\u003c\/strong\u003e — 620×332×70mm | Axle Base A: 430.5mm \/ B: 430.5mm | 39kg | Suits 4–6T | S45\/S50 dual compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CB-S45\/S60\u003c\/strong\u003e — 693×392×130mm | Axle Base A: 480.5mm \/ B: 430.5mm | 54kg | Suits 6–8T | S45\/S60 dual compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CB-S50\/S60\u003c\/strong\u003e — 620×392×130mm | Axle Base A: 480.5mm \/ B: 430.5mm | 58kg | Suits 10–14T | S50\/S60 dual compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-CB-S60\/S70\u003c\/strong\u003e — 740×502×115mm | Axle Base A: 600.5mm \/ B: 480.5mm | 79kg | Suits 16–18T | S60\/S70 cross-standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual S-series standards in one bracket body — no machine modification required\u003c\/li\u003e\n\u003cli\u003eEliminates attachment compatibility barriers across mixed S-series excavator fleets\u003c\/li\u003e\n\u003cli\u003eReduces total attachment inventory — one attachment serves multiple machine classes\u003c\/li\u003e\n\u003cli\u003ePrecision ground straight-bottom mounting face on both coupling interfaces\u003c\/li\u003e\n\u003cli\u003eFull even contact — no gaps, rocking, or misalignment under load\u003c\/li\u003e\n\u003cli\u003eHigh-quality structural steel — tensile strength, toughness \u0026amp; weldability\u003c\/li\u003e\n\u003cli\u003eFive standard models covering most common dual-standard combinations\u003c\/li\u003e\n\u003cli\u003eCustom dual-standard configurations available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803170432_004.jpg?v=1785748333\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eLength (mm)\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eAxle Base A (mm)\u003c\/th\u003e\n\u003cth\u003eAxle Base B (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-CB-S30\/S40\u003c\/td\u003e\n\u003ctd\u003e390\u003c\/td\u003e\n\u003ctd\u003e234\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e300.5\u003c\/td\u003e\n\u003ctd\u003e230.5\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CB-S45\/S50\u003c\/td\u003e\n\u003ctd\u003e620\u003c\/td\u003e\n\u003ctd\u003e332\u003c\/td\u003e\n\u003ctd\u003e70\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e39\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CB-S45\/S60\u003c\/td\u003e\n\u003ctd\u003e693\u003c\/td\u003e\n\u003ctd\u003e392\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e54\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CB-S50\/S60\u003c\/td\u003e\n\u003ctd\u003e620\u003c\/td\u003e\n\u003ctd\u003e392\u003c\/td\u003e\n\u003ctd\u003e130\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e430.5\u003c\/td\u003e\n\u003ctd\u003e58\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-CB-S60\/S70\u003c\/td\u003e\n\u003ctd\u003e740\u003c\/td\u003e\n\u003ctd\u003e502\u003c\/td\u003e\n\u003ctd\u003e115\u003c\/td\u003e\n\u003ctd\u003e600.5\u003c\/td\u003e\n\u003ctd\u003e480.5\u003c\/td\u003e\n\u003ctd\u003e79\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501070725365,"sku":"ME-CB-S30\/S40","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803170432_001.jpg?v=1785748347"},{"product_id":"landyindus-excavator-weld-on-hitch-bracket-john-deere-kubota-bucket-attachment-conversion","title":"LANDYINDUS Excavator Weld-On Hitch Bracket | John Deere \u0026 Kubota Bucket Attachment Conversion","description":"\u003ch2\u003eLANDYINDUS Excavator Weld-On Hitch Bracket | John Deere \u0026amp; Kubota Bucket Attachment Conversion\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Excavator Weld-On Hitch Bracket\u003c\/strong\u003e is a precision-manufactured attachment conversion component designed to retrofit standard excavator buckets, grabs, and other front-end attachments with a compatible hitch interface — enabling existing attachments to be used with quick hitch coupler systems or to match the specific bracket geometry required by the host excavator's dipper arm configuration. Available in nine model configurations specifically engineered for \u003cstrong\u003eJohn Deere and Kubota excavators\u003c\/strong\u003e, plus universal configurations for other machine brands, these weld-on hitch brackets provide the most cost-effective method of upgrading existing attachment inventory to quick hitch compatibility without replacing the attachment itself.\u003c\/p\u003e\n\u003ch3\u003eConvert Existing Pin-On Attachments to Quick Hitch Compatibility — No New Attachment Required\u003c\/h3\u003e\n\u003cp\u003eThe primary application is the conversion of existing pin-on excavator buckets and attachments to quick hitch compatibility — allowing attachments originally purchased for direct pin-on use to be operated through a mechanical or hydraulic quick hitch coupler system, \u003cstrong\u003eeliminating the need to purchase new quick hitch-compatible attachments\u003c\/strong\u003e and maximising the return on existing attachment investment. Secondary applications include replacement of worn or damaged original hitch brackets, and modification of non-standard or imported attachments to match the host excavator's dipper arm geometry.\u003c\/p\u003e\n\u003ch3\u003eBrand-Specific Dimensional Engineering — John Deere \u0026amp; Kubota KX Series\u003c\/h3\u003e\n\u003cp\u003eEach model is dimensionally engineered to match the specific dipper arm pin geometry and bracket spacing of its target machine brand and model class:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-JD17\u003c\/strong\u003e — 55×262mm | 4kg | John Deere 17 class mini excavator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-JD35\u003c\/strong\u003e — 108×346mm | 11kg | John Deere 35 class mini excavator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-JD60\u003c\/strong\u003e — 102×413mm | 13kg | John Deere 60 class (6–8T)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-KX121\u003c\/strong\u003e — 95×330mm | 11kg | Kubota KX121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-KX057\u003c\/strong\u003e — 108×433mm | 18kg | Kubota KX057\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-KX080\u003c\/strong\u003e — 111×458mm | 27kg | Kubota KX080\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-KX040\u003c\/strong\u003e — 113×330mm | 13kg | Kubota KX040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-U17\u003c\/strong\u003e — 122×247mm | 7kg | Universal 1–2.5T mini excavator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-U25\u003c\/strong\u003e — 87×216mm | 7kg | Universal 1–2.5T mini excavator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrecision Pin Bore \u0026amp; Bracket Face — Accurate Alignment After Welding\u003c\/h3\u003e\n\u003cp\u003eThe precision-machined pin bore and bracket face geometry ensures \u003cstrong\u003eaccurate alignment with the dipper arm pins and quick hitch coupler interface after welding\u003c\/strong\u003e, without the need for post-weld machining or adjustment. The bracket material is selected for weldability with standard structural steel bucket bodies. Welding should be performed by a qualified structural welder using appropriate filler material and preheat procedures for the bucket steel specification to ensure full penetration and adequate heat-affected zone toughness at the weld joint.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts existing pin-on buckets \u0026amp; attachments to quick hitch compatibility\u003c\/li\u003e\n\u003cli\u003eEliminates need to purchase new quick hitch-compatible attachments\u003c\/li\u003e\n\u003cli\u003eNine models — John Deere 17\/35\/60, Kubota KX040\/057\/080\/121, plus universal ME-U17 \u0026amp; ME-U25\u003c\/li\u003e\n\u003cli\u003eBrand-specific dimensional engineering — matched to JD \u0026amp; Kubota KX dipper arm pin geometry\u003c\/li\u003e\n\u003cli\u003ePrecision-machined pin bore — accurate alignment after welding, no post-weld machining\u003c\/li\u003e\n\u003cli\u003eSelected for weldability with standard structural steel bucket bodies\u003c\/li\u003e\n\u003cli\u003eAlso suits: worn bracket replacement \u0026amp; non-standard attachment conversion\u003c\/li\u003e\n\u003cli\u003eUniversal models available for other mini excavator brands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003eHeight (mm)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-JD17\u003c\/td\u003e\n\u003ctd\u003e55\u003c\/td\u003e\n\u003ctd\u003e262\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eJohn Deere 17 class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-JD35\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003ctd\u003e346\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eJohn Deere 35 class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-JD60\u003c\/td\u003e\n\u003ctd\u003e102\u003c\/td\u003e\n\u003ctd\u003e413\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eJohn Deere 60 class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-KX121\u003c\/td\u003e\n\u003ctd\u003e95\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003eKubota KX121\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-KX057\u003c\/td\u003e\n\u003ctd\u003e108\u003c\/td\u003e\n\u003ctd\u003e433\u003c\/td\u003e\n\u003ctd\u003e18\u003c\/td\u003e\n\u003ctd\u003eKubota KX057\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-KX080\u003c\/td\u003e\n\u003ctd\u003e111\u003c\/td\u003e\n\u003ctd\u003e458\u003c\/td\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003ctd\u003eKubota KX080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-KX040\u003c\/td\u003e\n\u003ctd\u003e113\u003c\/td\u003e\n\u003ctd\u003e330\u003c\/td\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eKubota KX040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-U17\u003c\/td\u003e\n\u003ctd\u003e122\u003c\/td\u003e\n\u003ctd\u003e247\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eUniversal 1–2.5T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-U25\u003c\/td\u003e\n\u003ctd\u003e87\u003c\/td\u003e\n\u003ctd\u003e216\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eUniversal 1–2.5T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501083734261,"sku":"E-JD17","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803173138_001.jpg?v=1785749537"},{"product_id":"landyindus-excavator-hydraulic-brush-cutter-mulcher-72-1830mm-s45-4-6-ton-land-clearing","title":"LANDYINDUS Excavator Hydraulic Brush Cutter Mulcher 72\" 1830mm | S45 | 4–6 Ton Land Clearing","description":"\u003ch2\u003eLANDYINDUS E-BC1830 Excavator Hydraulic Brush Cutter Mulcher 72\" 1830mm | S45 | 4–6 Ton Land Clearing\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS E-BC1830 Excavator Hydraulic Brush Cutter\u003c\/strong\u003e is a professional-grade land clearing and vegetation management attachment engineered for 4–6 tonne excavators fitted with the S45 bracket standard, delivering a \u003cstrong\u003e1,830 mm (72 inch) working width\u003c\/strong\u003e for efficient, high-productivity clearing of grass, saplings, dense shrubs, light scrub, and woody vegetation in a single pass. Suited to road and highway verge maintenance, railway corridor clearing, powerline and utility easement management, civil construction site preparation, forestry land clearing, and agricultural land reclamation — the E-BC1830 maximises clearing productivity per machine hour and minimises the number of passes required to clear a given area compared to narrower competitive attachments in the same excavator weight class.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Stump Jumper — Protects Gearbox \u0026amp; Blade Carrier from Hidden Ground Obstacles\u003c\/h3\u003e\n\u003cp\u003eThe defining technical feature of the E-BC1830 is the \u003cstrong\u003eintegrated stump jumper assembly\u003c\/strong\u003e fitted between the cutting blades and the deck — a robust, dome-shaped steel deflector that sits directly above the blade plane and protects the gearbox, blade carrier, and deck structure from the sudden, high-impact shock loads generated when the rotating blade system contacts buried stumps, rocks, root balls, and other solid ground-level obstacles. The stump jumper deflects obstacles away from the blade path before contact occurs, allowing the attachment to continue operating through terrain with hidden ground obstacles \u003cstrong\u003ewithout stopping, without operator intervention, and without the risk of catastrophic blade or gearbox failure\u003c\/strong\u003e that characterises brush cutters without this protection system.\u003c\/p\u003e\n\u003ch3\u003e75mm Wide × 8mm Thick Blades — Heavier Gauge Than Competitive Alternatives\u003c\/h3\u003e\n\u003cp\u003eThe cutting system uses blades measuring \u003cstrong\u003e75 mm in width and 8 mm in thickness\u003c\/strong\u003e — significantly heavier than the 4–6 mm blades used in lighter-duty competitive attachments. The 8 mm blade thickness provides greater resistance to bending, chipping, and fatigue cracking under continuous high-cycle cutting loads, extending blade service life between replacement intervals and reducing the total cost of consumables over the operational life of the attachment on high-intensity clearing projects.\u003c\/p\u003e\n\u003ch3\u003e16 MPa \/ 75 LPM — S45 Direct Pin-On \u0026amp; Quick Hitch Compatible\u003c\/h3\u003e\n\u003cp\u003eThe E-BC1830 operates at \u003cstrong\u003e16 MPa hydraulic pressure with a flow requirement of 75 LPM\u003c\/strong\u003e, compatible with the standard auxiliary hydraulic circuits of 4–6 tonne excavators in the S45 bracket class. The S45 bracket interface provides direct pin-on compatibility and can be used with S45-compatible quick hitch coupler systems for rapid attachment and detachment without manual pin removal. The complete attachment measures \u003cstrong\u003e1,830 × 1,706 × 683 mm and weighs 497 kg\u003c\/strong\u003e — appropriate for the 4–6 tonne excavator class, ensuring adequate machine stability and hydraulic flow capacity during continuous clearing operations.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1,830mm (72\") working width — full-sweep single-pass clearing for maximum productivity\u003c\/li\u003e\n\u003cli\u003eIntegrated stump jumper — protects gearbox \u0026amp; blade carrier from buried stumps \u0026amp; rocks\u003c\/li\u003e\n\u003cli\u003e75mm × 8mm blades — heavier gauge than 4–6mm competitive alternatives\u003c\/li\u003e\n\u003cli\u003eExtended blade service life — lower consumable cost on high-intensity clearing projects\u003c\/li\u003e\n\u003cli\u003e16 MPa \/ 75 LPM — compatible with standard S45 excavator auxiliary hydraulic circuits\u003c\/li\u003e\n\u003cli\u003eS45 direct pin-on \u0026amp; quick hitch coupler compatible\u003c\/li\u003e\n\u003cli\u003e497kg — matched to 4–6T excavator lift capacity and stability envelope\u003c\/li\u003e\n\u003cli\u003eSuited to road verge, powerline easement, forestry \u0026amp; agricultural land reclamation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803173410_006.jpg?v=1785749885\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDimensions (W×D×H) mm\u003c\/th\u003e\n\u003cth\u003eWorking Width (mm)\u003c\/th\u003e\n\u003cth\u003eBlade Width (mm)\u003c\/th\u003e\n\u003cth\u003eBlade Thickness (mm)\u003c\/th\u003e\n\u003cth\u003ePressure (MPa)\u003c\/th\u003e\n\u003cth\u003eFlow (LPM)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-BC1830(72IN)-S45\u003c\/td\u003e\n\u003ctd\u003e1830×1706×683\u003c\/td\u003e\n\u003ctd\u003e1620\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e16\u003c\/td\u003e\n\u003ctd\u003e75\u003c\/td\u003e\n\u003ctd\u003e497\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501095039221,"sku":"E-BC1830(72IN)-S45","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803173410_001.jpg?v=1785749903"},{"product_id":"landyindus-excavator-narrow-trenching-bucket-250-600mm-s30-s70-1-18-ton-cable-pipe-laying","title":"LANDYINDUS Excavator Narrow Trenching Bucket | 250–600mm | S30–S70 | 1–18 Ton Cable \u0026 Pipe Laying","description":"\u003ch2\u003eLANDYINDUS Excavator Narrow Trenching Bucket | 250–600mm | S30–S70 | 1–18 Ton Cable \u0026amp; Pipe Laying\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Excavator Narrow Trenching Bucket\u003c\/strong\u003e is a purpose-engineered digging attachment designed specifically for the precision excavation of narrow trenches required for underground cable laying, pipe installation, drainage works, conduit routing, fibre optic installation, and any civil or utility application where trench width must be minimised to reduce excavation volume, limit surface disruption, and control the cost of backfilling and reinstatement. Available in six width configurations from \u003cstrong\u003e250 mm to 600 mm\u003c\/strong\u003e and compatible with excavators from 1 to 18 tonnes across the S30 to S70 bracket range, the trenching bucket series provides a comprehensive narrow-trench solution for utility contractors, civil construction companies, telecommunications infrastructure crews, and drainage specialists.\u003c\/p\u003e\n\u003ch3\u003ePrecision Trench Geometry — Clean Vertical Sidewalls, Minimal Over-Excavation\u003c\/h3\u003e\n\u003cp\u003eA purpose-built narrow trenching bucket produces \u003cstrong\u003eclean, vertical sidewalls with minimal over-excavation\u003c\/strong\u003e and a consistent trench profile from surface to formation level — critical for cable and pipe installations where the trench must meet specified width tolerances for bedding material placement, pipe surround compaction, and regulatory compliance. The narrow profile also minimises the volume of spoil generated per linear metre of trench, reducing spoil removal costs and the volume of backfill material required for reinstatement — a significant cost saving on long-run cable and pipe laying projects where trench length is measured in hundreds or thousands of metres.\u003c\/p\u003e\n\u003ch3\u003eDeep Profile Geometry — Full Trench Depth in a Single Pass\u003c\/h3\u003e\n\u003cp\u003eThe deep profile geometry maximises the volume of material removed per digging cycle relative to the narrow bucket width. The extended bucket depth allows the operator to \u003cstrong\u003ereach the required trench depth in one clean digging motion\u003c\/strong\u003e, extract a full column of material from surface to formation, and deposit it cleanly to the spoil heap in a single cycle — minimising digging cycles per linear metre, reducing machine hours per metre of completed trench, and maximising productivity on long-run trenching projects where cycle time directly determines daily output and project cost.\u003c\/p\u003e\n\u003ch3\u003ePlate Thickness Specified by Excavator Class — 6mm to 10mm\u003c\/h3\u003e\n\u003cp\u003eSteel plate thickness is specified according to the operating weight and digging force of the host excavator, ensuring the bucket structure is neither over-engineered for light machines nor under-specified for heavy-duty applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1–6T models\u003c\/strong\u003e — 6mm main plate | soft to medium ground conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6–8T models\u003c\/strong\u003e — 6–8mm main plate | commercial utility \u0026amp; civil trenching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–14T model\u003c\/strong\u003e — 8mm main plate | hard ground \u0026amp; compacted clay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16–18T model\u003c\/strong\u003e — 10mm main plate | rocky soil \u0026amp; maximum digging force applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSix Models — 1T to 18T Excavator Classes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-02T.TRB.250-S30\u003c\/strong\u003e — 250mm wide | 250×695×550mm | 6mm plate | 0.03m³ | S30 | 48kg | Suits 1–2T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-03T.TRB.270-S40\u003c\/strong\u003e — 270mm wide | 270×711×608mm | 6mm plate | S40 | 53kg | Suits 2–3.5T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME-06T\u003c\/strong\u003e — 300mm wide | S45 | 112kg | Suits 4–6T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-08T\u003c\/strong\u003e — 400mm wide | S50 | 186kg | Suits 6–8T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-14T\u003c\/strong\u003e — 500mm wide | S60 | 316kg | Suits 10–14T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-18T\u003c\/strong\u003e — 600mm wide | S70 | 563kg | Suits 16–18T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e250–600mm widths — six configurations matched to trench specification requirements\u003c\/li\u003e\n\u003cli\u003eClean vertical sidewalls — meets width tolerances for cable, pipe \u0026amp; conduit bedding\u003c\/li\u003e\n\u003cli\u003eDeep profile — full trench depth in a single digging pass\u003c\/li\u003e\n\u003cli\u003eMinimises spoil volume \u0026amp; backfill cost on long-run trenching projects\u003c\/li\u003e\n\u003cli\u003ePlate thickness 6–10mm — specified by excavator class and ground conditions\u003c\/li\u003e\n\u003cli\u003eS30, S40, S45, S50, S60, S70 bracket options — suits 1–18T excavators\u003c\/li\u003e\n\u003cli\u003eTooth and side cutter options available for hard ground applications\u003c\/li\u003e\n\u003cli\u003eNo dedicated trenching machine required — uses excavator already on site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Drawing:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803174354_006.png?v=1785750826\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eWidth (mm)\u003c\/th\u003e\n\u003cth\u003ePlate Thickness (mm)\u003c\/th\u003e\n\u003cth\u003eBracket\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003cth\u003eSuit Excavator (T)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-02T.TRB.250-S30\u003c\/td\u003e\n\u003ctd\u003e250\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS30\u003c\/td\u003e\n\u003ctd\u003e48\u003c\/td\u003e\n\u003ctd\u003e1–2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-03T.TRB.270-S40\u003c\/td\u003e\n\u003ctd\u003e270\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS40\u003c\/td\u003e\n\u003ctd\u003e53\u003c\/td\u003e\n\u003ctd\u003e2–3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eME-06T\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eS45\u003c\/td\u003e\n\u003ctd\u003e112\u003c\/td\u003e\n\u003ctd\u003e4–6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-08T\u003c\/td\u003e\n\u003ctd\u003e400\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eS50\u003c\/td\u003e\n\u003ctd\u003e186\u003c\/td\u003e\n\u003ctd\u003e6–8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-14T\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eS60\u003c\/td\u003e\n\u003ctd\u003e316\u003c\/td\u003e\n\u003ctd\u003e10–14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-18T\u003c\/td\u003e\n\u003ctd\u003e600\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eS70\u003c\/td\u003e\n\u003ctd\u003e563\u003c\/td\u003e\n\u003ctd\u003e16–18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48501102739701,"sku":"ME-02T.TRB.250-S30","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260803174354_001.png?v=1785750847"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/collections\/Gemini_Generated_Image_xsucwcxsucwcxsuc.jpg?v=1784274519","url":"https:\/\/www.landyindus.com\/collections\/excavator-attachments.oembed?page=2","provider":"landyindus","version":"1.0","type":"link"}