LANDYINDUS 2 Inch Pallet Fork Hitch Receiver Dual Fork Trailer Hitch Adapter Class III & IV G-FTH2

Convert your forklift or telehandler into a heavy-duty, balanced towing powerhouse with the LANDYINDUS 2 Inch Pallet Fork Hitch Receiver (Model: G-FTH2). Engineered to slide over both forklift tines simultaneously and clamp down via heavy-duty turn knobs, this dual-pocket adapter accepts all standard 2-inch Class III and Class IV hitch inserts—enabling safe, wobble-free maneuvering of large trailers, campers, boat carriers, and farm implements without needing a dedicated tow vehicle.

Product Overview

Single-tine hitch adapters concentrate towing and tongue forces onto one fork blade, creating uneven mast torque and dangerous tire scrub during turns. The LANDYINDUS G-FTH2 bridges across both fork tines with a 180mm center-to-center spacing, distributing pushing, pulling, and downward tongue loads evenly across your machine's entire fork carriage. Built from 18kg of reinforced structural steel, it installs in seconds with zero welding or permanent fork alterations.

Core Selling Points

Dual-Tine Balanced Load Distribution

By securing across two fork tines simultaneously, this adapter eliminates one-sided mast strain, providing exceptional tracking, braking control, and stability when repositioning heavy equipment trailers in tight yards.

Accommodates Fork Blades up to 5" Wide

Engineered with oversized 140 × 32mm fork pockets on 180mm centers, it slides smoothly over standard commercial pallet fork blades up to 5 inches wide on standard forklifts, telehandlers, and tractor loaders.

Universal 2" Class III & IV Receiver Fitment

The precision-welded 2-inch square receiver tube accepts standard drop ball mounts, pintle hooks, weight-distribution shanks, and tow eyelets for complete towing versatility across your fleet.

Heavy-Duty Turn Knob Clamps & Locking Pins

Dual threaded T-handle turn knobs press firmly against the fork blades, while safety retention pins prevent forward slipping during sudden stops or downhill towing passes.

Specifications

Technical Drawing

⚠️ Safety & Compatibility Warnings

• Dual Knob Tightening: Ensure both turn knobs are torqued down firmly against the fork tines before hitching any trailer load. Re-inspect knob tension after moving initial loads.
• Mast Safety Chain: Always secure a safety chain or heavy ratchet strap from the adapter assembly back to the forklift mast carriage to prevent forward movement off the fork tips during deceleration.
• Fork Spacing Verification: Verify your forklift tine width (max 140mm) and tine thickness (max 32mm) fit within the pocket specifications before placing into service.
• Low-Speed Yard Towing Only: Engineered exclusively for off-highway yard spotting, implement positioning, and facility maneuvering. Not rated for high-speed road transit.