LANDYINDUS 72" Direct Drive Skid Steer Brush Cutter | High Flow | 4 × 8mm Serrated Blades | Heavy Duty Land Clearing | MP1140

LANDYINDUS S-BCS1830(72IN)-MP1140 72" Direct Drive Skid Steer Brush Cutter | High Flow | 4 × 8mm Serrated Blades | Heavy Duty Land Clearing | MP1140 Universal Quick Attach

The LANDYINDUS S-BCS1830 72" Direct Drive Skid Steer Brush Cutter is a heavy-duty brush mower attachment engineered for professional land clearing, vegetation management, and site preparation with high-flow skid steer loaders. Unlike belt-driven or gear-driven alternatives, the direct-drive hydraulic motor delivers power directly to the cutting rotor — resulting in higher torque efficiency, reduced mechanical complexity, and lower long-term maintenance requirements.

Direct-Drive Hydraulic Motor — Higher Torque Efficiency, No Belts or Gears to Wear, Replace, or Adjust

The direct-drive design eliminates the belt and gear transmission components found in conventional brush cutters — removing the most common failure points and maintenance intervals from the drivetrain. Power is transferred directly from the hydraulic motor to the cutting rotor with minimal mechanical loss, delivering higher torque at the blade and more consistent cutting performance across extended work cycles. The preferred choice for operators who run equipment hard and need reliable performance with lower long-term maintenance costs.

4 × 8mm Serrated Wear-Resistant Blades | 1,760mm Working Width — Maximum Vegetation Intake, No Rotor Wrapping

At the heart of this brush mower is a four-blade cutting carriage with serrated blade edges that maximise vegetation intake and prevent material from wrapping around the rotor. Each blade is manufactured from 8mm wear-resistant, high-strength steel — significantly thicker than the 6mm blades found on many competing attachments — delivering longer service life and sustained cutting performance in abrasive, high-impact conditions. The 1,760mm working width allows operators to clear large areas efficiently in fewer passes.

High Flow 75 LPM | 18 MPa | 633kg — Ground-Following Stability on Uneven Terrain

Rated for high-flow hydraulic systems operating at up to 75 LPM and 18 MPa, ensuring full compatibility with most modern high-flow skid steer loaders. At 633kg with overall dimensions of 1,840 × 2,163 × 565mm, the unit provides the ground-following stability needed for uneven terrain without overloading standard skid steer lift capacities. A rear-mounted safety chain limits deck raise height during transport, protecting both the operator and the host machine.

OEM & Custom Manufacturing Available — Dealers, Rental Fleets & Large-Scale Operators

LANDYINDUS offers full OEM and custom manufacturing options for this brush cutter, including working width, blade specification, hydraulic rating, and branding customisation — an ideal sourcing solution for equipment dealers, rental operators, and large-scale land management contractors.

Key Features

• Direct-drive hydraulic motor — higher torque efficiency, no belts or gears to wear or replace
• 4 × 8mm serrated wear-resistant blades — 8mm vs 6mm on competing attachments, longer service life
• Serrated blade edges — maximum vegetation intake, prevents rotor wrapping
• 1,760mm working width — large area clearance in fewer passes
• High flow 75 LPM | 18 MPa — full compatibility with modern high-flow skid steers
• 633kg — ground-following stability on uneven terrain
• Rear safety chain — limits deck raise height during transport
• 1,840×2,163×565mm — industrial-grade structural dimensions
• OEM & custom manufacturing available — width, blade spec, flow rating & branding
• Universal MP1140 quick attach — high-flow skid steer loaders

Technical Drawing:

Specifications