LANDYINDUS Clamp-On Bucket Hitch Receiver Adapter Class I II to Class III IV Converter 1.25 to 2 Inch G-1.25"-2"

Upgrade your tractor loader bucket's towing capabilities instantly with the LANDYINDUS Clamp-On Bucket Hitch Receiver Adapter (Model: G-1.25"-2"). Specifically engineered to convert Class I or Class II hitch setups into a heavy-duty 2-inch Class III / IV receiver interface, this compact adapter mounts directly to your bucket cutting edge in minutes—without drilling, welding, or permanently altering your equipment.

Product Overview

Most compact utility tractors and light loaders feature small 1.25-inch receiver points or no hitch receiver at all, preventing operators from hooking up standard 2-inch trailer couplers, ball mounts, and heavy farm implements. The LANDYINDUS G-1.25"-2" bridges this gap. Engineered with a built-in vertical offset that compensates for tractor bucket lip angles, it ensures your trailer tongue rides level and secure during farm, ranch, and job site towing.

Core Selling Points

Class I/II to Class III/IV (1.25" to 2") Conversion

Expands your equipment versatility by adapting smaller hitch footprints to accept standard 2" × 2" ball mounts, tow shanks, pintle adapters, and trailer couplers used on full-size trailers.

Engineered Offset Geometry for Level Towing

The raised offset neck compensates for downward bucket lip tilt, maintaining proper coupler alignment and preventing bottoming out on uneven ground during transport.

Dual Pin Hole Adjustment Positions

Features two precision-drilled hitch pin adjustment holes, allowing operators to fine-tune the receiver's forward extension for optimal bumper and bucket clearance.

Compact, Lightweight 4kg Zero-Drill Mounting

Weighing only 4kg with dimensions of 305 × 75 × 151mm, this heavy-gauge steel adapter clamps onto standard bucket lips effortlessly. Disassembly takes under a minute, returning your loader bucket to earthmoving duties without delay.

Specifications

Technical Drawing

⚠️ Safety & Compatibility Warnings

• Duty Rating Notice: Engineered for light-to-medium utility towing, spotting, and implement repositioning. Not intended for continuous high-speed highway transit or severe commercial tongue loads.
• Clamp Bolt Inspection: Verify the clamping bolt is torqued securely against the cutting edge before hitching, and re-check tightness after navigating rough ground.
• Tongue Weight Leveling: Adjust the tractor bucket angle to keep the receiver tube parallel with the ground during transport to prevent excess stress on the adapter throat.
• Hitch Pin Security: Always secure your 2-inch ball mount or insert using a certified 5/8" hitch pin with a safety hairpin cotter.