LANDYINDUS Clamp-On Forklift Hitch Receiver 2 Inch Heavy Duty Steel Adapter for Forklift Tines G-COFH-2IN

Convert your warehouse forklift into a versatile towing and spotting powerhouse in seconds with the LANDYINDUS Clamp-On Forklift Hitch Receiver (Model: G-COFH-2IN). Designed to slide directly over a single standard forklift tine and clamp securely in place, this heavy-duty adapter accepts all standard 2-inch hitch inserts—enabling fast, precise maneuvering of utility trailers, boat trailers, and towable job site equipment without drilling, welding, or complicated rigging.

Product Overview

Shunting trailers around tight yards, warehouse docks, and equipment storage bays using a pickup truck is cumbersome and space-restricted. The LANDYINDUS G-COFH-2IN leverages your forklift’s zero-turn maneuverability and front-facing visibility to spot and reposition trailers effortlessly. Built with a precision-fit 115 × 45mm tine pocket and an oversized T-handle clamp screw, it locks firmly onto your fork blade for a rattle-free towing interface.

Core Selling Points

Universal 2" Standard Receiver Fitment

Accepts all standard 2-inch square hitch accessories, including ball mounts, pintle hooks, weight distribution bars, and recovery D-rings, delivering total versatility across your trailer fleet.

Precision-Machined 115 × 45mm Tine Pocket

Engineered to slide snugly over standard forklift tines up to 115mm wide and 45mm thick. The internal geometry prevents lateral play, ensuring true tracking during pushing and pulling cycles.

Heavy-Duty Steel & Gloss Powder Coat

Fabricated from heavy-gauge structural steel plate and reinforced with solid weld seams. The industrial gloss powder-coated finish provides resilient barrier protection against rust, weather exposure, and hydraulic oils.

100% Tool-Free Clamp-On Installation

Slide the adapter onto either fork tine, hand-tighten the integrated heavy-duty clamp handle, and insert your hitch pin. Weighing only 7kg, it can be attached, removed, or transferred between machines in under thirty seconds.

Specifications

Technical Drawing

⚠️ Safety & Compatibility Warnings

• Clamp Handle Tightening: Ensure the T-handle clamping bolt is fully tightened against the fork tine surface before applying tongue weight or pulling loads.
• Safety Chain Requirement: Always attach a certified safety chain or strap from the adapter/trailer to the forklift mast carriage to prevent the adapter from sliding forward off the fork during abrupt braking.
• Speed & Braking Limits: Use exclusively for low-speed yard maneuvering, spotting, and positioning (under 5 mph). Not intended for high-speed transport or public highway towing.
• Fork Tine Sizing: Verify your forklift tine width and thickness do not exceed the 115 × 45mm pocket dimensions before ordering.