LANDYINDUS Forklift Bucket Attachment | 3,000–4,000kg SWL | 0.76–0.98m³ | Slip-On Fixed Bolt | 6–8mm Steel Plate | 3–4.5T Forklift | Bulk Material Handling | Construction, Agricultural & Industrial | F-CD Series

LANDYINDUS F-CD Series Forklift Bucket Attachment | 3,000–4,000kg SWL | 0.76–0.98m³ | Slip-On Fixed Bolt — Installs in Minutes | 6–8mm High-Strength Steel Plate | 3–4.5T Forklift | Bulk Material Handling | Construction, Agricultural & Industrial

The LANDYINDUS F-CD Series Forklift Bucket Attachment is a heavy-duty slip-on bucket designed for efficient bulk material handling in construction sites, agricultural operations, warehouses, and industrial yards. Built from high-strength steel plate with a main plate thickness of 6–8mm, the F-CD series delivers exceptional durability and a long service life under demanding daily use.

Slip-On Fixed Bolt Installation — No Specialist Tools, Ready in Minutes

The slip-on fork design with fixed bolt securing means installation takes just minutes — slide the bucket over your existing forklift forks and secure in place. No specialist tools or complex setup required. Also compatible with hinged forks for more versatile operational configurations across different site requirements.

Four Models — 3,000–4,000kg SWL, 0.76–0.98 m³, 3–4.5T Forklift

Model Selection Guide — Choose by Forklift Capacity and Material Density

For 3–3.5T forklifts: All three F-CD30 models share the same 145×60mm fork pockets and 715mm centres — select by bucket width and volume required: F-CD30-1400 (0.76m³, 255kg) for tighter site access; F-CD30-1600 (0.87m³, 280kg) for general purpose; F-CD30-1800 (0.98m³, 365kg) for maximum volume per cycle. Note the significant weight step from F-CD30-1600 (280kg) to F-CD30-1800 (365kg) — verify your forklift’s rated capacity covers SWL plus bucket weight.

For 4–4.5T forklifts: The F-CD40-1600 uses 160×65mm fork pockets (larger than the 3T models’ 145×60mm) and an 8mm main plate (vs 6mm on 3T models) — the heavier gauge plate is matched to the higher SWL and larger forklift class. Do not attempt to fit the F-CD40 onto a 3T-class forklift fork pocket.

6–8mm High-Strength Steel Plate — Heavy-Duty Daily Use

The 6mm plate on 3T models and 8mm plate on the 4T model provide the structural integrity required for high-cycle bulk material handling — sand, gravel, aggregate, grain, compost, demolition rubble, and loose industrial materials. The thicker plate on the F-CD40-1600 is matched to the higher clamping forces and impact loads of 4–4.5T class forklift operation.

Applications

• Construction sites — sand, gravel, aggregate, demolition rubble, spoil
• Agricultural operations — grain, compost, manure, feed material
• Warehouses & industrial yards — loose bulk material transfer and loading
• Landscaping — topsoil, bark, mulch, stone
• Recycling & waste — loose waste material handling

Key Features

• 3,000–4,000kg SWL — heavy-duty bulk material handling
• 0.76–0.98m³ — four size configurations
• Slip-on fixed bolt — installs in minutes, no specialist tools
• Hinged fork compatible — versatile operational configurations
• 6–8mm high-strength steel plate — long service life, high-cycle use
• 3–4.5T forklift — all common industrial forklift classes
• 255–365kg | 715mm pocket centres across all models

Technical Drawing: