LANDYINDUS Hydraulic Forklift Snow Bucket | 1.10m³ | Hydraulic Dump from Cab | 12mm Heat-Treated Cutting Edge | 4mm Steel | 16 MPa | 60 LPM | 2–5T Forklift | Yard, Car Park & Airport Apron | F-HSBMT1500
Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
LANDYINDUS F-HSBMT1500 Hydraulic Forklift Snow Bucket | 1.10m³ | Hydraulic Dump from Cab — No Repositioning Required | 12mm Heat-Treated Hardened Steel Cutting Edge | 4mm Heavy-Gauge Steel | 16 MPa | 60 LPM | 2–5T Forklift | Warehouse Yard, Car Park & Airport Apron
The LANDYINDUS F-HSBMT1500 Hydraulic Forklift Snow Bucket is a heavy-duty winter snow removal solution engineered for 2–5 ton forklifts, transforming your existing forklift into a powerful snow clearing machine for warehouses, logistics yards, factory forecourts, car parks, and airport aprons — without the need for dedicated snow removal equipment.
Hydraulic Dump from the Cab — Tip and Empty Without Leaving the Seat
The hydraulic dumping function allows the operator to tip and empty the bucket without leaving the cab, providing safe, efficient snow disposal directly from the forklift seat. This is the defining advantage over the chain-secured mechanical F-SBMT series: once the bucket is full, the operator drives to the disposal point and activates the hydraulic dump in a single controlled motion — no manual tipping, no repositioning the forklift at an angle to gravity-dump, no operator exiting the cab in freezing conditions.
F-SBMT1500 vs F-HSBMT1500 — Mechanical Chain vs Hydraulic Dump, Same Footprint
| Feature | F-SBMT1500 Mechanical | F-HSBMT1500 Hydraulic (This) |
|---|---|---|
| Dump mechanism | Mast tilt — gravity dump | Hydraulic cylinder — cab-controlled dump |
| Hydraulics required | No — chain secured | Yes — 16 MPa / 60 LPM auxiliary circuit |
| Dump control | Mast angle dependent | Fully controlled — precise tip angle from cab |
| Operator leaves cab to dump | No — mast tilt | No — hydraulic lever from seat |
| Dump location flexibility | Limited — mast must clear obstruction | High — tip at any point, any height |
| Width | 1,500mm | 1,500mm — same |
| Volume | 1.10m³ | 1.10m³ — same |
| Fork pocket | 170×70mm / 830mm centres | 170×70mm / 830mm centres — same |
| Weight | 263kg | 300kg — hydraulic cylinder added |
| Best for | Any forklift, no aux hydraulics | Hydraulic forklift, precise dump control, high-cycle |
12mm Heat-Treated Hardened Steel Cutting Edge — Same Specification as F-SBMT Series
The 12mm heat-treated hardened steel cutting edge delivers exceptional wear resistance and clean, efficient snow scraping performance — outlasting standard mild steel edges by a significant margin. Withstands repeated impacts with hidden kerbs, drain covers, expansion joints, and frozen ground without deforming or chipping.
4mm Heavy-Gauge Steel Plate | 1.10m³ | 1,500mm Wide
Constructed from 4mm heavy-gauge steel plate throughout, the F-HSBMT1500 is built to withstand the repeated impact and abrasion of heavy snow and ice removal in demanding outdoor environments. At 1.10m³ and 1,500mm wide, it clears a full lane width in a single pass — matching the F-SBMT1500 footprint with the added advantage of hydraulic dump control.
Fast Slip-On Installation — Same Fork Pockets as F-SBMT1500
The bucket slips directly onto the forklift fork arms via integrated 170×70mm fork pockets (830mm centres) — the same as the F-SBMT1500 — and is secured with a chain around the mast. Ready for operation in minutes. If your forklift already fits the F-SBMT1500, the F-HSBMT1500 fits the same fork pockets.
Applications
- Warehouse & logistics yards — access route clearing, loading dock aprons
- Factory forecourts — wide lane clearing, single-pass efficiency
- Car parks — lane-width clearing with precise dump at snow pile
- Airport aprons — high-cycle, precise dump location control
- Commercial facilities — emergency exit and access pathway clearing
Key Features
- Hydraulic dump from cab — precise tip control, no operator exits in freezing conditions
- 12mm heat-treated hardened steel cutting edge — compacted snow & ice, long service life
- 4mm heavy-gauge steel plate — season-after-season durability
- 1.10m³ | 1,500mm wide — full lane-width, single-pass clearing
- 16 MPa | 60 LPM — standard forklift auxiliary hydraulic circuit
- 170×70mm fork pockets | 830mm centres — same as F-SBMT1500
- 300kg | 2–5T forklift | custom sizes available
Technical Drawing:
Specifications
| Model | Dimensions W×D×H (mm) | Plate (mm) | Fork Pocket (mm) | Centres (mm) | Pressure (MPa) | Flow (LPM) | Volume (m³) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| F-HSBMT1500 | 1,500×1,500×750 | 4 | 170×70 | 830 | 16 | 60 | 1.10 | 300 |
• Requires 16 MPa / 60 LPM auxiliary hydraulic circuit — if your forklift has no aux hydraulics, choose F-SBMT1500 or F-SBMT2000 instead.
• Confirm fork dimensions match 170×70mm pockets and 830mm centres.
• Wet packed snow ≈ 400–600kg/m³: full bucket load ≈ 440–660kg snow + 300kg bucket = up to 960kg total — verify forklift rated capacity at load centre. Custom sizes available on request.