LANDYINDUS Hydraulic Salt Spreader | Self-Loading | 350, 800, 1,000 & 1,500L | Anti-Bridging Agitator | 4-Setting Discharge | 6mm Plate | Galvanized | SMS, Euro, Z602 & 3-Point | T-SPR

LANDYINDUS T-SPR Hydraulic Salt Spreader | Self-Loading Front Loader | 350, 800, 1,000 & 1,500L | Anti-Bridging Slanted-Vane Agitator | 4-Setting Stone Release | 6mm Steel | Galvanized Rollers & Agitators | SMS, Euro, Z602 & 3-Point | 16 MPa | 60 LPM

The LANDYINDUS T-SPR Hydraulic Salt Spreader is a self-loading, hydraulically operated front loader attachment engineered for professional-grade spreading of rock salt, coarse sand, salt and sand mixtures, fine gravel, crushed granite, and similar granular materials. Available in four capacities — 350, 800, 1,000, and 1,500 liters — and compatible with SMS, Euro, Z602, and three-point mounting, this spreader serves a wide range of tractor and skid steer loader configurations across agricultural, municipal, and commercial applications.

Self-Loading Design — Load Directly from Stockpile Using Front Loader Bucket, No Manual Filling

The self-loading design sets this hydraulic salt spreader apart from conventional tow-behind or three-point units. The spreader loads directly from a stockpile using the front loader bucket, eliminating the need for manual filling or additional handling equipment. Once loaded, the operator controls spreading speed and output volume from the cab using the machine’s auxiliary hydraulic circuit.

Anti-Bridging Slanted-Vane Agitator — Continuous Material Flow, Damp and Partially Frozen Salt & Sand

One of the most important engineering features of this spreader is the anti-bridging slanted-vane agitator, which continuously breaks up material clumps inside the hopper to prevent bridging — the common problem where material compacts and blocks the discharge outlet, causing uneven spreading or complete flow stoppage. The agitator runs continuously during operation, keeping material flowing freely even with damp or partially frozen salt and sand mixtures that are prone to clumping in cold weather conditions.

4-Setting Stone Release Mechanism — Precise Discharge Rate for Salt, Sand, Mixed Materials

A four-setting stone release mechanism gives operators additional control over material output, allowing the discharge rate to be adjusted in four increments to suit different materials and spreading widths. This level of control is particularly valuable when switching between fine salt, coarse sand, and mixed materials that flow and spread at different rates, ensuring consistent coverage without over-application or material waste.

Precise Hydraulic Speed Control — Real-Time Spread Rate Adjustment from the Cab

Precise hydraulic speed control allows real-time adjustment of spread rate to match ground speed, material type, and coverage requirements — all from the cab without stopping. The spreading rotor is driven by a protected 250cc hydraulic motor via a reinforced 5/8-inch chain and hardened gear transmission, providing reliable power transfer and long service life under continuous heavy use.

6mm Steel Plate | Galvanized Rollers & Agitators — Salt-Resistant Construction for Long Service Life

The hopper body is constructed from high-grade 6mm steel plate for structural rigidity under heavy loads, and the rollers and agitators are fully galvanized for corrosion resistance — a critical feature given that salt is highly corrosive to unprotected steel components. An optional painted or galvanized body finish is available for operators who require additional protection in high-exposure environments.

Four Capacity Options — Match to Machine Size, Route Length and Refill Frequency

T-SPR Hydraulic vs T-SPR250 Wheel-Driven — Which Spreader?

Key Features

• Self-loading — front loader bucket fills hopper, no manual handling
• Anti-bridging slanted-vane agitator — damp and frozen salt/sand, continuous flow
• 4-setting stone release — precise discharge for salt, sand, mixed materials
• Precise hydraulic speed control — real-time spread rate from cab
• 250cc hydraulic motor | 5/8" chain | hardened gear transmission
• 6mm steel plate | galvanized rollers & agitators — salt-resistant
• 350 / 800 / 1,000 / 1,500L | SMS, Euro, Z602 & 3-Point
• 16 MPa | 60 LPM | optional painted or galvanized body finish

Technical Drawing:

Specifications