{"product_id":"landyindus-hydraulic-timber-log-grab-2-or-4-claw-45-tilt-up-to-2-120mm-opening-class-3a-3-3-5t-f-ymj-series","title":"LANDYINDUS Hydraulic Timber Log Grab | 2 or 4 Claw | 45° Tilt | Up to 2,120mm Opening | Class 3A (3–3.5T) | F-YMJ Series","description":"\u003ch2\u003eLANDYINDUS F-YMJ Series Hydraulic Timber Log Grab | 2-Claw \u0026amp; 4-Claw Configurations | 45° Forward \/ 25° Backward Tilt | Up to 2,120mm Opening | Class 3A (3–3.5T) | Requires 2 Auxiliary Hydraulic Circuits\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLANDYINDUS Hydraulic Timber Log Grab\u003c\/strong\u003e is a heavy-duty forklift attachment purpose-built for the safe, efficient, and secure handling of raw logs, sawn timber bundles, loose log offcuts, and wood chips. Available in 2-claw and 4-claw configurations for Class 3A (3–3.5 tonne) forklifts, this hydraulic grab gives a standard counterbalance forklift the gripping power, tilt control, and load security of a purpose-built forestry machine.\u003c\/p\u003e\n\u003ch3\u003e2-Claw vs 4-Claw Configuration — Match the Grab to Your Timber\u003c\/h3\u003e\n\u003cp\u003eThe choice between two-claw and four-claw configurations allows operators to optimise the attachment for specific timber handling environments:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Claw Model (F-YMJ...-2)\u003c\/strong\u003e: A streamlined, lower-weight grab solution optimised for handling \u003cstrong\u003eindividual large-diameter logs and uniform sawn timber bundles\u003c\/strong\u003e. The clean opposing-jaw grip provides excellent penetration and retention where the load is consistent and uniform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Claw Models (F-YMJ...-4)\u003c\/strong\u003e: Adds two additional claw engagement points, creating a multi-point grip pattern. This prevents individual pieces from slipping through the grab when handling \u003cstrong\u003eloose, irregular, or mixed-size timber loads — including log offcuts, wood chips, and bark piles\u003c\/strong\u003e. The 4-claw configuration is essential for high-cycle timber waste processing where load uniformity cannot be guaranteed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIntegrated Hydraulic Tilt — 45° Forward \/ 25° Backward\u003c\/h3\u003e\n\u003cp\u003eThe integrated hydraulic tilt function delivers \u003cstrong\u003e45 degrees of forward tilt and 25 degrees of backward tilt\u003c\/strong\u003e, controlled directly from the forklift cab:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward Tilt (45°)\u003c\/strong\u003e: Enables precise angular placement of log bundles onto processing equipment infeed conveyors, transport vehicle decks, and angled storage racks — eliminating dangerous manual repositioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackward Tilt (25°)\u003c\/strong\u003e: Retains loose timber loads, offcuts, and wood chips securely within the claw assembly during travel across rough sawmill yards and construction site terrain, preventing load loss from the grab during transit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCurved Claw Geometry \u0026amp; Up to 2,120mm Opening Range\u003c\/h3\u003e\n\u003cp\u003eThe curved claw geometry is specifically engineered to conform to the cylindrical profile of individual logs and the irregular outer surface of bundled timber stacks. This distributes clamping force broadly across the contact surface, preventing point-load damage to the timber surface while maintaining a secure mechanical grip.\u003c\/p\u003e\n\u003cp\u003eThe standard models offer a massive \u003cstrong\u003e0 to 2,027mm opening range\u003c\/strong\u003e, while the wide-body 4-claw configuration extends this to \u003cstrong\u003e0 to 2,120mm\u003c\/strong\u003e — accommodating everything from small-diameter plantation softwood to large hardwood sections and wide multi-row sawn timber bundles.\u003c\/p\u003e\n\u003ch3\u003eOptional Bucket Configuration — Grab \u0026amp; Scoop Capability\u003c\/h3\u003e\n\u003cp\u003eThe carriage mounting allows for an \u003cstrong\u003eoptional bucket configuration\u003c\/strong\u003e beneath the timber grab. This enables the operator to switch between grabbing logs\/bundles and scooping loose material (sawdust, wood chips, bark) within the same operational shift, eliminating the need to physically change attachments or deploy a second machine for bucket-based cleanup tasks.\u003c\/p\u003e\n\u003ch3\u003eModel Specifications (Class 3A | 3–3.5 Tonne Forklifts)\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eClaws\u003c\/th\u003e\n\u003cth\u003eDimensions L×W×H (mm)\u003c\/th\u003e\n\u003cth\u003eOpening Range (mm)\u003c\/th\u003e\n\u003cth\u003eTilt (Fwd\/Back)\u003c\/th\u003e\n\u003cth\u003eWeight (kg)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-YMJ3A30-1500-1370-2\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e1,743×1,508×1,132\u003c\/td\u003e\n\u003ctd\u003e0–2,027\u003c\/td\u003e\n\u003ctd\u003e45° \/ 25°\u003c\/td\u003e\n\u003ctd\u003e540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-YMJ3A30-1500-1370-4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e1,743×1,508×1,132\u003c\/td\u003e\n\u003ctd\u003e0–2,027\u003c\/td\u003e\n\u003ctd\u003e45° \/ 25°\u003c\/td\u003e\n\u003ctd\u003e625\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eF-YMJ3A30-1500-1520-4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e1,846×1,508×1,279\u003c\/td\u003e\n\u003ctd\u003e0–2,120 (Wide)\u003c\/td\u003e\n\u003ctd\u003e45° \/ 25°\u003c\/td\u003e\n\u003ctd\u003e630\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHydraulic Integration | 16 MPa \/ 60 LPM\u003c\/h3\u003e\n\u003cp\u003eThe two-circuit hydraulic system operates at a working pressure of 16 MPa with a flow requirement of 60 LPM. This is fully compatible with the auxiliary hydraulic circuits of standard Class 3A counterbalance forklifts. \u003cstrong\u003eTwo auxiliary hydraulic circuits (3rd and 4th valves) are required\u003c\/strong\u003e to operate both the grab and tilt functions independently.\u003c\/p\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSawmills \u0026amp; logging yards\u003c\/strong\u003e — handling raw logs, loading infeed conveyors, and transport vehicles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimber processing plants\u003c\/strong\u003e — moving sawn timber bundles and processing offcuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWood chip \u0026amp; waste facilities\u003c\/strong\u003e — 4-claw models for loose bark, chips, and irregular timber waste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLandscape material suppliers\u003c\/strong\u003e — handling raw timber, stumps, and green waste\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-claw and 4-claw configurations to match uniform vs irregular timber loads\u003c\/li\u003e\n\u003cli\u003eUp to 2,120mm opening range — handles large hardwood and wide bundles\u003c\/li\u003e\n\u003cli\u003e45° forward \/ 25° backward hydraulic tilt — precise placement and safe transport\u003c\/li\u003e\n\u003cli\u003eCurved claw geometry — secures cylindrical logs without point-load damage\u003c\/li\u003e\n\u003cli\u003eOptional bucket configuration for sawdust and loose material scooping\u003c\/li\u003e\n\u003cli\u003eClass 3A carriage mount (3–3.5T forklifts)\u003c\/li\u003e\n\u003cli\u003eRequires 2 auxiliary hydraulic circuits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Drawing\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260902174958_001.jpg?v=1788342619\" alt=\"\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"background-color: #ffebee; border-left: 4px solid #e53935; padding: 12px 16px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ Hydraulic \u0026amp; Compatibility Notes:\u003c\/strong\u003e\u003cbr\u003e1. \u003cstrong\u003e2 Auxiliary Circuits Required\u003c\/strong\u003e: This attachment requires \u003cstrong\u003etwo independent auxiliary hydraulic circuits (3rd and 4th valves)\u003c\/strong\u003e on the forklift to operate both the grabbing and tilting functions. Confirm your forklift has 2 available auxiliary circuits before ordering.\u003cbr\u003e2. \u003cstrong\u003eCarriage Class Verification\u003c\/strong\u003e: Models are specific to ISO Class 3A carriages. Confirm your forklift has a Class 3A carriage and is rated in the 3-3.5T capacity range before ordering.\u003cbr\u003e3. \u003cstrong\u003eLoad De-rating\u003c\/strong\u003e: The attachment weighs up to 630kg and pushes the load centre forward. Always consult your forklift's de-rated capacity chart to ensure safe operation before attempting to lift heavy log bundles.\u003c\/div\u003e","brand":"LANDYINDUS","offers":[{"title":"Default Title","offer_id":48793495961845,"sku":"F-YMJ3A30-1500-1370-2","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/6195\/4293\/files\/DM_20260902174905_001.jpg?v=1788342717","url":"https:\/\/www.landyindus.com\/products\/landyindus-hydraulic-timber-log-grab-2-or-4-claw-45-tilt-up-to-2-120mm-opening-class-3a-3-3-5t-f-ymj-series","provider":"landyindus","version":"1.0","type":"link"}