Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.

LANDYINDUS

LANDYINDUS Hydraulic Tree & Fence Post Puller | 1,360kg Clamping Force | 300mm Tree Diameter | 24mm Teeth | 650mm Arm | Euro & John Deere | 16 MPa | T-TFP

SKU: T-TFP650-EURO

Got questions?

Feel free to get in touch

Ask an expert!

Chat Email +(1) 657-271-9801

LANDYINDUS T-TFP Hydraulic Tree & Fence Post Puller | 1,360kg Clamping Force | Trees up to 300mm Diameter | 24mm Steel Teeth | 650mm Clamp Arm | Euro & John Deere | 16 MPa | 60 LPM | 450–498kg

The LANDYINDUS T-TFP Hydraulic Tree & Fence Post Puller is a heavy-duty loader attachment engineered to remove trees, stumps, deep-rooted vegetation, and fence posts quickly and completely without manual digging or repeated passes. Powered by a hydraulic cylinder delivering 1,360kg of clamping force, this tree root puller drives its jaws deep into the ground around the base of the target, gripping firmly and extracting the entire root system in a single controlled pull.

1,360kg Hydraulic Clamping Force — Entire Root System Extracted in a Single Pull, No Secondary Stump Grinding

The hydraulic cylinder delivers 1,360kg of clamping force, driving the jaws deep into the ground around the base of the tree or post and extracting the entire root system in a single controlled pull. Capable of removing trees up to 300mm in diameter directly from the ground — roots and all, this hydraulic post puller eliminates the need for stump grinding or secondary root removal operations, saving significant time and cost on every job.

24mm Steel Teeth — Penetrates Hard Compacted Soil, Grips Root Masses and Post Bases Without Slipping

The 24mm thick steel teeth are purpose-built to penetrate hard, compacted soil and grip around root masses and post bases with maximum holding power, preventing slippage during extraction even under extreme pulling loads. The reinforced jaw construction distributes clamping force evenly across the full contact area, protecting both the attachment and the material being extracted from damage during the pull.

Tree & Fence Post Puller vs Stump Grinder — Extract Whole vs Grind in Place

Feature T-SG600 Stump Grinder T-TFP Tree & Post Puller (This)
Operation Grinds stump in place — chips remain Extracts entire root system — roots and all
Secondary operation Chip removal may be needed None — hole ready after extraction
Fence posts No Yes — deep-rooted posts extracted whole
Tree diameter Up to 600mm grinding range Up to 300mm extraction
Power source PTO — 15–45HP Hydraulic — 16MPa/60LPM
Mount Cat 1 — 3-point Euro or John Deere — front loader
Best for Large stumps, grinding in place Trees + posts, complete extraction, no residue

Euro vs John Deere — Select by Loader Coupler Type

Feature T-TFP650-EURO T-TFP1240(49IN)-John Deere
Mount Euro coupler John Deere coupler
Clamp arm length 650mm 650mm
Dimensions L×W×H 859×1,240×480mm 1,240×812×536mm
Weight 498kg 450kg
Best for Euro loader operators John Deere tractor operators
⚠️ Hydraulic & Compatibility Requirements: Requires 16 MPa / 60 LPM auxiliary hydraulic circuit. Available in Euro coupler (T-TFP650-EURO) and John Deere coupler (T-TFP1240-John Deere) configurations. Contact us to confirm compatibility with your specific tractor and loader model.

Applications

  • Tree removal — trees up to 300mm diameter, entire root system extracted
  • Fence post removal — deep-rooted wooden, steel, and concrete posts
  • Land clearing — unwanted trees, shrubs, deep-rooted vegetation
  • Property management — old fence line removal, orchard clearing
  • Farm maintenance — windbreak thinning, hedgerow management

Key Features

  • 1,360kg hydraulic clamping force — entire root system in a single pull
  • Trees up to 300mm diameter — no secondary stump grinding required
  • 24mm steel teeth — penetrates hard compacted soil, no slippage under load
  • 650mm clamp arm — deep jaw penetration around root base
  • Euro (498kg) & John Deere (450kg) — no additional modifications
  • 16 MPa | 60 LPM | front loader mount

Technical Drawing:

Specifications

Model Dimensions L×W×H (mm) Clamp Arm (mm) Tooth Thickness (mm) Opening Range (mm) Pressure (MPa) Flow (LPM) Mount Weight (kg)
T-TFP650-EURO 859×1,240×480 650 24 6 16 60 Euro 498
T-TFP1240(49IN)-John Deere 1,240×812×536 650 24 6 16 60 John Deere 450