LANDYINDUS PTO Stump Grinder | 600mm Range | 23.6" Flywheel | 20 Tungsten Carbide Teeth | Independent PTO | Cat 1 | 15–45HP | 3-Point | T-SG600

LANDYINDUS T-SG600 PTO Stump Grinder | 600mm Grinding Range | 23.6" Solid Steel Flywheel | 20 Tungsten Carbide Cutting Teeth | Independent PTO | Cat 1 | 15–45HP Compact Tractor | 3-Point Hitch | 207kg

The LANDYINDUS T-SG600 is a 3-point hitch PTO stump grinder engineered for compact tractors in the 15 to 45 horsepower range, with a maximum grinding range of 600mm diameter for efficient removal of tree stumps and root systems across a wide range of stump sizes typical of residential, agricultural, and light commercial land clearing operations. Designed to connect directly to the tractor’s Category 1 three-point hitch system, the T-SG600 eliminates the need for a dedicated self-propelled stump grinder, delivering professional stump removal capability without the cost and logistics of hiring or owning a separate piece of equipment.

23.6" Solid Steel Grinding Flywheel | 20 Tungsten Carbide Teeth — Hardwood Stumps, Dense Root Crowns, Embedded Root Systems

The 23.6-inch solid steel grinding flywheel provides the rotational mass and blade tip speed required to grind through hardwood stumps, dense root crowns, and embedded root systems in a controlled, progressive cutting action. The flywheel carries 20 industrial-grade tungsten carbide cutting teeth, a material chosen for its exceptional hardness and wear resistance under the high-impact, abrasive conditions generated during stump grinding. Tungsten carbide teeth maintain their cutting edge significantly longer than standard steel alternatives, reducing the frequency of tooth replacement and the associated downtime and maintenance cost over the working life of the attachment.

Independent PTO — Control Ground Speed and Flywheel Speed Separately, Prevents Flywheel Stall on Dense Stumps

The T-SG600 is optimized for use with an independent PTO shaft system, which allows the operator to control tractor ground speed and PTO rotation speed independently of each other. This independent control is critical for stump grinding because it allows the operator to slow the tractor’s forward movement to match the grinding rate of each specific stump without reducing the flywheel speed, maintaining consistent cutting power throughout the grinding pass. The result is smoother, more controlled material removal with less risk of flywheel stall or overload on dense or irregularly shaped stumps compared to non-independent PTO configurations.

Ground Ready After Grinding — No Additional Excavation or Root Removal Required

Once a stump is ground down, the prepared ground is immediately ready for grading, topsoil application, turf laying, planting, or construction work without requiring additional excavation or root removal steps. This makes the T-SG600 particularly valuable for land preparation projects where the cleared area needs to be put to productive use quickly after stump removal.

T-SG600 vs Hired Self-Propelled Stump Grinder — Tractor Attachment vs Dedicated Machine

Key Features

• 600mm grinding range — residential, agricultural and light commercial stump sizes
• 23.6" solid steel flywheel — rotational mass for hardwood and dense root crowns
• 20 tungsten carbide teeth — longer cutting edge life vs standard steel
• Independent PTO — separate ground speed and flywheel speed control, prevents stall
• Cat 1 | 3-point hitch | 15–45HP compact tractor | 207kg
• Ground ready after grinding — no additional excavation required
• Eliminates hire cost and logistics of self-propelled stump grinder

Technical Drawing:

Specifications